2021-2022 - Refusals – All Facility Types

Survey on the Occurrence of Foodborne Illness Risk Factors in Selected Retail and Foodservice Facility Types

Attachment B_Marking Instruction for the RFS Data Collection

2021-2022 - Refusals – All Facility Types

OMB: 0910-0744

⚠️ Notice: This form may be outdated. More recent filings and information on OMB 0910-0744 can be found here:

2021-07-29 - Extension without change of a currently approved collection

Document [pdf]

Download: pdf | pdf

ICR ATTACHMENT B

FDA
RETAIL FOOD PROGRAM
FOODBORNE ILLNESS RISK FACTOR STUDY

MARKING INSTRUCTIONS
FOR THE
DATA COLLECTION FORM

June 6, 2016

Table of Contents
I.

ESTABLISHMENT INFORMATION / DATA ............................................................................................. 3
A.
ESTABLISHMENT INFORMATION – RESTAURANTS ................................................................... 5
Industry Segment ............................................................................................................................................................ 5
Data Collection Information............................................................................................................................................ 6
Establishment Information ............................................................................................................................................. 7
Establishments that are Part of Multi-Unit Operations .................................................................................................. 7

ESTABLISHMENT INFORMATION – HEALTH CARE FACILITIES .............................................. 9

Industry Segment .......................................................................................................................................................... 10
Data Collection Information.......................................................................................................................................... 10
Establishment Information ........................................................................................................................................... 11
Health Care Food Service Management ....................................................................................................................... 12
Information on Inspection Oversight for Health Care Foodservice .............................................................................. 12

ESTABLISHMENT INFORMATION – SCHOOLS ............................................................................ 15

Industry Segment .......................................................................................................................................................... 16
Data Collection Information.......................................................................................................................................... 16
Establishment Information ........................................................................................................................................... 17
Information on School District ...................................................................................................................................... 18
Information on Inspection Oversight for School Foodservice ...................................................................................... 19

ESTABLISHMENT INFORMATION – RETAIL FOOD STORES .................................................... 21

Industry Segment .......................................................................................................................................................... 21
Data Collection Information.......................................................................................................................................... 22
Establishment Information ........................................................................................................................................... 23
Establishments that are Part of Multi-Unit Operations ................................................................................................ 23

II.

INFORMATION ON THE REGULATORY AUTHORITY ................................................................... 32

III.
MANAGER CERTIFICATION ................................................................................................................ 41
A.
Manager Certification – Restaurants; Healthcare Facilities; and Schools ............................................. 41
B.
Manager Certification – Retail Food Stores ........................................................................................... 44
IV.

EMPLOYEE HEALTH POLICY .............................................................................................................. 49

FOODSERVICE FOR HIGHLY SUSCEPTIBLE POPULATIONS........................................................ 55

VI. GENERAL MARKING INSTRUCTIONS ............................................................................................... 59
A.
ORIENTATION TO THE DATA COLLECTION FORM ................................................................... 59
B.
MARKINGS FOR DATA ITEMS AND INFORMATION STATEMENTS ....................................... 61
1

C.
D.

RELATIONSHIP BETWEEN DATA ITEMS AND INFORMATION STATEMENTS .................... 63
COMMENT SECTION FOR EACH DATA ITEM .............................................................................. 67

VII. FOOD PRODUCT TEMPERATURE CHARTS ...................................................................................... 68
A.
DATA ITEMS WITH FOOD PRODUCT TEMPERATURE CHARTS .............................................. 69
B.
SUMMARY – PRODUCT TEMPERATURE CATEGORIES ............................................................ 72
VIII.

FOOD SAFETY MANAGEMENT SYSTEM ASSESSMENTS ......................................................... 75

IX. HANDWASHING FREQUENCY ASSESSMENT ................................................................................. 79
A.
HANDWASHING FREQUENCY ASSESSMENT PROTOCOL........................................................ 79
B.
ASSURING MARKING CONSISTENCY WITH DATA ITEM ......................................................... 80
X.

DATA ITEMS AND INFORMATION STATEMENTS .......................................................................... 81

XI.

Food Code Reference Sheet ..................................................................................................................... 118

Attachment A: Instructions for Conducting the Food Safety Management System Assessment (Poor Personal
Hygiene Risk Factor) .......................................................................................................................................... 127
Attachment B: Instructions for Conducting the Food Safety Management System Assessment (Contaminated
Equipment / Protection from Contamination Risk Factor) ................................................................................. 133
Attachment C: Instructions for Conducting the Food Safety Management System Assessment (Improper
Holding / Time & Temperature Risk Factor) ..................................................................................................... 139
Attachment D: Instructions for Conducting the Food Safety Management System Assessment (Inadequate
Cooking Risk Factor) .......................................................................................................................................... 149
Attachment E: Elements to Consider When Conducting Cooling Assessments and Using Predictive Modeling to
Supplement Actual Observations ........................................................................................................................ 155

I. ESTABLISHMENT INFORMATION / DATA
Four food industry segments are included in FDA’s Retail Food Risk Factor Study.





Restaurants (comprised of Fast Food and Full Service Restaurants)
Health Care (comprised of Hospitals and Long-Term Care Facilities)
Schools (K-12)
Retail Food Store (supermarkets / grocery stores that must have a deli department / operation)

Detailed marking instructions will be provided for each of the sections of the data collections form. With a few
exceptions, the data collection form and data items are the same for each of the four industry segments.
The flow and description of the information sections of the data collection form correspond to the FoodSHIELD
database data entry fields. The FoodSHIELD retail food risk factor study database will be used to maintain,
store, and produce reports for data analysis.
For the purposes of assessing potential correlation between unique features of each of these four industry
segments and control of foodborne illness risk factors, four separate establishment information sections, page
one of the data collection forms, have been developed for the data collection. The following describes each of
the establishment information pages and provides definitions and guidance for completing the data entry fields.

This page intentionally left blank.

A. ESTABLISHMENT INFORMATION – RESTAURANTS
A.

INDUSTRY SEGMENT
B.

Food Safety Management System Risk Factor Category:
Facility Type (Select ONE):

Industry Segment: Restaurants

Fast Food Restaurant
Full Service Restaurant

DATA COLLECTION INFORMATION
Date:

Data Collector:

Time In:

Time Out:

Total Time in Minutes:

Risk Categorization (Select ONE of the following):
2
3
4

ESTABLISHMENT INFORMATION
Establishment Name:
Street Address:
City:

State:

Zip:

Maximum Number of Employees Per Shift:

County:

Number of Employees Present at Time of Visit:

Activity level at the time of visit (Select ONE):
Heavy

Light

Average Number of Meals Per Day:

Moderate

Seating Capacity:

ESTABLISHMENTS THAT ARE PART OF MULTI-UNIT OPERATIONS
Establishment is part of a Multi-Unit Operation:

YES

Number of Individual Units that are part of the Multi-Unit Operation (Enter the number of units provided by the
person in charge):
Ownership of Establishment (Select ONE of the following):
Company-Owned
Franchise
Unsure
If Franchise – number of units owned by the franchisee (Enter the number of units provided by the person in charge):

1. Poor Personal Hygiene
2. Contaminated Equipment / Protection from Contamination
3. Improper Holding / Time and Temperature
4. Inadequate Cooking
 Industry Segment: The FDA Study focuses on four industry segments listed below. The data collector
enters the description of the industry segment within which the data collection was conducted
 Health Care
 Schools
 Restaurants (pre-entered on the restaurant data collection form)
 Retail Food Stores
 Facility Type: Two facility types comprise the restaurant segment of the industry: Fast Food
Restaurants and Full Service Restaurants. The randomly selected facility should have already been
categorized as Fast Food or Full Service Restaurant by the FDA Biostatistics Branch as part of the
random selection process. The data collector should, however, verify that the selected establishment has
been properly categorized as Fast Food or Full Service Restaurant prior to initiating the visit. The data
collector will use the following definitions when confirming the restaurant facility type.
 Full Service Restaurant – A restaurant where customers place their order at their table, are served
their meals at the table, receive the service of the wait staff, and pay at the end of the meal.
 Fast Food Restaurants – Also referred to as quick service restaurants. Any restaurant that is not a
full service restaurant. Customers order and pay for their meals at a counter.
The data collector enters the appropriate restaurant facility type based on the definitions above.
Data Collection Information
 Date: The date on which the data collection was conducted at the randomly selected restaurant.
 Data Collector: First and last name of the individual conducting the data collection and completing the
data collection form.
 Time In: The time the data collection is initiated at the randomly selected facility. Time to prepare for
the data collection and travel time to the restaurant are not included. Military time is used for this entry.
For example if the data collection began at 9:15AM the entry in the time in field would be 0915.
Likewise, if the data collection began at 3:30PM the entry in the time in field would be 1530.
 Time Out: The time data collection observations are completed and include the time to conduct the exit
interview with the person-in-charge. Time to complete the data collection form and enter it into the
database, as well as travel time, are not included. Military time is used for this entry.
 Total Time in Minutes: The total time in minutes needed to conduct the data collection at the
restaurant. It encompasses the difference between the recorded “Time In” entry and the “Time Out”
entry. The database program will automatically calculate total time in minutes based on the data
collector’s entries for “Time In” and “Time Out” but this function is dependent on the use of military
time.
 Risk Categorization: The risk categories listed in Annex 5, Table 1 – Risk Categorization of Food
Establishments of FDA Food Code contain the descriptions used to classify the selected establishments.
An establishment must meet one of the descriptions provided for risk categories 2, 3, or 4. The data
collector should confirm the risk categorization of the establishment when contacting the jurisdiction
with regulatory oversight responsibility prior to initiating the data collection An establishment that falls
into risk category 1 is not eligible for the Study. The data collector must select a substitute from the
restaurant substitution listed provided by FDA’s CFSAN Biostatistics Branch.
6

Establishment Information
 Establishment Name: Business name of the randomly selected restaurant. If the name is different than
the one contained in the GIS database used for the selection of restaurants for the Study, enter the
current name the restaurant is doing business under. NOTE: Should a restaurant name-change be
recorded, the data collector is to notify the study coordinator via e-mail of the name change.
 Street Address: Common street listing for the selected restaurant.
 City: City where the selected restaurant is located.
 Zip: Zip code for the selected restaurant.
 County: County where the selected restaurant is located.
 Maximum Number of Employees Per Shift: The maximum number of food employees that can be
assigned to a designated restaurant work shift regardless of their job responsibility. The data collector
can use the information provided by the person-in-charge.
 Number of Employees Present at Time of Visit – The total number of food employees that are working
in the restaurant at the time of the data collection regardless of their job responsibility. The data
collector can use the information provided by the person-in-charge.
 Activity level at the time of the visit: This element is specific to the activity level occurring in the
kitchen and other food preparation areas at the time of the data collection. Based on high peak volume
periods that occur within the restaurant, the person-in-charge should be asked if the current activity level
in the kitchen is light, moderate or heavy. The data collector checks the appropriate box based on the
response provided by the person-in-charge.
 Average Number of Meals Per Day: The average number of meals per day is to include the total
number served for ALL meal periods during the day. The data collector can use the information
provided by the person-in-charge. In providing an estimate number of meals per day, the person-incharge should base the average on a 7-day, Sunday – Saturday business cycle or weekly cycle. If the
person in charge is unable to provide an estimate on the average number of meals per day, the data
collector is to enter “0” in the data entry field. The “0” entry will denote an “Unsure” response from the
person in charge.
 Seating Capacity: Total number of customer seats provided in the restaurant where dining occurs,
including bar area seating. Seating capacity is to be determined for Fast Food Restaurants as well as Full
Service Restaurants. The data collector does not have to physically count the number of seats provided
but can use the information provided by the person-in-charge.
Establishments that are Part of Multi-Unit Operations
 Establishment is part of a Multi-Unit Operation: The data collector will determine if the restaurant is
part of a multi-unit operation. The data collector can use the information provided by the person-incharge to complete this element.
 YES – Restaurant is part of a multi-unit operation.
 NO – Restaurant is not part of a multi-unit operation.
If the restaurant is part of a multi-unit operation, the data collector will complete the following three
information fields:
 Number of Individual Units that are Part of the Multi-Unit Operation: Represents the total number of
individual restaurants that comprise the multi-unit operation. The total number of food restaurants
includes both company owned and franchise units. The data collector will enter the number of units
provided by the person in charge. If the person in charge is unsure or does not know the number of
units, enter “0”.
7

 Ownership of Establishment: The data collector will complete this information field by selecting ONE
of the following categories and can use the information provided by the person-in-charge for this
element.
 Company Owned – Restaurant is part of multi-unit operation that is a legally incorporated business
association (brand), or owned by an individual or group of individuals. The incorporated business or
individual owns the facility and is responsible for its day-to-day operations.
 Franchise – Restaurant is part of a multi-unit operation that is a legally incorporated business
(brand). The corporation has granted ownership privileges to an individual who is responsible for
the day-to-day operations of the facility. The owner is responsible for operating the facility in
accordance with business specifications outlined by the corporation.
 Unsure – The person-in-charge is not the owner of the restaurant and is unable to confirm whether
the unit is company owned or a franchise.
 IF Franchise – number of units owned by franchisee: Represents the total number of restaurants that
are owned by the individual or group of individuals responsible for the day-to-day operations of the
facility. Restaurants that are part of the multi-unit operation but company owned or associated with
another franchisee are NOT included in this element because they would not be under the direct control
of the franchisee whose establishment has been selected for the Study. The data collector will enter the
number of units provided by the person in charge. If the person in charge is unsure or does not know the
number of units, enter “0”.

B. ESTABLISHMENT INFORMATION – HEALTH CARE FACILITIES
B.

INDUSTRY SEGMENT
C.

