Form 446 North American Free Trade Argreement Verification of Ori

North American Free Trade Agreement (NAFTA) Certificate of Origin

CBP Form 446_0

NAFTA Verification of Origin Quesionnaire

OMB: 1651-0098

Document [pdf]
Download: pdf | pdf
OMB No. 1651-0098
Exp. 10-31-2016

DEPARTMENT OF HOMELAND SECURITY

U.S. Customs and Border Protection

NAFTA VERIFICATION OF ORIGIN QUESTIONNAIRE
19 CFR 181.72

This questionnaire is sent to you pursuant to 19 CFR 181.72, The questionnaire will be used in
determining if the
described on the NAFTA Certificate of Origin (CO) dated

and signed by

originates under the NAFTA. If necessary, additional information may be requested at a later date.

EXPORTER

If this box is checked, you are being sent this questionnaire as the exporter
of the imported good. If you relied upon a Certificate of Origin or written
representation from the Producer to prepare your Certificate of Origin,
provide a copy of what it was that you relied upon, and then go directly to
Section V and complete it. If you relied upon your knowledge of the good,
complete the questionnaire.

PRODUCER OF GOOD

If this box is checked, you are being sent this questionnaire as the producer
of the imported good.
The good was exported by
Complete the questionnaire.

EXPORTER/PRODUCER

If this box is checked, you are being sent this questionnaire as the exporter
and also the producer of the imported good. Complete the questionnaire.

PRODUCER OF MATERIAL
If this box is checked, you are being sent this questionnaire because
identified you as the producer of the
material(s) used in the production of the good described above. Complete
the questionnaire.

You have until
to return the completed and signed questionnaire to the requesting CBP office. You may fax your response. If a
reply cannot be made by this date, please contact the CBP office by mail, telephone, or fax. If additional space is needed for your response, attach additional
pages as needed. When the verification is completed, the exporter/producer will receive a written determination of the findings. The producer of a verified
material will also be notified of the results of the verification of the material. The confidential business information collected on the questionnaire may only be
disclosed to those authorities responsible for the administration and enforcement of determinations of origin, and of customs and revenue matters.
The questionnaire must be signed and dated by an individual who can certify as to the accuracy of the information provided in the questionnaire. Failure to
complete and return this questionnaire may result in the denial of preferential treatment under the NAFTA.

SECTION I

PRODUCTION PROCESS

Provide a brief description of the production process for the good/material being verified.

SECTION II

NON-ORIGINATING/UNKNOWN MATERIALS OR COMPONENTS

Provide the following information for each non-originating material or component and for each material or component whose origin is unknown, used to
produce the good being verified. If none were used, state "NONE".
Description of the material or component

HS#

HS#

Provide the six digit Harmonized System number or if the rule of origin of the good requires eight digits, supply eight.

CBP Form 446 (04/97)

SECTION III

ORIGINATING MATERIALS OR COMPONENTS

Provide the following information for each originating material or component used to produce the good being verified. If none were used, state "NONE".
Name and Address of the Supplier or, if known,
Description of the material or component
Basis of Originating Status
Name & Address of the Manufacturer

Description of the Material or Component:
If the material or component is self-produced (Self-Produced material or component is a material or component that is produced by the producer of a good
and used in the production of that good) and designated as an intermediate material (Intermediate material is a self-produced material or component,
designated by the producer, that meets the rules of origin and that is incorporated into the final good), place the letter 'D' before the name of the material or
component in the table. If the material or component is self-produced but designated as an intermediate material, then each material used in the production
of this self-produced material or component must be identified separately.
Basis of Originating Status:
Describe type of information (i.e. certificate of origin, affidavit, etc.) which was relied upon to determine the originating status of the material or component.

SECTION IV

ADDITIONAL QUESTIONS

1. Has a classification ruling been issued with respect to any of the materials or components produced?
If yes, provide a copy of the ruling.

Yes

No

2. Was the de minimis provision used to determine whether the good being verified was originating?

Yes

No

3. Is the good being verified an originating fungible good?
If yes, check below which inventory management method you used:

Yes

No

Yes

No

Yes

No

LIFO

FIFO

Average

Specific Identification

4. Did any of the originating materials used in the production of the good qualify as an originating fungible material?
If yes, attach a list of the materials that qualify as originating materials under the fungible materials provisions,
and check below which inventory management method you used:
LIFO

FIFO

Average

Specific Identification

5. Was the sale of the good/material to a related person?
6. If a Regional Value Content (RVC) was used in ascertaining whether the good being verified originates,
identify the method used.

%

7. What was the estimated qualifying percentage for RVC?
8. Was the RVC calculated using accumulation?
If yes, provide the name and address of each supplier.

SECTION V

Transaction
Value

Yes

Net Cost

No

CERTIFICATION

I certify that the information on this document is true and accurate and I assume the responsibility for proving such representations. I understand that I am
liable for any false statements or relevant omissions made on or in connection with this document.
Authorized Signature
Company Name (Print or Type)
Name (Print or Type)

Title (Print or Type)

Telephone

Date (MM/DD/YYYY)

PAPERWORK REDUCTION ACT NOTICE: The requested information is needed
to carry out the terms of the North American Fee Trade Agreement
Implementation Act (NAFTA). NAFTA provides that the CBP administration may
determine by means of a written Implementation Act questionnaire whether a
good imported into its territory qualifies as an originating good. Failure to provide
the requested information may result in the loss of preferential tariff treatment
under the NAFTA.

The estimated average burden associated with this collection of information
is 45 minutes per respondent or recordkeeper depending on individual
circumstances. Comments concerning the accuracy of this burden estimate
and suggestions for reducing this burden should be directed to U.S.
Customs and Border Protection, Information Services Branch, Washington
DC 20229, and to the Office of Management and Budget, Paperwork
Reduction Project (1651-0098), Washington, DC 20503.

CBP Form 446 (04/97)


File Typeapplication/pdf
File Modified2014-10-21
File Created2014-10-21

© 2024 OMB.report | Privacy Policy