FERC-725Z, (Order in RD17-4) Mandatory Reliability Standards: IRO Reliability Standards
Revision of a currently approved collection
No
Regular
Approved without change
10/04/2017
07/17/2017
In accordance with 5 CFR 1320, the information collection is approved for three years.
table that charts list comparision
Inventory as of this Action
Requested
Previously Approved
10/31/2020
05/31/2020
05/31/2020
6,683
0
6,672
49,423
0
49,331
0
0
0
Docket RD17-4. In a Petition dated March 6, 2017, the North American Electric Reliability Corporation (âNERCâ) requested Commission approval for proposed Reliability Standards IRO-002-5 (Reliability Coordination, Monitoring and Analysis) and TOP-001-4 (Transmission Operations). NERC stated that the âproposed Reliability Standards address the Commission directives in Order No. 817 related to: (i) transmission operator monitoring of non-bulk electric system (âBESâ) facilities; (ii) redundancy and diverse routing of transmission operator, balancing authority, and reliability coordinator data exchange capabilities; and (iii) testing of alternative or less frequently used data exchange capabilities.â In addition, NERC requested Commission approval of the retirement of Reliability Standards TOP-001-3 and IRO-002-4. In an order on April 17, 2017, FERC approved the implementation of Reliability Standard TOP-001-4 and the retirement of Reliability Standard TOP-001-3.
NERC states that the proposed âReliability Standards TOP-001-4 and IRO-002-5 build upon the improvements made in the prior versions of those standards to further advance reliability.â Proposed Reliability Standard TOP-001-4, Requirement R10 has been revised to require the transmission operator to monitor non-BES facilities for determining system operating limit exceedances within its transmission operator area, as directed by the Commission in Order No. 817. NERC states that this revision helps to ensure that all facilities that can adversely impact reliability are monitored.
NERC also revised proposed Reliability Standard TOP-001-4 to require that the operatorâs and balancing authorityâs data exchange capabilities for the exchange of real-time data needed for real-time monitoring and analysis have redundant and diversely routed data exchange infrastructure within the entityâs primary control center and that these capabilities be tested for redundant functionality on a regular basis. Similar revisions are reflected in Reliability Standard IRO-002-5 to clarify the obligations of the reliability coordinator. NERC states that these modifications help support reliable operations by preventing a single point of failure in primary control center data exchange infrastructure from halting the flow of real-time data used by operators to monitor and control the BES. NERC requests that the Commission approve proposed Reliability Standards TOP-001-4 and IRO-002-5 as consistent with its directives in Order No. 817 and find that the proposed Reliability Standards are just, reasonable, not unduly discriminatory or preferential, and in the public interest.
FERC approved the proposed standards on 4/17/2017.
$5,481
No
No
No
No
No
No
Uncollected
David O'Conner 202 502-6695
Reginfo record details
No
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
RD17-4_725Z_725A1C_30day_FedReg2017-14908.pdf
RD17-4_30day_20170706-3021.docx
IRO-002-5 (in Docket RD17-4)