Food Safety Management System Risk Factor Category:
Industry Segment: Health Care

Facility Type:
Hospital
Long-term Care Facility

DATA COLLECTION INFORMATION
Date:

Data Collector:

Time In:

Time Out:

Total Time in Minutes:

Risk Categorization: 4
ESTABLISHMENT INFORMATION
Establishment Name:
Street Address:
State:

City:

Zip:

County:

Maximum Number of Employees Per Shift:

Number of Employees Present at Time of Visit:

Activity Level at the Time of Visit (Select ONE):
Heavy

Light

Average Number of Meals:

Total Number of Beds:

Moderate
Current Occupancy:

HEALTH CARE FOOD SERVICE MANAGEMENT
Ownership of Establishment (Select ONE of the following):
Privately-Owned
Publicly-Owned
Establishment is Part of a Multi-Unit Operation:

YES

Number of Individual Units that are Part of the Multi-Unit Operation (Enter the number of units provided by the
person in charge):
Foodservice operation is directly managed by (Select ONE of the following):
Healthcare Establishment Staff
Foodservice Management Company
“Other”
If “Other” describe:

INFORMATION ON INSPECTION OVERSIGHT FOR HEALTHCARE FOODSERVICE
Description of Entity Providing Regulatory or Audit Inspection Oversight:
State Health Department/Agency
County/District/City Health Department/Agency
Other
If “Other” describe:

Industry Segment
 Food Safety Management System Risk Factor Category. Each food establishment selected for the
study will have a food safety management system assessment conducted for one of the four risk factor
areas described below. The Biostatistics Branch will randomly select the risk factor area that will be the
focus of the food safety management system assessment within each of the establishments. The data
collector enters the number associated with the risk factor category for which a food safety management
system assessment has been conducted.’
1. Poor Personal Hygiene
2. Contaminated Equipment / Protection from Contamination
3. Improper Holding / Time and Temperature
4. Inadequate Cooking
 Industry Segment: The FDA Study focuses on four industry segments listed below. The data collector
enters the description of the industry segment within which the data collection was conducted
 Health Care (pre-entered on the Health Care data collection form)
 Schools
 Restaurants
 Retail Food Stores
 Facility Type: Two facility types comprise the health care segment of the industry: Hospitals and
Long-Term Care facilities. The randomly selected facility should have already been categorized as
either a Hospital or Long-Term Care facility by the FDA Biostatistics Branch as part of the random
selection process. The data collector should, however, verify that the selected healthcare facility has
been properly categorized as a Hospital or Long-Term Care facility prior to initiating the visit. The data
collector will use the following definitions when confirming the health care facility type.
 Hospital – A foodservice operation that provides for the nutritional needs of inpatients, by preparing
meals and transporting them to the patient’s room and/or serving meals in a cafeteria setting (meals
in the cafeteria may also be served to hospital staff and visitors).
 Long-Term Care – A foodservice operation that prepares meals for the residents in a group care
living setting such as nursing homes and assisted living centers.
NOTE: For the purposes of this study, health care facilities that do not prepare or serve food to a
highly susceptible population, such as mental health care facilities, are not included in this facility
type category.
The data collector enters the appropriate health care facility type based on the definitions above.
Data Collection Information
 Date: The date on which the data collection was conducted at the randomly selected healthcare facility.
 Data Collector: First and last name of the individual conducting the data collection and completing the
data collection form.
 Time In: The time the data collection is initiated at the randomly selected facility. Time to prepare for
the data collection and travel time to the healthcare facility are not included. Military time is used for
this entry. For example if the data collection began at 9:15AM the entry in the time in field would be
0915. Likewise, if the data collection began at 3:30PM the entry in the time in field would be 1530.
 Time Out: The time data collection observations are completed and include the time to conduct the exit
interview with the person-in-charge. Time to complete the data collection form and enter it into the
database, as well as travel time, are not included. Military time is used for this entry.
 Total Time in Minutes: The total time in minutes needed to conduct the data collection at the healthcare
facility. It encompasses the difference between the recorded “Time In” entry and the “Time Out” entry.
10

The database program will automatically calculate total time in minutes based on the data collector’s
entries for “Time In” and “Time Out” but this function is dependent on the use of military time.
 Risk Categorization: The risk categories listed in Annex 5, Table 1 – Risk Categorization of Food
Establishments of FDA Food Code contain the descriptions used to classify the selected establishments.
Since the foodservice operation in both of the healthcare facility types, Hospitals and Long Term Care
establishments, serve a highly susceptible population, risk category 4 will always be selected. The data
collector should confirm the risk categorization of the healthcare facility when contacting the
jurisdiction with regulatory oversight responsibility prior to initiating the data collection
Establishment Information
 Establishment Name: Business name of the randomly selected healthcare facility. If the name is
different than the one contained in the GIS database used for the selection of establishments for the
Study, enter the current name the healthcare facility is doing business under. NOTE: Should an
establishment name-change be recorded, the data collector is to notify the study coordinator via e-mail
of the name change.
 Street Address: Common street listing for the selected healthcare facility.
 City: City where the selected healthcare facility is located.
 Zip: Zip code for the selected healthcare facility.
 County: County where the selected healthcare facility is located.
 Maximum Number of Employees Per Shift: The maximum number of food employees that can be
assigned to a designated work shift regardless of their job responsibility. The data collector can use the
information provided by the person-in-charge.
 Number of Employees Present at Time of Visit – The total number of food employees that are working
within the health care facility’s foodservice operation at the time of the data collection regardless of their
job responsibility. The data collector can use the information provided by the person-in-charge.
 Activity level at the time of the visit: This element is specific to the activity level occurring in the
kitchen and other food preparation areas at the time of the data collection. Based on high peak volume
periods that occur within the healthcare foodservice operation, the person-in-charge should be asked if
the current activity level in the kitchen is light, moderate, or heavy. The data collector checks the
appropriate box based on the response provided by the person-in-charge.
 Average Number of Meals Per Day: The average number of meals per day is to include the total
number served for ALL meal periods during the day. The data collector can use the information
provided by the person-in-charge. In providing an estimated number of meals per day, the person-incharge should base the average on a 7-day, Sunday – Saturday meal production schedule or weekly meal
production schedule for the admitted patients or residents. If the person in charge is unable to provide an
estimate on the average number of meals per day, the data collector is to enter “0” in the data entry field.
The “0” entry will denote an “Unsure” response from the person in charge.
 Total Number of Beds: The number entered into this data collection field represents that maximum
number of patients for Hospitals or the maximum number of residents for Long-Term Care facilities that
can be cared for at any one time. The data collector does not have to physically count the number of
available beds but can use the information provided by the person-in-charge.
 Current Occupancy: The number entered into this data collection field represents the current number of
patients that have been admitted for stay in the Hospital or Long-Term Care facility at the time of the
data collection.

Health Care Food Service Management
 Ownership of Establishment: The data collector will determine if the healthcare facility is privately or
publicly owned
 Privately Owned – The health care facility is run by individuals, a management group, or company
for profit. Privately owned health care facilities encompass all the for profit businesses that are not
owned or operated by the government.
 Publicly Owned – the health care facility is a state owned entity or government owned
business/corporation that undertakes commercial activities on behalf of the government
 Establishment is part of a Multi-Unit Operation: The data collector will determine if the healthcare
facility is part of a multi-unit operation. The data collector can use the information provided by the
person-in-charge to complete this element.
 YES – Healthcare facility is part of a multi-unit operation.
 NO – Healthcare is not part of a multi-unit operation.
If the healthcare facility is part of a multi-unit operation, the data collector will complete the following
information field:
 Number of Units that are Part of the Multi-Unit Operation: Represents the total number of individual
health care facilities that comprise the multi-unit operation. The data collector will enter the number of
units provided by the person in charge. If the person in charge is unsure or does not know the number of
units, enter “0”.
 Foodservice Operation is Directly Managed by: The data collector will complete this information field
by selecting ONE of the following categories and can use the information provided by the person-incharge for this element.
 Healthcare Establishment Staff – The management of the foodservice operation is under the
direction, and reports directly to, the individuals, management group, or company that owns the
healthcare facility.
 Foodservice Management Company – The management of the foodservice is part of a company that
is separately owned and operated from the healthcare facility. The foodservice management
company has been contracted by the ownership of the healthcare facility to manage and oversee the
day-to-day activities within the foodservice operation.
 Other – The management of the healthcare’s foodservice operation is different than the definitions
provided for “Healthcare Establishment Staff” and “Foodservice Management Company”. If
“Other” is selected the data collector must describe the management structure for the health care
foodservice operation.
Information on Inspection Oversight for Health Care Foodservice
 Description of Entity Providing Regulator or Audit Inspection Oversight: The data collector will
complete this information field by selecting ONE of the following categories to best describe the
regulatory or audit inspection oversight for the healthcare foodservice operation. The data collector can
use the information provided by the person-in-charge for this element.
 State Health Department/Agency – The healthcare foodservice operation is under license/permit of
a state health department or state agency which conducts periodic inspections to assess compliance
with food safety regulatory requirements.
 County/District/City Health Department/Agency – The healthcare foodservice operation is under
license/permit of a county, district, or city health department / agency which conducts periodic
inspections to assess compliance with food safety regulatory requirements.
12

 Other – Includes healthcare foodservice operations that are licensed or permitted by a government
entity that is not considered a State/County/District/City health department or agency. The “Other”
marking should be selected for those facilities whose only inspection oversight of the foodservice
operation is conducted by privately owned companies who perform third party audits. If “Other” is
selected the data collector must describe the regulatory or audit oversight structure for the health
care foodservice operation.

This page intentionally left blank.

C. ESTABLISHMENT INFORMATION – SCHOOLS
C.

INDUSTRY SEGMENT
D.

Food Safety Management System Risk Factor Category:
Type of Operation (Select ONE):

Industry Segment: Schools

Base Kitchen
Onsite Kitchen
Combination Kitchen

DATA COLLECTION INFORMATION
Date:

Data Collector:

Time In:

Total Time in Minutes:

Time Out:

Risk Categorization (Select ONE of the following):
2
3
4

ESTABLISHMENT INFORMATION
Establishment Name:
Street Address:
State:

City:

Zip:

Maximum Number of Employees Per Shift:

Number of Employees Present at Time of Visit:

Activity level at the time of visit (Select ONE):
Heavy
Average Number of Meals Per Day:

Start Grade (Select ONE):
K
4
8
1
5
9
2
6
10
3
7
11

County:

Light

School Type:
Public
Private

Moderate
Charter School:
YES
NO

NSLP Participation:
YES
NO

End Grade (Select ONE):
1
5
9
2
6
10
3
7
11
4
8
12

Is the School foodservice operated by a Food Service Management Company?

YES

Student Enrollment Number:
INFORMATION ON SCHOOL DISTRICT
Name of School District where the Establishment is Located:
Number of Schools that are Part of the School District:
District Enrollment Number:

INFORMATION ON INSPECTION OVERSIGHT FOR SCHOOL FOODSERVICE
Type of Inspection Oversight Conducted for School Foodservice :
State Health Department/Agency
City/County/District Health Department/Agency
Other

Industry Segment
 Food Safety Management System Risk Factor Category. Each food establishment selected for the
study will have a food safety management system assessment conducted for one of the four risk factor
areas described below. The Biostatistics Branch will randomly select the risk factor area that will be the
focus of the food safety management system assessment within each of the establishments. The data
collector enters the number associated with the risk factor category for which a food safety management
system assessment has been conducted.’
1. Poor Personal Hygiene
2. Contaminated Equipment / Protection from Contamination
3. Improper Holding / Time and Temperature
4. Inadequate Cooking
 Industry Segment: The FDA Study focuses on four industry segments listed below. The data collector
enters the description of the industry segment within which the data collection was conducted
 Health Care
 Schools (pre-entered on the School data collection form)
 Restaurants
 Retail Food Stores
 Type of Operation: The data collector will determine whether the type of school foodservice operation
using the following criteria.
 Base Kitchen – A foodservice facility in which all meals are fully prepared in the on-site kitchen.
Some meals are served to students on-site; other meals are shipped to other locations (including
multiple locations within the same school).
 On-site Kitchen – A foodservice operation in which all meals are prepared and served on-site.
 Combination Kitchen – A foodservice operation in which some meals are prepared and served onsite, but some meals are fully or partially prepared in a central or base kitchen.
NOTE: for the purposes of this Study, Central Kitchens prepare meals for serving at receiving/satellite
schools, but do not serve any student meals on-site at the Central Kitchen are not included as part of the
Study sample. In addition, restaurants or other retail food operations that provide meals to school
facilities are not included as part of the Study sample for schools. In addition, receiving or satellite
kitchens that obtain partially or fully prepared meals from a base or central kitchen and conduct little or
no food preparation are not included as part of this Study.
Data Collection Information
 Date: The date on which the data collection was conducted at the randomly selected school.
 Data Collector: First and last name of the individual conducting the data collection and completing the
data collection form.
 Time In: The time the data collection is initiated at the randomly selected facility. Time to prepare for
the data collection and travel time to the school are NOT included. Military time is used for this entry.
For example if the data collection began at 9:15AM the entry in the time in field would be 0915.
Likewise, if the data collection began at 3:30PM the entry in the time in field would be 1530.
 Time Out: The time data collection observations are completed and include the time to conduct the exit
interview with the person-in-charge. Time to complete the Data Collection Form and enter it into the
database, as well as travel time, are NOT included. Military time is used for this entry.
 Total Time in Minutes: The total time in minutes needed to conduct the data collection at the school
foodservice facility. It encompasses the difference between the recorded “Time In” entry and the “Time
Out” entry. The database program will automatically calculate total time in minutes based on the data
16

collector’s entries for “Time In” and “Time Out” but this function is dependent on the use of military
time.
 Risk Categorization: The risk categories listed in Annex 5, Table 1 – Risk Categorization of Food
Establishments of FDA Food Code contain the descriptions used to classify the selected establishments.
An establishment must meet one of the descriptions provided for risk categories 2, 3, or 4. The data
collector should confirm the risk categorization of the establishment when contacting the jurisdiction
with regulatory oversight responsibility prior to initiating the data collection If the establishment falls
into risk category 1; it is not eligible for the Study. The data collector must select a substitute from the
school substitution list provided by FDA’s CFSAN Biostatistics Branch.
Establishment Information
 Establishment Name: Business name of the randomly selected school. If the name is different than the
one contained in the GIS database used for the selection of schools for the Study, enter the current name
the school is operating under. NOTE: Should a school name-change be recorded, the data collector is
to notify the study coordinator via e-mail of the name change.
 Street Address: Common street listing for the selected school.
 City: City where the selected school is located.
 Zip: Zip code for the selected school.
 County: County where the selected school is located.
 Maximum Number of Employees Per Shift: The maximum number of food employees, including
student foodservice volunteers that can be assigned to the school’s foodservice operation regardless of
their job responsibility. The data collector can use the information provided by the person-in-charge.
 Number of Employees Present at Time of Visit – The total number of food employees, including
student foodservice volunteer, that are working in the school’s foodservice operation at the time of the
data collection regardless of their job responsibility. The data collector can use the information provided
by the person-in-charge.
 Activity Level at the Time of Visit: This element is specific to the activity level occurring in the school
kitchen and food preparation areas at the time of the data collection. Based on high peak volume
periods that occur within the establishment, the person-in-charge should be asked if the current activity
level in the kitchen is light, moderate or heavy. The data collector checks the appropriate box based on
the response provided by the person-in-charge.
 Average Number of Meals Per Day: The average number of meals per day is to include the total
number served for ALL meal periods during the day. The data collector can use the information
provided by the person-in-charge. If the person in charge is unable to provide an estimate on the
average number of meals per day, the data collector is to enter “0” in the data entry field. The “0” entry
will denote an “Unsure” response from the person in charge.
 School Type: The data collector will determine whether the school facility is a public or private
institution using the definitions below.
 Public – The foodservice operation prepares and serves meals for an elementary or secondary school
supported by public funds providing for free education for children of a community or district
 Private – The foodservice operation prepares and serves meals for an elementary or secondary
school that is established, conducted, and primarily supported by a nongovernment agency usually
charging students tuition to support educational services.
 Charter School: The data collector will determine whether the facility is Charter School institution
using the following criteria.

 YES – The foodservice operation prepares and serves meals for a public funded independent school
established by teachers, parents, or community groups under the terms of a charter with a local or
national authority.
 NO – The foodservice operation does not prepare or serve meals for a public funded independent
school established by teachers, parents, or community groups under the terms of a charter with a
local or national authority
 National School Lunch Program: The data collector will determine whether the school facility
participates in the National School Lunch Program, a federally assisted meal program operating in
public and not for profit private schools. The USDA Food and Nutrition Service administer the program
at the federal level. At the state level, the National School Lunch Program is usually administered by
state education agencies which operate the program through agreements with school food authorities.
 YES – The foodservice operation prepares and serves meals for an elementary or secondary school
participating in the National School Lunch Program.
 NO – The foodservice operation does not prepare or serve meals for an elementary or secondary
school participating in the National School Lunch Program.
 Start Grade: Indicates the beginning grade level included in the schools educational structure. The data
collector will select the beginning grade level for the school, from K-12. FDA’s CFSAN Biostatistics
Branch has conducted preliminary research and included the beginning grade level for the randomly
selected school on the data collector’s establishment inventory list. The data collector will confirm the
beginning grade level during their data collection at the school facility.
NOTE: A few of the randomly selected schools have a beginning grade level of pre-kindergarten. For
the purposes of this Study, the data collector will check the “K” box for when the beginning grade level
is kindergarten or for a pre-kindergarten age group.
 End Grade: Indicates the last/oldest grade level included in the schools educational structure. The data
collector will select the end grade level for the school, from 1-12. FDA’s CFSAN Biostatistics Branch
has conducted preliminary research and included the end grade level for the randomly selected school on
the data collector’s establishment inventory list. The data collector will confirm the end grade level
during their data collection at the school facility.
NOTE: For the purposes of this Study, the end grade level must be 1 or higher.
 Is the School Foodservice Operated by a Food Service Management Company? – The data collector
will select a YES or NO response based on the following criteria:
 YES - The management of the foodservice is part of a company that is separately owned and
operated from the school facility. The foodservice management company has been contracted by the
administrators of the school facility to manage and oversee the day-to-day activities within the
foodservice operation.
 NO – The foodservice operation is not part of a company that is separately owned and operated from
the school facility.
 Student Enrollment Number: Total number of students enrolled in the school where the foodservice
operation prepares and serves meals. The data collector can use the information provided by the personin-charge of the foodservice operations.
Information on School District
 Name of School District where the Establishment is Located: The FDA CFSAN Biostatistics Branch
has included the name of the school district for the randomly selected school on each of the data
18

collector’s establishment inventory list. The data collector is to confirm the name of the school district
with the person-in-charge of the foodservice operation or school administrator during the data collection.
 Number of Schools that are Part of the School District: The FDA CFSAN Biostatistics Branch has
included the number of schools in the identified school district for the randomly selected school on each
of the data collector’s establishment inventory list. The data collector is to confirm the name of school
district with the person-in-charge of the foodservice operation or school administrator during the data
collection. If the person-in-charge or school administrator is unsure, the data collector should enter the
number of schools provided by the FDA CFSAN Biostatistics Branch on their establishment inventory
list.
 District Enrollment Number: The FDA CFSAN Biostatistics Branch has included the district student
enrollment number randomly selected school on each of the data collector’s establishment inventory list.
The data collector is to confirm the school district enrollment number with the person-in-charge of the
foodservice operation or school administrator during the data collection. If the person-in-charge or
school administrator is unsure, the data collector should enter the district student enrollment number
provided by the FDA CFSAN Biostatistics Branch on their establishment inventory list.
Information on Inspection Oversight for School Foodservice
 Type of Inspection Oversight Conducted for School Foodservice: The data collector will complete this
information field by selecting ONE of the following categories to best describe the regulatory or audit
inspection oversight for the school foodservice operation. The data collector can use the information
provided by the person-in-charge or school administrator for this element.
 State Health Department/Agency – The school foodservice operation is under license/permit of a
state health department or state agency which conducts periodic inspections to assess compliance
with food safety regulatory requirements.
 County/District/City Health Department/Agency – The school foodservice operation is under
license/permit of a county, district, or city health department / agency which conducts periodic
inspections to assess compliance with food safety regulatory requirements.
 Other – Includes school foodservice operations that are licensed or permitted by a government entity
that is not considered a State/County/District/City health department or agency. The “Other”
marking should be selected for those facilities whose only inspection oversight of the foodservice
operation is conducted by privately owned companies who perform third party audits. If “Other” is
selected the data collector must describe the regulatory or audit oversight structure for the school
foodservice operation.

This page intentionally left blank.

D. ESTABLISHMENT INFORMATION – RETAIL FOOD STORES
D.

INDUSTRY SEGMENT
E.

Food Safety Management System Risk Factor Category:
Facility Type (Select ONE):

Industry Segment: Retail Food Store

Deli Department / Operation
Seafood Department / Operation
Produce Department / Operation

DATA COLLECTION INFORMATION
Date:

Data Collector:

Time In:

Total Time in Minutes:

Time Out:

Risk Categorization (Select ONE of the following):
2
3
4

ESTABLISHMENT INFORMATION
Establishment Name:
Street Address:
City:

State:

Zip:

Maximum Number of Employees Per Shift:

County:

Number of Employees Present at Time of Visit:

Activity level at the time of visit (Select ONE):
Heavy

Light

Moderate

ESTABLISHMENTS THAT ARE PART OF MULTI-UNIT OPERATIONS
Establishment is part of a Multi-Unit Operation:

YES

’
1. Poor Personal Hygiene
2. Contaminated Equipment / Protection from Contamination
3. Improper Holding / Time and Temperature
4. Inadequate Cooking
 Industry Segment: The FDA Study focuses on four industry segments listed below. The data collector
enters the description of the industry segment within which the data collection was conducted
 Health Care
 Schools
 Restaurants
 Retail Food Stores (pre-entered on the Retail Food Store data collection form)
 Facility Type: Three departments/operations comprise the retail food store segment of the industry:
Deli Departments/Operations; Seafood Departments/Operations; and Produce Departments/Operations.
The randomly selected retail food store must have a deli department/operation. If the selected retail
food store has a seafood department/operation or a produce department/operation, the data collector will
also conduct a data collection for these areas. Each of the retail food store departments/operations
described below will be entered as separate data collection into the Study database. The data collector
will use the following definitions when entering data for each of the three retail food store
departments/operations.
 Deli – Areas in a retail food store where foods, such as luncheon meats and cheeses, are sliced for
the customers and where sandwiches and salads are prepared on-site or received from a commissary
in bulk containers, portioned, and displayed. Parts of the deli department/operation may include:
● Salad bars, pizza stations, and other food bars managed by the deli department manager.
● Areas where meat and poultry products are cooked and offered for sale as ready-to-eat and
are managed by the deli department manager.
 Seafood – Areas in a retail food store where seafood is cut, prepared, store, or displayed for sale to
the consumer. In retail food stores where the seafood department is combined with another
department (e.g. meat), the data collector will only assess the procedures and practices associated
with the processing of seafood.
NOTE: In-store sushi bars operated and managed as part of the retail food store business are considered
part of the seafood department / operation for the purposes of this Study. If the in-store sushi
bar/operation is under the management and operated by a separate business from the retail food store it,
is not to be included as part of the data collection.
 Produce – Areas in a retail food store where produce is cut, prepared, stored, or displayed for sale to
the consumer. A produce operation may include salad bars or juice stations that are operated under
the same manager who has responsibility for the produce department.
NOTE: Convenience stores are not included as part of the Study sample.
Data Collection Information
 Date: The date on which the data collection was conducted at the randomly selected retail food store.
 Data Collector: First and last name of the individual conducting the data collection and completing the
data collection form.
 Time In: The time the data collection is initiated at the randomly selected facility. Time to prepare for
the data collection and travel time to the retail food store are not included. Military time is used for this
entry. For example if the data collection began at 9:15AM the entry in the time in field would be 0915.
Likewise, if the data collection began at 3:30PM the entry in the time in field would be 1530.
22

 Time Out: The time data collection observations are completed and include the time to conduct the exit
interview with the person-in-charge. Time to complete the data collection form and enter it into the
database, as well as travel time, are not included. Military time is used for this entry.
 Total Time in Minutes: The total time in minutes needed to conduct the data collection at the retail
food store. It encompasses the difference between the recorded “Time In” entry and the “Time Out”
entry. The database program will automatically calculate total time in minutes based on the data
collector’s entries for “Time In” and “Time Out” but this function is dependent on the use of military
time.
 Risk Categorization: The risk categories listed in Annex 5, Table 1 – Risk Categorization of Food
Establishments of FDA Food Code contain the descriptions used to classify the selected retail food store
departments / operations. A retail food store department / operation must meet one of the descriptions
provided for risk categories 2, 3, or 4. The data collector should confirm the risk categorization of the
establishment when contacting the jurisdiction with regulatory oversight responsibility prior to initiating
the data collection If the deli department / operation falls into risk category 1; it is not eligible for the
Study. The data collector must select a substitute from the retail food store substitution listed provided
by FDA’s CFSAN Biostatistics Branch.
Establishment Information
 Establishment Name: Business name of the randomly selected retail food store. If the name is different
than the one contained in the GIS database used for the selection of retail food stores for the Study, enter
the current name the retail food store is doing business under. NOTE: Should a retail food store namechange be recorded, the data collector is to notify the study coordinator via e-mail of the name change.
 Street Address: Common street listing for the selected retail food store.
 City: City where the selected retail food store is located.
 Zip: Zip code for the selected retail food store.
 County: County where the selected retail food store is located.
 Maximum Number of Employees Per Shift: The maximum number of food employees that can be
assigned to a designated retail food store department / operation work shift regardless of their job
responsibility. The data collector can use the information provided by the person-in-charge.
 Number of Employees Present at Time of Visit – The total number of food employees that are working
in the retail food store department / operation at the time of the data collection regardless of their job
responsibility. The data collector can use the information provided by the person-in-charge.
 Activity level at the time of the visit: This element is specific to the activity level occurring in the retail
food store department / operation at the time of the data collection. Based on high peak volume periods
that occur within the retail food store department / operation, the person-in-charge should be asked if the
current activity level in the kitchen is light, moderate or heavy. The data collector checks the
appropriate box based on the response provided by the person-in-charge.
Establishments that are Part of Multi-Unit Operations
 Establishment is part of a Multi-Unit Operation: The data collector will determine if the retail food store
is part of a multi-unit operation. The data collector can use the information provided by the person-incharge to complete this element.
 YES – Retail food store is part of a multi-unit operation
 NO – Retail food store is not part of a multi-unit operation.
If the retail food store is part of a multi-unit operation, the data collector will complete the following
three information fields:
23

 Number of Individual Units that are Part of the Multi-Unit Operation: Represents the total number of
individual retail food stores that comprise the multi-unit operation. The total number of retail food stores
includes both company owned and franchise units. The data collector will enter the number of units
provided by the person in charge. If the person in charge is unsure or does not know the number of units,
enter “0”.
 Ownership of Establishment: The data collector will complete this information field by selecting ONE of
the following categories and can use the information provided by the person-in-charge for this element.
 Company Owned – The retail food store is part of multi-unit operation that is a legally incorporated
business association (brand), or owned by an individual or group of individuals. The incorporated
business or individual owns the facility and is responsible for its day-to-day operations.
 Franchise – The retail food store is part of a multi-unit operation that is a legally incorporated
business (brand). The corporation has granted ownership privileges to an individual who is
responsible for the day-to-day operations of the facility. The owner is responsible for operating the
facility in accordance with business specifications outlined by the corporation.
 Unsure – The person-in-charge is not the owner of the retail food store and is unable to confirm
whether the unit is company owned or a franchise.
 IF Franchise – number of units owned by franchisee: Represents the total number of retail food stores
that are owned by the individual or group of individuals responsible for the day-to-day operations of the
facility. Retail food stores that are part of the multi-unit operation but company owned or associated with
another franchisee are not included in this element because they would not be under the direct control of the
franchisee whose establishment has been selected for the Study. The data collector will enter the number of
units provided by the person in charge. If the person in charge is unsure or does not know the number of
units, enter “0”.

This page intentionally left blank.

II. INFORMATION ON THE REGULATORY AUTHORITY
INFORMATION ON THE REGULATORY AUTHORITY
Name of Jurisdiction with Regulatory Oversight:
Enrolled in FDA Retail Food Program Standards:

YES

Jurisdiction Meets Standard 1 (Select ONE of the following):
YES – Self Reported
YES – Verified by Audit
NO – Jurisdiction does not meet Standard 1

 Name of the Jurisdiction with Regulatory Authority: The name of the agency that has issued the license /
permit to the selected establishment and conducts periodic inspections to assess compliance with applicable
food safety regulatory requirements. In situations where one regulatory agency has statutory responsibility
for the oversight of the establishment but contracts inspections out to a separate regulatory authority, the
data collector is to enter the name of the regulatory jurisdiction whose Food Code or ordinance is being
applied as the standard for assessment of that establishment’s operation.
 Enrolled in FDA Retail Food Program Standards: The data collector will select either YES or NO using
the following criteria:
 YES – FDA is in receipt of a Program Standards National Registry Report and Permission to Publish
confirming the jurisdiction’s enrollment.
 NO – FDA is not in receipt of a Program Standards National Registry Report and Permission to Publish
that confirms the jurisdiction’s enrollment.
NOTE – If FDA is not in receipt of a Program Standards National Registry Report and Permission to Publish
that confirms the jurisdiction’s enrollment, the data collector does not complete the Jurisdiction Meets
Standard 1 section of the data collection form.
 Jurisdiction Meets Standard 1: The data collector will select one of the following responses based on the
criteria provided below:
 YES - Self-Reported – FDA is in receipt of a Program Standards National Registry Report and
Permission to Publish confirming that the jurisdiction has self-reported meeting Standard 1. A Program
Standard verification audit has not been conducted to confirm the self-assessment findings.
 YES - Verified by Audit – FDA is in receipt of a Program Standards National Registry Report and
Permission to Publish confirming that the jurisdiction has had a Program Standards verification audit
confirming that it meets Standard 1.
 NO – The jurisdiction has not reported meeting Standard 1

 Jurisdiction Uses a Grading System:
Jurisdiction Uses a Grading System (Select ONE of the following):
YES – Numerical Score
YES – Letter Grade
YES – Color Graphic
YES – Numerical Score and Letter Grade
YES – Numerical Score and Color Graphic
YES – Letter Grade and Color Graphic
YES – Numerical Score, Letter Grade, and Color Graphic
YES – Other
NO – Jurisdiction does not have a grading system
If “Other” describe:

The data collector will determine whether or not the jurisdiction incorporates a grading system as part of its
retail food inspection program. If the jurisdiction uses a grading system, the data collector will identify which
of the following types of systems the jurisdiction has in place. Some jurisdiction may implement a combination
of these grading systems:
 Letter Grade: The jurisdiction’s grading system is based on the use of alphabetical letters, (For
example: A, B, C), that define levels of food safety compliance with regulatory standards
 Numerical Score: The jurisdiction’s grading system is based on a numerical value that correlates to
a specific level of food safety compliance with regulatory standards
 Color Graphic: The jurisdiction’s grading system is based on a color system, for example – green,
yellow, red, that define levels of food safety compliance with regulatory standards
 Other: The jurisdiction uses a different grading system than described above. NOTE: If the
“Other” response is selected the data collector must describe the grading system in the data entry
field – If “Other” describe.
From the information received by the jurisdiction, the data collector will select the response from the following
list of options that most accurately describes the jurisdiction’s use of a grading system. Only one response
selection is to be made.










YES – Numerical Score
YES – Letter Grade
YES – Color Graphic
YES – Numerical Score and Letter Grade
YES – Numerical Score and Color Graphic
YES – Letter Grade and Color Graphic
YES – Numerical Score, Letter Grade, and Color Graphic
YES – Other
NO – Jurisdiction does not have a grading system

 Jurisdiction’s program includes public reporting of inspection results

This information field describes the method the jurisdiction uses to communicate inspection results to the
public. Some jurisdictions may implement a combination of these reporting systems:
 Posting on site: Inspection reports or grading system status is required by the regulatory authority to be
posted within the establishment.
 Posting on the Internet: Inspection reports or grading system status is made available via posting on a
dedicated internet web site by the regulatory authority.
 Other: The regulatory authority uses an alternative method besides requiring the establishment to post
inspection results on-site or posting to the internet.
NOTE – This element does not require the data collector to determine the establishment’s compliance with the
regulatory authority’s requirement for reporting inspection results.
From the information received by the jurisdiction, the data collector will select the response from the following
list of options that most accurately describes the jurisdiction’s system for publically reporting inspection results.
Only one response selection is to be made.






YES – Posting on-site
YES – Posting on the Internet
YES – Posting on-site and Posting on the Internet
YES – Other
NO – Jurisdiction does not require inspection results to be reported (Other than through the Freedom of
Information Act.

NOTE: If the “Other” response is selected the data collector must describe the type of grading system used by
the jurisdiction with regulatory authority in the data entry field – IF “Other” describe.
 Jurisdiction Has a Mandatory Food Protection Manager Certification Requirement
Jurisdiction Has a Mandatory Food Protection Manager Certification Requirement (Select ONE of the
following):
YES – Based ONLY on successful completion of an ANSI Accredited Program
YES – Other Food Protection Manager Certification Program (not an ANSI-Accredited Program)
YES – Other AND Reciprocal Acceptance of an ANSI Accredited Program
NO – Jurisdiction does not have a mandatory Food Protection Manager Certification Requirement
If “Other” describe:

This data field provides information as to whether the regulatory authority has a Food Protection Manager
Certification requirement included as part of their regulatory foundation. Regulatory foundation includes any
statute, regulation, rule, ordinance, or other prevailing set of regulatory requirements that governs the operation
of a restaurant food establishment. The jurisdiction’s mandatory requirement may contain language specific to
one or more of the following types of food protection manager certification programs:
 YES – Based ONLY on successful completion of an ANSI Accredited Program – The jurisdiction’s
regulatory foundation includes a Food Protection Manager Certification requirement that is based solely
on successful completion of an examination administered by an ANSI accredited food protection
manager certification program.
 YES – Other Food Protection Manager Certification (not an ANSI Accredited Program) – The
jurisdiction’s regulatory foundation does include a Food Protection Manager Certification requirement
that is based on certification program that is not ANSI accredited. In many cases, these are food
protection manager certification programs that have been developed and administered by State, local, or
tribal regulatory authorities. These may also include State developed food protection manager
certification programs that are required by local agencies as part of the regulatory foundation. The
jurisdiction does not accept successful completion of an ANSI Accredited food protection manager
certification program as meeting the intent of their mandatory requirement.
 YES – Other AND Reciprocal Acceptance of an ANSI Accredited Program – The jurisdiction’s
regulatory foundation does include a Food Protection Manager Certification requirement that is based on
certification program that is not ANSI accredited. In many cases, these are food protection manager
certification programs that have been developed and administered by State, local, or tribal regulatory
authorities. These may also include State developed food protection manager certification programs that
are required by local agencies as part of the regulatory foundation. The jurisdiction does, however,
accept successful completion of an ANSI Accredited food protection manager certification program as
meeting the intent of their mandatory requirement.
 NO – Jurisdiction does not have a mandatory food protection manager certification requirement –
The jurisdiction’s regulatory foundation does not include a mandatory food protection manager
certification requirement.
From the information received by the jurisdiction, the data collector will select the response from the following
list of options that most accurately describes the jurisdiction’s regulatory requirement for food protection
manager certification. Only one response selection is to be made.
 YES – Based ONLY on successful completion of an ANSI Accredited Program
 YES – Other Food Protection Manager Certification (not an ANSI Accredited Program)
 YES – Other AND Reciprocal Acceptance of an ANSI Accredited Program
 NO – Jurisdiction does not have a mandatory food protection manager certification requirement
 Food Protection Manager Certification Program Elements
If “Other” (Select ONE of the following)
Other includes a required Training Component
Other includes a Test other than exams offered through an ANSI Accredited Programs
Other includes a required Training Component AND Test other than exam offered through an ANSI
Accredited Program

If the data collector selects a response that contains “Other” indicating that the jurisdiction’s regulatory
foundation includes a Food Protection Manager Certification requirement that is based on certification program
36

that is not ANSI accredited, they are to complete this data collection field to describe the elements of the
program. The data collector will select one of the following responses that best describes the elements that
comprise the jurisdiction’s food protection manager certification program.
 Other includes a required Training Component – The jurisdiction’s regulatory foundation requires the
Food Protection Manager Certification Program to incorporate a training component. NOTE: This
information field does not attempt to quantify the delivery method for the training, such as web-based
vs. classroom, nor does it attempt to determine the required number of training hours. In many cases,
the training component will be a requirement the jurisdiction has implemented as a pre-requisite for
taking the food protection manager certification examination offered through an ANSI accredited
program or one developed by the regulatory authority.
 Other includes a Test other than exams offered through an ANSI Accredited Program – The
jurisdiction’s regulatory foundation requires the Food Protection Manager Certification Program to
incorporate a test component. The required test is one developed by the regulatory authority or some
other entity that is not an ANSI accredited program. NOTE: This information field does not attempt to
determine whether the test was developed or administered in accordance with sound psychometric best
practices.
 Other includes a required Training Component AND Test other than exam offered through an ANSIAccredited Program – The regulatory authority administers a certification program that has a required
training component and test other than an exam offered through an ANSI Accredited Program. If the
regulatory authority accepts certification from ANSI-Accredited programs but also administers their
own program or accepts others, the data collector is to mark this information field YES and select the
“Other” option to describe the combination of certification processes recognized by the regulatory
authority.
 Other – The data collector must select this option when the regulatory authority recognizes a
certification program that is not ANSI-accredited. If the “Other” response is selected the data collector
must describe the type of Food Protection Manager Certification programs recognized by the regulatory
authority in the data entry field provided – If “Other” describe.
From the information received by the jurisdiction, the data collector will select the response from the following
list of options that most accurately describes the program elements that comprise the jurisdiction’s regulatory
requirement for food protection manager certification. Only one response selection is to be made.
 YES – Based ONLY on successful completion of an ANSI Accredited Program
 YES – Other Food Protection Manager Certification (not an ANSI Accredited Program)
 YES – Other AND Reciprocal Acceptance of an ANSI Accredited Program
 NO – Jurisdiction does not have a mandatory food protection manager certification requirement
 Scope of Food Protection Manager Certification Requirement
Scope of Food Protection Manager Certification Requirement (Select ONE of the following):
Person in Charge – One Per Establishment
Person in Charge – Present at All Times
Supervisory Employee – One Per Establishment
Supervisory Employee – Present at All Times
Other
If “Other” describe:

The data collector will confirm with the regulatory authority, who within the food establishment must obtain a
Food Protection Manager Certification based on the language contained in the jurisdiction’s regulatory
foundation. The data collector will select one of the following responses that best describes the scope of the
jurisdiction’s food protection manager certification requirement:
 Person-in-Charge – One Per Establishment – The person in charge is an employee that has supervisory
and management responsibility and the authority to direct and control food preparation and service. The
jurisdiction’s regulatory language requires the person in charge to obtain Food Protection Manager
Certification. NOTE: The data collector simply has to determine if the language in the jurisdiction’s
regulatory foundation incorporates the term “Person-in-Charge” and is specific to having one per
establishment. The data collector does not have to determine whether the definition of “Person-inCharge” is consistent with the 2013 Food Code.
 Person-in-Charge – Present at All Times – An employee that has supervisory and management
responsibility and the authority to direct and control food preparation and service is required to obtain
Food Protection Manager Certification. NOTE: The data collector determines if the language in the
jurisdiction’s regulatory foundation incorporates the term “Person-in-Charge” and is specific to having a
person in charge who is a certified food protection manager present at all time of operation.
 Supervisory Employee – One Per Establishment – The data collector determines if the language in the
jurisdiction’s regulatory foundation is consistent with Section 2-102.12, Certified Food Protection
Manager, to require that at least one food establishment employee with management and supervisory
responsibility be a Certified Food Protection Manager (CFPM). NOTE: The data collector
determines whether the regulatory language is consistent with Section 2-102.12 of the 2013 Food Code.
 Supervisory Employee – Present at all Times – The data collector determines if the language in the
jurisdiction’s regulatory foundation is consistent with Section 2-102.12 Certified Food Protection
Manager of the 2013 Food Code. In addition, the regulatory jurisdiction requires that a certified food
protection manager be present during all times of operation.
 Other – The scope of the jurisdiction Food Protection Manager Certification requirement is different
from the four response options provided above. NOTE: If the “Other” response is selected the data
collector must describe the scope of the Food Protection Manager Certification regulation in the data
entry field – IF “Other” describe.
From the information received by the jurisdiction, the data collector will select the response from the following
list of options that most accurately describes the scope of the jurisdiction’s regulatory requirement for food
protection manager certification. Only one response selection is to be made.
 Person in Charge – One Per Establishment
 Person in Charge – Present at All Times
 Supervisory Employee – One Per Establishment
 Supervisory Employee – Present at All Time
 Other

 Jurisdiction Requires Food Handler Card:
Jurisdiction Requires Food Handler Card (Select ONE of the following):
YES – Required Training
YES – Required Test
YES – Required Training and Test
YES – Other
NO – Jurisdiction does NOT require Food Handler Cards
If “Other” describe:

This data field provides information as to whether the regulatory authority requires food workers to obtain food
handler cards that are usually based on successful completion of some type of training / testing requirement.
This information field represents the regulatory authority’s requirement for food employees. The Food Handler
Card is not Food Protection Manager Certification. A Food Handler Card represents a level of food safety
knowledge for non-managers who prepare or serve food. The jurisdiction’s mandatory food handler card
requirement may contain language specific to one or more of the following types of programs:
 YES - Required Training – Food employees must attend classroom or web-based training that addresses
food safety principles and procedures. The training can be conducted by the regulatory authority or their
designated agent. Passing an examination or test is not required for obtaining the Food Handler Card.
NOTE: This element makes no attempt to evaluate the curriculum or assess length of the classroom
training required by the regulatory authority. However, if the jurisdiction simply distributes a booklet to
food handlers to read prior to taking a test, this is not to be considered a training program.
 YES – Required Test – Food employees must successfully complete an examination or test administered
by the regulatory authority or their designated agent. Participation in a training course is not a prerequisite for obtaining the Food Handler Card. NOTE: This element makes no attempt to evaluate the
knowledge domains covered in the exam or the test development process used by the regulatory
authority.
 YES - Required Training and Test – Food employees must attend classroom or web-based training that
addresses food safety principles and procedures. The training can be conducted by the regulatory
authority or their designated agent. Passing an examination or test is a requirement for obtaining the
Food Handler Card.
 Other – The regulatory authority requires food handler cards based on an alternative approach to
training and/or testing or a combination of both. NOTE: If the “Other” response is selected the data
collector must describe the Food Handler Card program in the data entry field – If “Other” describe
 NO – Jurisdiction does NOT require Food Handler Cards – The data collector will select this response
when the jurisdiction’s regulatory foundation does NOT include a requirement for food workers to
obtain food handler cards.
NOTE: The data collector does not have to verify the establishment’s compliance with the regulatory
authority’s Food Handler Card requirement.
From the information received by the jurisdiction, the data collector will select the response from the following
list of options that most accurately describes the jurisdiction’s food handler card requirement. Only one
response selection is to be made.
 YES – Required Training
 YES – Required Test
39





YES – Required Training and Test
YES - Other
NO – Jurisdiction does NOT require Food Handler Cards

 Dates of the Two Most Recent Regulatory Routine Inspections:
Dates of the Two Most Recent Regulatory Routine Inspections:

Date 1:

Date 2:

A routine inspection is a standard inspection conducted at pre-determined regular intervals set by the regulatory
authority. A routine inspection is not a re-inspection, compliance follow-up inspection, complaint inspection,
outbreak investigation, risk assessment review, process review, or a variance review. The data collector will
enter the dates of the two most recent inspections using the following criteria:
 Date 1: Represents the date of the most recent routine inspection conducted prior to the data collection.
NOTE – FDA prefers that regulatory authorities not conduct routine inspection during data collections, but if
one is conducted it is not to be entered as the most recent inspection. The regulatory authority’s most recent
inspection must occur prior to the data collection visit.
 Date 2: Represents the date of the second most recent inspection conducted prior to the data collection.
NOTE – The data collector may have a randomly selected establishment that has not been in business long
enough to have had two routine inspections conducted. If less than two inspections have been conducted at the
facility, enter “NA” in the appropriate date field. If only one routine inspection has been conducted enter it as
the most recent inspection and enter “NA” in the Date 2 field.

III. MANAGER CERTIFICATION
This section will review the marking instructions for the data collection to assess the status of manager
certification for an establishment. Though the manager certification data collection fields for restaurants,
healthcare facilities, and schools are exactly the same, the approach for retail food stores is slightly different.
Part A of this section will focus on the manager certification data collection for restaurants, health care, and
school facilities. Part B will provide an overview of the manager certification data collection for retail food
stores.

A. Manager Certification – Restaurants; Healthcare Facilities; and Schools
 1. Is there a certified food protection manager EMPLOYED at the establishment?
MANAGER CERTIFICATION
1. Is there a certified food protection manager EMPLOYED at the establishment (Select ONE)?
YES – Certificate Available
YES – Certificate NOT Available
NO – No certified food protection managers are employed at the establishment
If the marking above contains a “YES” response, indicate the Type of Certification below (Select ONE)
ANSI-Accredited
Other
Unsure

The data collector will determine whether a certified food protection manager is employed at the establishment.
The employee that is a certified food protection manager does not have to be present at the time of the data
collection. The data collector will select one of the following three responses that best reflects the information
obtain during the data collection:
 YES Certificate Available – indicates that a certified food protection manager is employed by the
selected establishment. The certified food protection manager may or may not be present at the
establishment during the data collection. There must be a copy of a current certificate from the
certification program provider on site during the data collection to mark this option.
 YES Certificate NOT Available – indicates that a certified food protection manager is employed at the
selected establishment. The certified food protection manager may or may not be present at the
establishment during the data collection. A current certificate from the certification program provider is
NOT available on site during the data collection to verify the YES response.
 NO – The person-in-charge indicates that there are no certified food protection managers or is uncertain
as to whether a certified food protection manager is employed at the food establishment. NOTE: The
data collector is to mark this option if the certificate / certification for the identified employee has
exceeded the expiration date for renewal.
If the data collector selects a response that contains “YES” indicating that a certified food protection manager is
employed at the selected establishment, information is to be obtained as to the food protection manager
certification organization that issued the certificate. This information may be obtained from the certificate or be
based on verbal information provided during the data collection. The data collector will select one of the
41

following responses that best describes the food protection manager certification organization that issued the
certificate:
 ANSI-Accredited – The data collector will select this option if the certificate provided is from a food
protection manager certification organization that is accredited by the American National Standards
Institute (ANSI). At the start of the FY’16 restaurant data collection, the following four food protection
manager certification program had received ANSI accreditation:
● 360 Training
● Environmental Health Testing, LLC (National Registry of Food Safety Professionals)
● National Restaurant Association (ServSafe Food Protection Manager Certification Program)
● Prometric, Inc.
 Other – The data collector will select this option if the certificate provided is from a food protection
manager certification organization that is not accredited by the American National Standards Institute.
This may occur when a State or local regulatory agency administers its own food protection manager
certification program and issues a certificate upon the candidate’s successful completion of the program.
 Unsure – The data collector will select this option if information is obtained that a certified food
protection manager is employed at the establishment but no certificate is available and the person in
charge or food employee is unsure which food protection manager certification program they attended.
 2. Is there an employee who is a certified food protection manager PRESENT during the data
collection?
2. Is there an employee who is a certified food protection manager PRESENT during the data collection
(Select ONE)?
YES – Certificate Available
YES – Certificate NOT Available
NO – No certified food protection managers are present during the data collection
If the marking above contains a “YES” response, indicate the Type of Certification below (Select ONE)
ANSI-Accredited
Other
Unsure

The data collector will determine whether a certified food protection manager is present at the establishment
during the data collection. NOTE: The certified food protection manager can be any employee that is present
during the data collection and does not have to be the person in charge. The data collector will select one of the
following three responses that best reflects the information obtain during the data collection:
 YES Certificate Available – indicates that a certified food protection manager is present at the
establishment during the data collection. There must be a copy of a current certificate from the
certification program provider on site during the data collection.
 YES Certificate NOT Available – indicates that a certified food protection manager is present at the
selected establishment during the data collection. A current certificate from the certification program
provider is not available on site during the data collection to verify the YES response.
 NO – A certified food protection manager is not present at the establishment during the data collection.
NOTE: The data collector is to mark this option if the certificate / certification for the individual
present at the time of the data collection has exceeded the expiration date for renewal.
If the data collector selects a response that contains “YES” indicating that a certified food protection manager is
present at the selected establishment during the data collection, information is to be obtained as to the food
42

protection manager certification organization that issued the certificate. This information may be obtained from
the certificate OR be based on verbal information provided during the data collection. The data collector will
select one of the following responses that best describes the food protection manager certification organization
that issued the certificate:


The data collector will determine whether the person in charge at the time of the data collection is a certified
food protection manager. NOTE: The person in charge means the individual present at the food establishment
who is responsible for the operation at the time of the data collection. The data collector will select ONE of the
following three responses that best reflects the information obtain during the data collection:
 YES Certificate Available – indicates that the person in charge at the time of the data collection is a
certified food protection manager. There must be a copy of a current certificate from the certification
program provider on site during the data collection.
 YES Certificate NOT Available – indicates that the person in charge at the time of the data collection is
a certified food protection manager. A current certificate from the certification program provider is not
available on site during the data collection to verify the YES response.
 NO – The person in charge at the time of the data collection is not a certified food protection manager.
NOTE: The data collector is to mark this option if the certificate / certification for the person in charge
has exceeded the expiration date for renewal.
43

If the data collector selects a response that contains “YES” indicating that the person in charge at the time of the
data collection is a certified food protection manager, information is to be obtained as to the food protection
manager certification organization that issued the certificate. This information may be obtained from the
certificate OR be based on verbal information provided during the data collection. The data collector will select
one of the following responses that best describes the food protection manager certification organization that
issued the certificate:


YES

The data collector will select either YES or NO using the following criteria:
 YES – indicates that the selected establishment has a policy that requires a certified food protection
manager to be present at all times. NOTE: This is the establishment’s policy and is not to be confused
with the regulatory jurisdiction’s requirement. The policy does not have to be written. The data
collector can use the information provided by the person in charge to complete this element.
 NO – indicates that the selected establishment does not have a policy that requires a certified food
protection manager to be present at all times.

B. Manager Certification – Retail Food Stores
The manager certification data collection for retail food stores is conducted slightly different than for the other
facility types. The retail food store data collection form contains two additional questions that attempt to
distinguish between certification of a store level manager and certification of a manager assigned to one of the
departments /operations (deli, seafood. or produce) within the retail food store.

Manager Certification – Store Level Manager
The first two questions in the manager certification section for retail food stores focuses on the store level
manager.
MANAGER CERTIFICATION – STORE LEVEL MANAGER
1. Is the PERSON IN CHARGE of the retail food store at the time of the data collection a certified food
protection manager (Select ONE)?
YES – Certificate Available
YES – Certificate NOT Available
NO – The person in charge at the time of the data collection is NOT a certified food protection manager
If the marking above contains a “YES” response, indicate the Type of Certification below (Select ONE)
ANSI-Accredited
Other
Unsure
2. Is the PERSON IN CHARGE of the retail food store the same as the PERSON IN CHARGE of the
department / operation where the data collection was conducted?
YES
NO

 1. Is the PERSON IN CHARGE of the retail food store at the time of the data collection a certified
food protection manager?
The data collector will determine whether the person in charge of the retail food store operation at the time of
the data collection is a certified food protection manager. NOTE: For this question, the person in charge
means the individual present who is a store level manager responsible for the retail store operation at the time of
the data collection. The data collector will select one of the following three responses that best reflects the
information obtain during the data collection:
 YES Certificate Available – indicates that the person in charge at the time of the data collection who is
responsible for the operation of the retail food store is a certified food protection manager. There must
be a copy of a current certificate from the certification program provider on site during the data
collection.
 YES Certificate NOT Available – indicates that the person in charge at the time of the data collection
who is responsible for the operation of the retail food store is a certified food protection. A current
certificate from the certification program provider is not available on site during the data collection to
verify the YES response.
 NO – The person in charge at the time of the data collection who is responsible for the operation of the
retail food store is not a certified food protection manager. NOTE: The data collector is to mark this
option if the certificate / certification for the person in charge has exceeded the expiration date for
renewal.
If the data collector selects a response that contains “YES” indicating that the person in charge at the time of the
data collection who is responsible for the operation of the retail food store is a certified food protection
manager, information is to be obtained as to the food protection manager certification organization that issued
the certificate. This information may be obtained from the certificate OR be based on verbal information
45

provided during the data collection. The data collector will select one of the following responses that best
describes the food protection manager certification organization that issued the certificate:


ANSI-Accredited – The data collector will select this option if the certificate provided is from a food
protection manager certification organization that is accredited by the American National Standards
Institute. At the start of the FY’16 restaurant data collection, the following four food protection
manager certification programs had received ANSI accreditation:
● 360 Training.com, Inc.,
● National Registry of Food Safety Professionals
● National Restaurant Association
● Prometric, Inc.
 Other – The data collector will select this option if the certificate provided is from a food protection
manager certification organization that is not accredited by the American National Standards Institute.
This may occur when a State or local regulatory agency administers its own food protection manager
certification program and issues a certificate upon the candidate’s successful completion of the program.
 Unsure – The data collector will select this option if information is obtained that a certified food
protection manager is employed at the establishment but no certificate is available and the person in
charge or food employee is unsure which food protection manager certification program they attended.
 2. Is the PERSON IN CHARGE of the retail food store the same as the PERSON IN CHARGE of the
department / operation where the data collection was conducted?
 YES – indicates that the person in charge at the time of the data collection who is responsible for the
operation of the retail food store is also the person in charge of the department / operation (deli; seafood;
or produce) where the data collection is conducted.
 NO – indicates that the person in charge of the department / operation (deli, seafood, or produce)
selected for the data collection is a different person than the individual who is the person in charge of the
retail food store operation.
Manager Certification for the Retail Food Store Department / Operation
The marking instructions for the four questions pertaining to assessing manager certification within the selected
retail food store department / operation (deli; seafood; or produce) are the same as those provided on pages 2427 for the restaurant, health care, and school facility types. For the four questions listed under the header,
“Manager Certification for the Retail Food Store Department / Operation”, the data collector should view the
selected department / operation (deli; seafood; or produce) as a stand-alone establishment.

MANAGER CERTIFICATION FOR THE RETAIL FOOD STORE DEPARTMENT / OPERATION
1. Is there a certified food protection manager EMPLOYED at the department / operation (Select ONE)?
YES – Certificate Available
YES – Certificate NOT Available
NO – No certified food protection managers are employed at the establishment
If the marking above contains a “YES” response, indicate the Type of Certification below (Select ONE)
ANSI-Accredited
Other
Unsure
2. Is there an employee who is a certified food protection manager PRESENT at the department / operation
during the data collection (Select ONE)?
YES – Certificate Available
YES – Certificate NOT Available
NO – No certified food protection managers are present during the data collection
If the marking above contains a “YES” response, indicate the Type of Certification below (Select ONE)
ANSI-Accredited
Other
Unsure
3. Is the PERSON IN CHARGE at the time of the data collection of the department / operation a certified
food protection manager (Select ONE)?
YES – Certificate Available
YES – Certificate NOT Available
NO – The person in charge at the time of the data collection is NOT a certified food protection manager
If the marking above contains a “YES” response, indicate the Type of Certification below (Select ONE)
ANSI-Accredited
Other
Unsure
4. Is the department’s / operation’s policy to have a certified food protection manager present at all times?
YES
NO
If “Other” for one or more of the responses to questions 1 – 3, describe:

This page intentionally left blank.

IV.

EMPLOYEE HEALTH POLICY

 1. Food employees exhibiting certain illness symptoms or conditions that require exclusion or
restriction in the Food Code ARE OBSERVED within the establishment during the data collection.

The data collector will select either YES or NO using the following criteria:
 YES – During the data collection, observations indicate the presence of food employees that have illness
symptoms or conditions requiring exclusion or restriction as described in Chapter 2 of the Food Code.
 NO – During the data collection, observations indicate there are NO food employees present that have
illness symptoms or conditions requiring exclusion or restriction as described in Chapter 2 of the Food
Code.
 2. Are food employees and conditional employees informed of their responsibility to report to the
person in charge illness symptoms as specified in Section 201.11 of the Food Code?

The data collector will determine whether an employee health policy is in place that addresses the responsibility
of food employees to report illness symptoms to the person in charge. The data collector will select ONE of the
following responses that best describes the establishment’s employee health policy as it relates to food
employees reporting illness symptoms.
 YES – Policy is ORAL and based on the current version of the FDA Food Code – The data collector
will select this option if the food establishment has an employee health policy based on the current
version of the FDA Food Code that covers the responsibility of food employees to report illness
symptoms to the person in charge and the policy is primarily communicated verbally with little or no
written documentation. The person in charge satisfactorily demonstrates during the data collection, that
all food employees and conditional employees are informed of their responsibility to report to
management information about their health and activities as they relate to illness symptoms including
vomiting, diarrhea, jaundice, sore throat with fever or lesion containing pus or infected wound that is
open and draining (unprotected), as specified in Subparagraph 2-201.11(A)(1) of the Food Code. In lieu
of written documentation, the data collector is to randomly select ONE food employee (other than the
person in charge) and confirm whether management has provided information as to their responsibility
to report illness symptoms to the person in charge.
49

 YES – Policy is WRITTEN and based on the current version of the FDA Food Code – The data
collector will select this option if the food establishment has an employee health policy based on the
current version of the FDA Food Code that covers the responsibility of food employees to report illness
symptoms to the person in charge and the policy is primarily in written form. The person in charge
provides documentation or otherwise satisfactorily demonstrates during the data collection, that all food
employees and conditional employees are informed of their responsibility to report to management
information about their health and activities as they relate to illness symptoms including vomiting,
diarrhea, jaundice, sore throat with fever or lesion containing pus or infected wound that is open and
draining (unprotected), as specified in Subparagraph 2-201.11(A)(1) of the Food Code. Satisfactory
compliance may be demonstrated by management when documentation indicates that all food
employees are required to complete and sign Form 1-B contained in FDA’s Employee Health and
Hygiene Handbook; OR there is a documented training program based on all the information contained
in Form 1-B; OR the establishment uses a combination of training, signs, pocket cards, or other methods
to convey the information in Form 1-B.
 NO – Policy only partially developed or non-existent – The person-in-charge does NOT provide
documentation or otherwise satisfactorily demonstrate that all food employees and conditional
employees are informed of their responsibility to report to management information about their health
and activities as they relate to illness symptoms as specified in Subparagraph 2-201.11(A)(1) of the
Food Code, OR the selected food employee is NOT able to confirm that management has provided
information as to their responsibility to report illness symptoms to the person in charge.
 3. Are food employees and conditional employees informed of their responsibility to report to the
person in charge diagnosis with, or exposure to, the specific ILLNESSES specified in Section 201.11
of the Food Code?

The data collector will determine whether an employee health policy is in place that addresses the responsibility
of food employees to report diagnosis with, or exposure to, specific illnesses specified in Section 2-201.11 of
the Food Code to the person in charge. The data collector will select ONE of the following responses that best
describes the establishment’s employee health policy as it relates to diagnosis with, or exposure to, the specific
illnesses.
 YES – Policy is ORAL and based on the current version of the FDA Food Code – The data collector
will select this option if the food establishment has an employee health policy based on the current
version of the FDA Food Code that covers the responsibility of food employees to report diagnosis with,
or exposure to, the specific illnesses specified in Section 2-201.11 of the Food Code to the person in
charge and the policy is primarily communicated verbally with little or no written documentation. The
person in charge satisfactorily demonstrates during the data collection, that all food employees and
conditional employees are informed of their responsibility to report to management information about
their health and activities as they relate to diagnosis with, or exposure to, specific illnesses including,
Norovirus, Hepatitis A virus, Shigella spp., Shiga Toxin-Producing Escherichia coli, or Salmonella
Typhi, or non-typhoidal Salmonella as specified in Subparagraph 2-201.11(A)(2) of the Food Code. In
lieu of written documentation, the data collector is to randomly select ONE food employee (other than
50

the person in charge) and confirm whether management has provided information as to their
responsibility to report specific illnesses to the person in charge.
 YES – Policy is WRITTEN and based on the current version of the FDA Food Code – The data
collector will select this option if the food establishment has an employee health policy based on the
current version of the FDA Food Code that covers the responsibility of food employees to report
diagnosis with, or exposure to, the specific illnesses specified in Section 2-201.11 of the Food Code to
the person in charge and the policy is primarily in written form. The person in charge provides
documentation or otherwise satisfactorily demonstrates during the data collection, that all food
employees and conditional employees are informed of their responsibility to report to management
information about their health and activities as they relate to diagnosis with, or exposure to, specific
illnesses including, Norovirus, Hepatitis A virus, Shigella spp., Shiga Toxin-Producing Escherichia coli,
or Salmonella Typhi, or non-typhoidal Salmonella, as specified in Subparagraph 2-201.11(A)(2) of the
Food Code. Satisfactory compliance may be demonstrated by management when documentation
indicates that all food employees are required to complete and sign Form 1-B contained in FDA’s
Employee Health and Hygiene Handbook; OR there is a documented training program based on all the
information contained in Form 1-B; OR the establishment uses a combination of training, signs, pocket
cards, or other methods to convey the information in Form 1-B.
 NO – Policy only partially developed or non-existent – The person-in-charge does NOT provide
documentation or otherwise satisfactorily demonstrate during the data collection, that all food
employees and conditional employees are informed of their responsibility to report to management
information about their health and activities as they relate to illness diagnosis with, or exposure to,
specific illnesses as specified in Subparagraph 2-201.11(A)(2) of the Food Code, OR the selected food
employee is NOT able to confirm that management has provided information as to their responsibility to
report specific illnesses to the person in charge.
 4. Is management aware of its responsibility to NOTIFY THE REGULATORY AUTHORITY when
a food employee is jaundice or diagnosed with an illness due to a pathogen specified in Section 2201.11 of the Food Code?

The data collector will determine whether an employee health policy is in place that addresses management’s
responsibility to notify the regulatory authority when a food employee is jaundiced or diagnosed with an illness
due to a pathogen specified in the Food Code. The data collector will select ONE of the following responses
that best describes the establishment’s employee health policy as it relates to management’s responsibility to
notify the regulatory authority.
 YES – Policy is ORAL and based on the current version of the FDA Food Code – The data collector
will select this option if the food establishment has an employee health policy based on the current
version of the FDA Food Code that covers the responsibility of the person in charge to notify the
regulatory authority when a food employee is jaundice or diagnosed with an illness due to a pathogen
specified in Section 2-201.11 of the Food Code and the policy is primarily communicated orally.
 YES – Policy is WRITTEN and based on the current version of the FDA Food Code – The data
collector will select this option if the food establishment has an employee health policy based on the
51

current version of the FDA Food Code that covers the responsibility of the person in charge to notify the
regulatory authority when a food employee is jaundice or diagnosed with an illness due to a pathogen
specified in Section 2-201.11 of the Food Code and the policy is primarily in written form
 NO – Policy only partially developed or non-existent – The person-in-charge is NOT aware of their
responsibility to notify the regulatory authority when a food employee is jaundice or diagnosed with an
illness due to a pathogen specified in Section 2-201.11 of the Food Code.
 5. Is the management’s employee health policy consistent with Section 2-201.12 of the Food Code for
EXCLUDING AND RESTRICTING food employees and conditional employees on the basis of their
health and activities as they relate to diseases that are transmitted through foods?

The data collector ill determine whether an employee health policy is in place that addresses exclusion and
restriction of food employees on the basis of their health and activities as they relate to diseases that transmitted
through foods. The data collector will select ONE of the following responses that best describes the
establishment’s employee health policy as it relates to exclusion and restriction of food employees on the basis
of their health and activities related to diseases transmitted through foods.
 YES – Policy is ORAL and based on the current version of the FDA Food Code – The data collector
will select this option if the food establishment has an employee health policy based on the current
version of the FDA Food Code that covers exclusion and restriction of food employees on the basis of
their health activities as they relate to diseases that are transmitted through foods and the policy is
primarily communicated verbally. The person in charge is able to demonstrate implementation of
employee health exclusion and restriction policy consistent with Tables 1a, 1b, 2, 3, and 4 contained in
the FDA Employee Health and Personal Hygiene Handbook. NOTE: Non-typhoidal Salmonella had
not been included in the handbook when this guidance was developed. Reference the Section 2-201.12
of the 2013 Food Code. In lieu of written documentation, the person-in-charge can state their exclusion
/ restriction policy that addresses each of the illnesses identified in Subparagraph 2-201.11(A)(2) of the
Food Code and can associate the required exclusion / restriction criteria contained in Section 201.12 of
the Food Code for each of the illnesses. NOTE: It is acceptable for the establishment’s employee
health policy to be more stringent than the current version of the Food Code.
 YES – Policy is WRITTEN and based on the current version of the FDA Food Code – The data
collector will select this option if the food establishment has an employee health policy based on the
current version of the FDA Food Code that covers exclusion and restriction of food employees on the
basis of their health activities as they relate to diseases that are transmitted through foods and the policy
is primarily in written form. The person in charge is able to demonstrate implementation of employee
health exclusion and restriction policy consistent with Tables 1a, 1b, 2, 3, and 4 contained in the FDA
Employee Health and Personal Hygiene Handbook. NOTE: Non-typhoidal Salmonella had not been
included in the handbook when this guidance was developed. Reference the Section 2-201.12 of the
2013 Food Code. Satisfactory compliance may be demonstrated when the person in charge has
available and references the FDA Employee Health and Person Hygiene Handbook and tables as their
exclusion / restriction policy or produces similar written documents consistent with the exclusion /
52

restriction requirements contained in the handbook and tables. NOTE: It is acceptable for the
establishment’s employee health policy to be more stringent than the current version of the Food Code.
 NO – Policy only partially developed or non-existent – The person-in-charge does NOT provide
documentation or otherwise satisfactorily demonstrate during the data collection, that all food
employees and conditional employees are excluded or restricted as per Section 2-201.12 of the Food
Code.
 6. Is the management’s employee health policy consistent with Section 2-201.13 of the Food Code for
removal of exclusions and restrictions of food employees and conditional employees on the basis of
their health and activities as they relate to diseases that are transmitted through foods?

The data collector will determine whether an employee health policy is in place that addresses removal of
exclusions and restrictions of food employees on the basis of their health and activities as they relate to diseases
that transmitted through foods. The data collector will select ONE of the following responses that best
describes the establishment’s employee health policy as it relates to the removal of exclusions and restrictions
of food employees on the basis of their health and activities related to diseases transmitted through foods.
 YES – Policy is ORAL and based on the current version of the FDA Food Code – The data collector
will select this option if the food establishment has an employee health policy based on the current
version of the FDA Food Code that covers the removal of exclusions and restrictions of food employees
on the basis of their health activities as they relate to diseases that are transmitted through foods and the
policy is primarily communicated verbally. The person in charge is able to demonstrate a policy for
removal of employee health exclusions and restrictions that is consistent with Tables 1a, 1b, 2, 3, and 4
contained in the FDA Employee Health and Personal Hygiene Handbook. NOTE: Non-typhoidal
Salmonella had not been included in the handbook when this guidance was developed. Reference the
Section 2-201.12 of the 2013 Food Code. In lieu of written documentation, the person in charge can
state their exclusion / restriction removal policy that addresses each of the illnesses identified in
Subparagraph 2-201.11(A)(2) of the Food Code and can associate the required exclusion / restriction
removal criteria contained in Section 2-201.12 of the Food Code for each of the illnesses. NOTE: It is
acceptable for the establishment’s employee health policy to be more stringent than the current version
of the Food Code.
 YES – Policy is WRITTEN and based on the current version of the FDA Food Code – The data
collector will select this option if the food establishment has an employee health policy based on the
current version of the FDA Food Code that covers removal of exclusions and restrictions of food
employees on the basis of their health activities as they relate to diseases that are transmitted through
foods and the policy is primarily in written form. The person in charge is able to demonstrate a policy
for removal of employee health exclusions and restrictions that is consistent with Tables 1a, 1b, 2, 3, and
4 contained in the FDA Employee Health and Personal Hygiene Handbook. NOTE: Non-typhoidal
Salmonella had not been included in the handbook when this guidance was developed. Reference the
Section 2-201.12 of the 2013 Food Code. Satisfactory compliance may be demonstrated when the
person in charge has available and references the FDA Employee Health and Person Hygiene Handbook
53

and tables as their exclusion / restriction removal policy or produces similar written documents
consistent with the exclusion / restriction removal requirements contained in the handbook and tables.
NOTE: It is acceptable for the establishment’s employee health policy to be more stringent than the
current version of the Food Code.
 NO – Policy only partially developed or non-existent – The person in charge does NOT provide
documentation or otherwise satisfactorily demonstrate during the data collection, a policy for the
removal of exclusions and restrictions of food employees on the basis of their health activities and as
they relate to diseases that are transmitted through foods as per Section 2-201.13 of the Food Code.
 7. Management has a copy of the FDA’s Employee Health and Personal Hygiene Handbook? The
data collector will select YES or NO using the following criteria:

 YES – A copy of the FDA’s Employee Health and Personal Hygiene Handbook or cd is present in the
food establishment at the time of the data collection.
 NO – A copy of the FDA’s Employee Health and Personal Hygiene Handbook or cd is NOT present in
the food establishment at the time of the data collection.

V. FOODSERVICE FOR HIGHLY SUSCEPTIBLE
POPULATIONS
This section of the data collection form is only to be completed for the healthcare facility types, Hospitals and
Long-Term Care facilities. The five questions are specific to foodservice for establishments that prepare and
serve meals to a highly susceptible population.
 1. Is it this establishment’s practice to serve prepackaged juice/beverages that have not been
processed to eliminate pathogens or prepackaged juice/beverage that bears a warning label?

 YES – The person in charge or food employees indicate that raw or partially cooked animal foods are
served to patients or residents of the healthcare facility.
 NO – The person in charge or food employees indicate that raw or partially cooked animal foods are not
served to patients or residents of the healthcare facility.
NOTE: The data collector is to note exceptions contained in Paragraph 3-801.11(F) for instances where
unpasteurized eggs can be used:
(1) The raw eggs are combined immediately before cooking one consumer’s serving at a single meal,
cooked as specified in Section 3-401.11(A)(1), and served immediately, such as an omelet, soufflé, or
scrambled eggs;
(2) The raw eggs are combined as an ingredient immediately before baking and the eggs are thoroughly
cooked to a ready-to-eat form, such as a cake, muffin or bread; or
(3) The preparation of the food is conducted under a HACCP Plan
If one of the above exceptions is conducted in the facility and no other raw or partially cooked animal foods are
served to the patients or residents in the healthcare facility, the data collector is to mark YES as the response
and must provide a comment to describe the practice.
 3. Is it this establishment’s practice to serve raw seed sprouts?

The data collector will select either a YES or NO response based upon discussions with the person in charge or
food employees during the visit. Actual observation of the practice is not a requirement for entering a response
for this data entry field. If an actual observation of the practice is made, the data collector must describe their
observation in the comment section provided under the question.
 YES – The person in charge or food employees indicate that raw/unpasteurized eggs are used in recipes
that may not be fully cooked prior to service or that call for combining of eggs prior to cooking.
 NO – The person in charge or food employees indicate that raw/unpasteurized eggs are not used in
recipes that may not be fully cooked prior to service or that call for combining of eggs prior to cooking.
NOTE: The data collector is to note exceptions contained in Paragraph 3-801.11(F) for instances where
unpasteurized eggs can be used:
(1) The raw eggs are combined immediately before cooking one consumer’s serving at a single meal,
cooked as specified in Section 3-401.11(A)(1), and served immediately, such as an omelet, soufflé, or
scrambled eggs;
(2) The raw eggs are combined as an ingredient immediately before baking and the eggs are thoroughly
cooked to a ready-to-eat form, such as a cake, muffin or bread; or
(3) The preparation of the food is conducted under a HACCP Plan.
If one of the above exceptions is conducted in the facility and no other raw or partially cooked animal foods are
served to the patients or residents in the healthcare facility, the data collector is to mark YES as the response
and must provide a comment to describe the practice.
 5. Is it this establishment’s practice to allow food employees to contact ready-to-eat foods with their
bare hands?

(1) The ready-to-eat food is being added as an ingredient to a food that contains a raw animal food and is to
be cooked to heat all parts of the food to the minimum temperature requirements in Section 3-401.11 of
the Food Code;
(2) The ready-to-eat food is being added as an ingredient to a food that does not contain a raw animal food
but is to be cooked in the healthcare facility to heat all parts of the food to a temperature of a least 63⁰C
(145⁰F).
If one of the above exceptions is conducted in the facility and no other raw or partially cooked animal foods are
served to the patients or residents in the healthcare facility, the data collector is to mark YES as the response
and must provide a comment to describe the practice.

VI. GENERAL MARKING INSTRUCTIONS
A. ORIENTATION TO THE DATA COLLECTION FORM

Data Items – The data collection form consists of 19 data items. The data items are listed numerically and in
BOLD TYPE. In the above illustration, Employees practice proper handwashing is the data item. For the
purposes of this Study, data items 1 through 10 are considered “primary data items”. The information collected
for these data items will be the Study focus for assessing control of foodborne illness risk factors and
determining improvement and/or regression trends over time.
Primary Data Items
Each of the primary data items has been placed under the appropriate FDA Foodborne Illness Risk Factor
category.
 Risk Factor – Poor Personal Hygiene
1. Employees practice proper handwashing
2. Food Employees do not contact ready-to-eat foods with bare hands
 Risk Factor – Contaminated Equipment / Protection from Contamination
3. Food is protected from cross-contamination during storage, preparation, and display
4. Food contact surfaces are properly cleaned and sanitized
 Risk Factor – Improper Holding / Time and Temperature
5. Foods requiring refrigeration are held at the proper temperature
6. Foods displayed or stored hot are held at the proper temperature
59

7. Foods are cooled properly
8. Refrigerated, ready-to-eat foods are properly date marked and discarded within 7 days of preparation
or opening
 Risk Factor – Inadequate Cooking
9. Raw animal foods are cooked to required temperatures
10. Cooked foods are reheated to required temperatures
Other Areas of Interest
Data items 11 through 19 presented below are listed under a section titled “Other Areas of Interest”
 Other Areas of Interest
11. Handwashing facilities are accessible and properly maintained
12. Employees practice good hygiene
13. Consumers are properly advised of risks of consuming raw or undercooked animal foods
14. Time alone is properly used as a public health control
15. Facilities have adequate equipment and tools for ensuring food temperature control and sanitization
of food contact surfaces
16. Special processes are conducted in compliance with issued variance / HACCP Plan when required
17. Food is received from safe sources
18. Toxic materials are identified, used, and stored properly
19. Management and food employees are trained in food allergy awareness as it relates to their assigned
duties
The data items included under the “Other Areas of Interest” section enhance the quality of the Study in one or
more of the following ways:
 The data item represents a food safety practice that was part of FDA’s first 10-year Study. Including the
data item as part of the current FDA Study provides a mechanism for comparing the data from both
studies.
 The data item represents a food safety practice that supports or enables control of one of the primary
data items. For example, accessible, properly maintained handsinks facilitate the ability of food
employees to properly wash their hands.
 The data item provides a method to obtain important information on a food safety practice or procedure
that may be a component of another agency food safety initiative.
Data collectors will attempt to record observations of ALL 19 data items during a visit to an establishment that
has been selected for the Study.
Information Statements / Descriptors – Under most of the data items, a list of information statements is
provided. These information statements are preceded by a letter for organization purposes and describe a
specific observation (food safety practice) associated with the overarching data item it is listed under. Using the
illustration from the previous page, the information statements for the data item – Employees practice proper
handwashing are:
A. Hands are cleaned and properly washed using hand cleanser / water supply / appropriate drying
methods / length of time as specified in Section 2-301.12 of the Food Code.
60

B. Hands are cleaned and washed when required as specified in 2-301.14 of the Food Code
The information statements provide a method for:
 Conducting comparisons with the previous FDA ten-year risk factor study. Some of the information
statements were included as data items on the data collection form used for the first study.
 Recording observations made. Data collectors have an option to check a box rather than write a
narrative statement.
 Enhancing quality assurance pertaining to the interpretation of the data collected. Standard statements
provide a means for maintaining uniformity and consistency among multiple data collectors.

B. MARKINGS FOR DATA ITEMS AND INFORMATION STATEMENTS
Using the current version of the FDA Food Code, the data collector will determine whether the observations
made of the employee food safety practices or behaviors contained in the information statements were IN
Compliance, OUT of Compliance, Not Observed (NO), or Not Applicable (NA). The recorded markings of the
information statements are then used to determine the compliance status of the corresponding data item.
An observation is based on an evaluation of one or more occurrences of a data item or information statement at
an establishment. Specific instructions for marking each data item and information statement are presented later
in this document. The four marking options are defined as follows:
 IN – means that all observed occurrences were IN Compliance with the appropriate FDA Food Code
provision for the data item or information statement.
 OUT – means that one or more of the observations made were OUT of Compliance with the appropriate
FDA Food Code provision for the data item or information statement. An explanation of the specific
criteria used for determining OUT of Compliance for each data item is to be recorded by the data
collector on the data collection form.
 NO – means the data item or information statement was Not Observed during the inspection. The NO
marking is used when an information statement is a usual practice in the food establishment, but the
practice is NOT observed during the time of the inspection. For example, if a restaurant that seasonally
serves shellfish was selected for the study but the inspection occurred during non-shellfish season, then
the information statements “B” and “F” are marked NO for the overarching data item #17 – Food is
received from safe sources as illustrated below.

 NA – means the data item or information statement is Not Applicable. The NA marking is used when a
data item or information statement is NOT a function of the food establishment. Using the data item
table below as an example, if a restaurant does NOT cool cooked foods (information statement “A”), or
does NOT cool foods prepared at ambient temperatures (information statement “B”), then ALL the
information statements pertaining to cooling foods under data item 7 are marked NA. Since all the
information statements (A through D) for this data item were marked NA, the data item will also be
marked NA. More on the marking relationships between information statements and data items is
presented in the next section.

Not all four marking options (IN, OUT, NO, NA) are used for every data item. For instance, in the case of cold
holding, all restaurants included for this data collection period will need to cold hold PHF/TCS food (Data item
5 – Food requiring refrigeration are held at the proper temperature. As a result, the “Not Observed” (NO)
and “Not Applicable” (NA) marking options are inappropriate and are “blacked out” in the graphic displayed
below, given that an observation for cold holding is not only applicable in every case, but is also observable
during the data collection.

C. RELATIONSHIP BETWEEN DATA ITEMS AND INFORMATION STATEMENTS
The marking of a data item is predicated on the observations the data collector has made and recorded for the
information statements. REMINDER: The information statements listed under each data item pertain to
specific food safety practices related to the overarching data item.
Rule #1 for Marking Data Items
One of the four marking options, (IN, OUT, NO, NA) MUST be completed by the data collector for EACH of
the information statements listed under an overarching data item.
Using the illustration below, the two information statements (A and B) under the data item #1 – Employees
practice proper handwashing contains an “X” for one of the marking options.

Rule #2 for Marking Data Items
If ANY of the information statements are marked OUT of Compliance, the data collector must mark the
overarching data item OUT of Compliance.
Using the above illustration, note the markings of observations for the two information statements under the
Employees practice proper handwashing data item. Since information statement “A” is marked OUT of
Compliance, the Employees practice proper handwashing data item must be marked OUT of Compliance.

Rule #3 for Marking Data Items
If an observation (IN or OUT) is made of any information statement, the overarching data item CANNOT be
marked Not Observed (NO) or Not Applicable (NA).
In the illustration presented below, note the markings of observations for the 6 information statements under the
data item #9 – Raw animal foods are cooked to required temperatures.

In the example above, the data collector was only able to observe and record the final cooking temperatures for
hamburgers which would be included under information statement “C”. All the other animal food product
statements were marked either Not Observed (NO) or Not Applicable (NA). Since one of the food safety
procedures is observed (information statement “C”), the data item Raw animal foods are cooked to required
temperatures is observed and must reflect the marking (IN for this example) for that observation. This would
be true regardless of the number of Not Observed (NO) or Not Applicable (NA) markings that may be
associated with the other information statements for that data item.

Rule #4 for Marking Data Items
If no observations (IN or OUT) are made of any information statements but one or more of the information
statements is marked Not Observed (NO) the overarching data item MUST be marked Not Observed (NO)
regardless of the number of information statements for that data item that are marked Not Applicable (NA).
The graphic below illustrates the data item marking instruction for Rule #4.

A data item can only be marked Not Applicable (NA) if ALL the information statements listed are also marked
Not Applicable (NA).
Rule #5 for Marking Data Items
If the observations for all the information statements under a given data item are marked the same, then the
overarching data item MUST be marked the same as the information statements. This is illustrated in the
following graphic where the information statements A through D are marked NA (Not Applicable), therefore
Data Item 7 – Foods are Cooled Properly is also marked NA.

Rule #6 for Marking Data Items
If the information statement labeled “Other” is selected to describe a specific food safety practice related to the
overarching data item, the data collector MUST describe that food safety practice in the “Comment” section
box.
Most of the data items have an information statement labeled “Other”. The inclusion of this information
statement is intended to provide the data collector the opportunity to record an observation of a food safety
practice or procedure that applies to the overarching data item but does not fit into one of the other predetermined information statements.
Summary of the Six Rules for Marking Data Items
NOTE: All six rules for marking data items, summarized in the table below, have been programmed into the
database. The correct marking for the overarching data item will automatically be entered into the system based
on the data collector’s markings for the listed information statements.
Rule

Summary of the Six Rules for Marking Data Items

Rule 1

One of the four marking options, (IN, OUT, NO, NA) MUST be completed by the data collector for
EACH of the information statements listed under an overarching data item.

Rule 2

If ANY of the information statements are marked OUT of Compliance, the data collector must mark
the overarching data item OUT of Compliance.

Rule 3

If an observation (IN or OUT) is made of any information statement, the overarching data item
CANNOT be marked Not Observed (NO) or Not Applicable (NA).

Rule 4

If no observations (IN or OUT) are made of any information statements but one or more of the
information statements is marked Not Observed (NO,) the overarching data item MUST be marked
Not Observed (NO) regardless of the number of information statements for that data item that are
marked Not Applicable (NA).

Rule 5

If the observations for all the information statements under a given data item are marked the same,
then the overarching data item MUST be marked the same as the information statements.

Rule 6

If the information statement labeled “Other” is selected to describe a specific food safety practice
related to the overarching data item, the data collector MUST describe that food safety practice in the
“Comment” section box.

D. COMMENT SECTION FOR EACH DATA ITEM
A “Comments” section is provided for each of the data items as presented in the illustration below.

The data collector is to use the comment section to provide a complete description or clarity to the observations
made of the data item. If a data item or information statement is marked OUT of Compliance, a clear
description of the observation must be provided by the data collector.
Anytime the “Other” information statement is selected as “IN” or “OUT”, the data collector must provide a
complete description of the observation regardless of whether it is IN or OUT of Compliance with the Food
Code.

This page intentionally left blank.

VII. FOOD PRODUCT TEMPERATURE CHARTS
A. DATA ITEMS WITH FOOD PRODUCT TEMPERATURE CHARTS
Food product temperature charts are included for the following five data items:






#5 – Foods requiring refrigeration are held at the proper temperature
#6 – Foods displayed or stored hot are held at the proper temperature
#7 – Foods are cooled properly
#9 – Raw animal foods are cooked to required temperatures
#10 – Cooked foods are reheated to required temperatures

An illustration of the food product temperature chart for data item #5 – Foods requiring refrigeration are held
at the proper temperature is presented below.
Table 1: Cold Holding Temperature Recorded During the Data Collection (List all temperatures taken)

FOOD
PRODUCT

FOOD
TEMP.

FOOD
CODE
CRITICAL
LIMIT

TYPE OF
COLD HOLDING
EQUIPMENT

FOOD
PRODUCT

FOOD
TEMP.

FOOD
CODE
CRITICAL
LIMIT

TYPE OF
COLD HOLDING
EQUIPMENT

Cooked
Chicken

40ºF

41ºF

Walk-in Cooler

Diced Ham

44ºF

41ºF

Refrigerated
Sandwich
Preperation
Table

Raw
Hamburger
Patty

52ºF

41ºF

Refrigeration
Drawer Preparation
Line

Cooked
Pasta

39ºF

41ºF

Walk-in Cooler

41ºF

Refrigerated
Sandwich
Preparation Table

Cooked
Ribs

41ºF

Walk-in Cooler

41ºF

Refrigerated
Sandwich
Preparation Table

41ºF

Refrigerated
Sandwich
Preparation
Table

Sliced
Tomatoes

Egg
Salad

48ºF

42ºF

Tuna Salad

42ºF

Food product temperatures must be taken to make a determination of compliance or non-compliance for data
items 5, 6, 7, 9, and 10. Data collectors are not to rely solely upon discussions with managers or foodservice
personnel to make a determination of compliance or non-compliance.
The data collector is not to stop taking temperature because an OUT of Compliance observation was recorded.
During this version of the Study, FDA is attempting to better quantify the scope of the problem. It is understood
that taking a temperature of every food product is not feasible nor is it necessary. It is essential for the data
collector to obtain a representative sampling of product temperatures held in temperature storage units or
observed being cooked, reheated, or cooled. Quantifying the scope of the problem will be important when
attempts are made during the data analysis to draw correlations related to the impact of food safety management
systems on controlling risk factors that are dependent upon a temperature critical limit for controlling food
safety hazards.
All food product temperature observations (both IN and OUT) must be entered by the data collector into the
food product temperature charts provided. If one food item is found OUT of temperature the overarching data
item covering the specific food safety practice must be marked OUT of Compliance.
Description of Column Headings Contained in Temperature Charts
 Consumer Advisory (specific to the temperature chart for data item #9 – Raw animal foods are
cooked to required temperatures) – Using the current version of the FDA Food Code, the data
collector will determine whether a consumer advisory containing both a disclosure and reminder as
specified with Section 3-603.11 of the Food Code accompanied the raw animal food product from which
a final cooking temperature was obtained. The data collector will select either YES or NO using the
following criteria:
 YES – means that the customer ordered the raw animal food to be undercooked and the food
establishment had a consumer advisory for that menu item that met the disclosure and reminder
requirements specified in Section 3-603.11 of the Food Code.
 NO – means that the customer did not specifically order the raw animal food to be undercooked
or the food establishment did not have a consumer advisory for that menu item that met the
disclosure and reminder requirements specified in Section 3-603.11 of the Food Code.
 Final Cook Temp. – Final internal temperature of a food product measured by the data collector
immediately upon completion of the cooking process, using a calibrated temperature measuring device.
 Final Reheat Temp. – Final internal temperature of a food product measured by the data collector
immediately upon completion of the reheating process, using a calibrated food temperature measuring
device.
Food Code Critical Limit – The quantitative temperature measurement provided in the FDA Food
Code for controlling microbiological food safety hazards associated with the data item.
 Food Product – Common name or menu designation associated with the food product. The data
collector is not expected to list all ingredients that may be part of a product, such as a casserole.
Identifying the primary ingredient is sufficient, such as the designation tuna casserole.
 Food Temp. – Internal food product temperature measured by the data collector using a calibrated food
temperature measuring device.
 Food Cooling Temp. #1 – Initial internal product temperature of cooked TCS food or TCS food
prepared from ambient ingredients that are in the process of cooling. The data collector must make
every effort to assess cooling processes in the early part of the data collection and record this Food
Temp. #1 at the beginning, or near the beginning, of the establishment visit
70

NOTE: The data collector may encounter instances where a cooked time-temperature control for safety
food product was prepared the day before and is still going through the cooling process the next
morning. In such cases, the data collector will enter “UNK” in the Food Cooling Temp. #1 data entry
field because the product was put into the cooling process the night before and an initial temperature
was not obtainable.
 Food Cooling Temp. #2 – Internal product temperature of cooked TCS food or TCS food prepared from
ambient ingredients that the data collector assessed near the end of the data collection. This second
temperature reading is from the same food product observed cooling at the beginning of the inspection
from which Food Cooling Temp. #1 (above) was obtained. It provides a method for assessing the
cooling rate based on the elapsed time between the first and second temperature measurements.
 Total Time in Minutes – Represents the total elapsed time in minutes between the data collector’s Food
Temp. #1 measurement and their Food Temp. #2 measurement of the cooked TCS food or TCS food
prepared from ambient ingredients that are in the process of cooling.
NOTE: For instance where the time-temperature control for safety food had been prepared the day
before and is still in the cooling process the next day, the data collector will enter “O/N” in the Total
Time in Minutes data entry field. If the data collector entered “UNK” in the Food Cooling Temp. #1
field as described in the note section of that item on the previous page, the database will automatically
default to the “O/N” entry.
 Type of (Cold Holding / Hot Holding / Used to Cool Food) Equipment – A drop down menu is
included in the database listing different types of equipment used to maintain or achieve control of food
product temperature. Make and model numbers of the equipment are NOT required
Data collectors are to select their equipment type entry from the menu list. Data collectors can select the
“Other” option if the equipment type is not present on the drop down menu. After selecting the “Other”
option, the data collector is to enter the equipment type in the comment section for that data item making
a reference to the food product to which it relates.

B. SUMMARY – PRODUCT TEMPERATURE CATEGORIES
Summary tables for food product temperatures categories are included for the following four data items:
#5 – Foods requiring refrigeration are held at the proper temperature
#6 – Foods displayed or stored hot are held at the proper temperature
#9 – Raw animal foods are cooked to required temperatures
#10 – Cooked foods are reheated to required temperatures
An illustration of the product temperature summary tables for data item #5 – Foods requiring refrigeration
are held at the proper temperature is present below.
Table 2: Cold Holding Temperatures Recording During the Data Collection (List all temperatures taken)

FOOD
PRODUCT

FOOD
TEMP.

FOOD
CODE
CRITICAL
LIMIT

TYPE OF
COLD HOLDING
EQUIPMENT

FOOD
PRODUCT

FOOD
TEMP.

FOOD
CODE
CRITICAL
LIMIT

TYPE OF
COLD HOLDING
EQUIPMENT

Cooked
Chicken

40ºF

41ºF

Walk-in Cooler

Diced Ham

44ºF

41ºF

Refrigerated
Sandwich
Preperation
Table

Raw
Hamburger
Patty

52ºF

41ºF

Refrigeration
Drawer Preparation
Line

Cooked
Pasta

39ºF

41ºF

Walk-in Cooler

Sliced
Tomatoes

48ºF

41ºF

Refrigerated
Sandwich
Preparation Table

Cooked
Ribs

41ºF

Walk-in Cooler

41ºF

Refrigerated
Sandwich
Preparation Table

41ºF

Refrigerated
Sandwich
Preparation
Table

Egg
Salad

42ºF

Tuna Salad

42ºF

NUMBER OF
FOOD PRODUCT
TEMPERATURES

SUMMARY
COLD HOLDING PRODUCT TEMPERATURE
CATEGORIES

I. – Number of product temperature measurements IN Compliance with Food Code critical
limits

II. – Number of OUT of Compliance product temperature measurements 1ºF - 2ºF above
Food Code critical limits

III. – Number of OUT of Compliance product temperature measurements 3ºF - 4ºF above
Food Code critical limits

IV. – Number of OUT of Compliance product temperature measurements 5ºF - 9ºF above
Food Code critical limits

V. – Number of OUT of Compliance product temperature measurements 10ºF or more
above Food Code critical limits

After the data collection has been completed, the results of the compliance status of observations made of all
internal food product temperatures will be recorded in the summary table provided for data items #5, #6, #9,
and #10.
The retail food risk factor study database has been designed to automatically populate the temperature summary
table with the total number of internal food product temperatures recorded in the data item temperature chart for
each of the following five categories:
I.
II.
III.
IV.
V.

Number of food product temperature measurements IN Compliance with Food Code critical limits.
Number of OUT of Compliance food product temperature measurements 1ºF - 2ºF (above / below)
Food Code critical limits.
Number of OUT of Compliance food product temperature measurements 3ºF - 4ºF (above / below)
Food Code critical limits.
Number of OUT of Compliance food product temperature measurements 5ºF - 9ºF (above / below)
Food Code critical limits.
Number of OUT of Compliance food product temperature measurements 10ºF or more (above /
below) Food Code critical limits.

NOTE: The data collector should verify that the temperature summary tables display the total number of
internal food temperature for the five categories described above.
73

This page intentionally left blank.

VIII. FOOD SAFETY MANAGEMENT SYSTEM
ASSESSMENTS
A. PROTOCOL FOR CONDUCTING A FOOD SAFETY MANAGEMENT SYSTEM ASSESSMENT
The design of the Study includes the collection of information on the industry food safety management system
in place to control four key risk factor areas and selected data items for each as presented below:
1 – Poor Personal Hygiene
Data Item #1 – Employees practice proper handwashing
Data Item #2 – Employees do not contact ready-to-eat foods with bare hands
2 – Protection from Contamination / Contaminated Equipment
Data Item #3 – Food is protected from cross-contamination during storage, preparation, and display
Data Item #4 – Food contact surfaces are properly cleaned and sanitized
3 – Improper Holding / Time and Temperature
Data Item #5 – Foods requiring refrigeration are held at the proper temperature
Data Item #6 – Foods displayed or stored hot are held at the proper temperature
Data Item #7 – Foods are cooled properly
Data Item #8 – Refrigerated, ready-to-eats foods are properly date marked and discarded within 7 days of
preparation or opening
4 – Inadequate Cooling / Reheating
Data Item #9 – Raw animal foods are cooked to required temperatures
Data Item #10 – Cooked foods are reheated to required temperatures
Each food establishment selected for the study will have a food safety management system assessment
conducted for one of the four risk factor areas described above. The Biostatistics Branch will randomly select
the risk factor area that will be the focus of the food safety management system assessment within each of the
establishments.
The data collector will evaluate the presence of three key food safety management system elements (procedures,
training, and monitoring) for all the primary data items listed under the assigned risk factor.
 Procedures – A defined set of actions adopted by food service management for accomplishing a task in
a way that minimizes food safety risks.
 Training – Management informs employees what the procedures are and teaches the employees how to
carry them out. This is not to be used for determining manager knowledge or certification
 Monitoring – Routine observations and measurements made by management to determine if procedures
are being followed and maintained.
For each of these three food safety management system elements, the data collector will determine if the
information provided by the establishment management adequately addresses the essential critical limits for the
assigned risk factor area. In addition to covering the pertinent critical limits pertaining to the assigned risk
75

factor area, industry management is to provide a clear, understandable description of the system in place for
procedures, training, and monitoring using the guidance at the top the following page.
A food safety management system assessment questionnaire has been developed for each of the foodborne
illness risk factor areas. These assessment tools are included as Appendices with these instructions.
•
•
•
•

Attachment A – Food Safety Management System Assessment – Poor Personal Hygiene Risk Factor
Attachment B – Food Safety Management System Assessment - Protection from Contamination /
Contaminated Equipment Risk Factor
Attachment C – Food Safety Management System Assessment – Improper Holding / Time and
Temperature Risk Factor
Attachment D – Food Safety Management System Assessment – Inadequate Cooking / Reheating Risk
Factor

For each of the data items listed under the risk factor area on the previous page, the data collector will
individually assess each of the three food safety management system elements (Procedures, Training, and
Monitoring). The chart below contains the four statements related to handwashing procedures.
HANDWASHING

Using an effective interview process the data collector will solicit information from the person in charge to
respond “Yes” or “No” to the four statements listed under each of the Procedures, Training, and Monitoring
elements.
NOTE: Data collectors are strongly encouraged to use a conversational approach to obtain information from
the person in charge on their food safety management system rather than using the tool to drive questions in the
order the statements appear.
Using the information gathered from the interview, the data collector will answer “YES” or “NO” to each of the
first three statements under the food safety management system element (Procedures, Training, or Monitoring)
they are assessing. Each of the three statements is to be answered independently of one another.
As an example, the chart at the top this page contains an assessment of the procedures in place for handwashing.
During the interview process, the person in charge described a handwashing procedure that included critical
limits that did not meet minimum requirements for controlling hazards of concern. Therefore the data collector
marked “NO” to the first statement. The person in charge was, however, able to provide a sound management
76

structure for how and when handwashing is done in the facility and who is responsible for following the
procedure. The data collector marked statements #2 and #3 “YES” based on this information.
After marking the first three statements, the data collector reviews the responses. If ALL three statements are
marked “YES”, the data collector will then mark a response “YES” or “NO” to the last question in the shaded
row. The fourth question in the shaded row is designed to assess whether there are written materials to support
the food safety management system element (Procedures, Training, or Monitoring).
If any of the first three statements have been marked “NO”, the data collector does not enter a response for the
shaded statement. The first three statements MUST be marked “YES” for the data collector to enter a response
for the fourth statement.

B. FOOD SAFETY MANAGEMENT SYSTEM ASSESSMENT – RATING SYSTEM
The data collector is to use the chart provided under each of the data items on the data collection form to
document the rating level for each of the three food safety management system elements (procedures, training,
monitoring). An example of this food safety management system chart is displayed below.

The food safety management system assessment will be conducted during the same establishment visit but
independent from the determination of compliance with the Food Code for each of the data items.
Using the food safety management system assessment tool, the data collector will add up the total number of
“YES” responses for each of the management system elements (Procedures, Training, and Monitoring). The
number of “YES” responses on the assessment tool will determine how to mark the Procedures, Training, And
Monitoring sections for the data item on the data collection form.
Each rating number is broadly defined below:
1. Non-Existent – No system in place or haphazardly implemented (no defined structure or frequency for
implementation). If the number of “YES” responses is “0” or “1”, mark the data collection form “1”
for that management system (Procedures, Training, or Monitoring) element.
2. Underdeveloped – System is in early development. Efforts are being made, but there are crucial gaps
in completeness and/or consistency. If the number of “YES” responses is “2”, mark the data
collection form “2” for that management system (Procedures, Training, or Monitoring) element.
3. Well Developed – System is complete, consistent and oral or a combination of oral and written. The
preponderance of the management system is oral. . If the number of “YES” responses is “3”, mark the
data collection form “3” for that management system (Procedures, Training, or Monitoring) element.
77

4. Well Developed and Documented – System is complete, consistent and primarily written. The
preponderance of the management system is written. This is the goal for all establishments. If the
number of “YES” responses is “4”, mark the data collection form “4” for that management system
(Procedures, Training, or Monitoring) element.
In the “COMMENT” section of the data collection form, provide a description of any scenarios that presented
some challenges in assigning a 1-4 marking for a management system element.
It is quite possible that an establishment may not perform all the food safety practices listed under a specific risk
factor area. For example, if the Improper Holding / Time and Temperature risk factor is selected for a food
safety management system assessment, four different food safety practices (data items) are to be included as
part of the review process:
•
•
•
•

Data Item #5 – Cold Holding of TCS Food
Data Item #6 – Hot Holding of TCS Food
Data Item #7 – Cooling of TCS Food
Data Item #8 – Date Marking of Ready-to-Eat TCS Food

There may be instances where an establishment may not perform all the food safety practices that comprise the
risk factor. Using the above example, if the establishment does not perform cooling of time-temperature control
for safety foods, Data Item #7 – Cooling of TCS Foods would be marked “NA”. Since the establishment does
not conduct any cooling processes, the data collector would not conduct a food safety management assessment
of cooling practices. The data collector would mark “NA” for the Procedure; Training; and Monitoring
assessment of Data Item #7 because the cooling foods was not done in the facility.

The “NA” marking can only be used for the Procedures; Training; and Monitoring assessment when the overall
data item is marked “NA” as well.

IX. HANDWASHING FREQUENCY ASSESSMENT
A. HANDWASHING FREQUENCY ASSESSMENT PROTOCOL
The data collector will record all of his or her handwashing observations during the regular data collection using
the “Handwashing Frequency Assessment” located under data item #1 – Employees practice proper
handwashing on the Data Collection Form. Over the course of the data collection visit, the Specialist will
record a tally of each time an employee is observed doing the following:
•

Washing hands properly and when required,

•

Washing hands improperly, or

•

Failing to wash hands when required.

Additional time should not be allocated for the observation of handwashing practices. It should be collected
through the normal course of conducting observations of other food safety procedures during the data collection
visit. Data collectors should recognize their limitations with this aspect of the study. The assessment of
handwashing frequency in the context of this study is to provide a broad-based indicator of handwashing
practices and will not be used to draw statistical conclusions. It will be impossible to assess every activity
during which handwashing should occur so the precision needed for statistical analysis will not be achievable.
Assessing handwashing frequency is intended to provide some context to the IN / OUT marking for Data Item
#1 – Employees practice proper handwashing.
79

The data collector should do their best to assess handwashing when the opportunity arises during the normal
course of the visit. The data collector should not forgo an opportunity to observe and assess a food safety
practice or procedure related to a primary data item in order to follow an employee to determine if hands are
washed when needed using effective cleaning procedures.
NOTE: The adherence to good handwashing practices may vary greatly from one facility to another. The
expectation for the data collector is to make observations of employees washing their hands when they should
and washing their hands properly. Should a data collector observe continued failure of employees to wash their
hands when they should, immediate corrective action should be taken with the person-in-charge or directly with
the food employee to ensure proper handwashing takes place and is observed. If the data collector needed to
take corrective action to observe handwashing procedures, it must be noted in the “Comment” section under
data item #1.

B. ASSURING MARKING CONSISTENCY WITH DATA ITEM
The data collected on the Handwashing Frequency Assessment form should match the data results recorded
for data item #1 – Employees practice proper handwashing. For example, if any observations are recorded
under column C2 or C3 in the above Handwashing Frequency Assessment form, then data item #1 – Employees
practice proper handwashing” on the data collection form for that establishment should be marked “OUT”.

X. DATA ITEMS AND INFORMATION STATEMENTS
REMINDER – SIX RULES FOR MARKING DATA ITEMS
NOTE: All six rules for marking data items, summarized in the table below, have been programmed into the
database. The correct marking for the overarching data item will automatically be entered into the system based
on the data collector’s markings for the listed information statements.
Table 3: Summary of the Six Rules for Marking Data Items

Rule

Summary of the Six Rules for Marking Data Items

Rule 1

One of the four marking options, (IN, OUT, NO, NA) MUST be completed by the data collector for
EACH of the information statements listed under an overarching data item.

Rule 2

If ANY of the information statements are marked OUT of Compliance, the data collector must
mark the overarching data item OUT of Compliance.

Rule 3

If an observation (IN or OUT) is made of any information statement, the overarching data item
CANNOT be marked Not Observed (NO) or Not Applicable (NA).

Rule 4

If no observations (IN or OUT) are made of any information statements but one or more of the
information statements is marked Not Observed (NO,) the overarching data item MUST be
marked Not Observed (NO) regardless of the number of information statements for that data item
that are marked Not Applicable (NA).

Rule 5

If the observations for all the information statements under a given data item are marked the same,
then the overarching data item MUST be marked the same as the information statements.

Rule 6

1. Employees practice proper handwashing

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the
above data item and information statements.
NOTE: The data item Employees practice proper handwashing MUST be marked IN or OUT of compliance.
The data collector must be in the restaurant facility long enough to make observations of handwashing practices
for both information statement 1A and 1B. The data collector is to rely only on actual observations of
handwashing practices. Should a data collector observe continued failure of employees to wash their hands
when they should, immediate corrective action should be taken with the person-in-charge or directly with the
food employee to ensure proper handwashing takes place and is observed. If the data collector needed to take
corrective action to observe handwashing procedures, it must be noted in the “Comment” section under data
item #1.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 2-301.12P
IN – Mark IN when food employees are observed washing their hands as specified in Section 2-301.12 of the
Food Code
A
OUT – Mark OUT when ONE or MORE food employees are observed failing to follow the handwashing
procedures specified in Section 2-301.12 of the Food Code.
This information statement CANNOT be marked NO or NA
FOOD CODE REFERENCE: 2-301.14(A-I)P
IN – Mark IN when food employees are observed washing hands when required as specified in Section 2-301.14
of the Food Code

OUT – Mark OUT when ONE or MORE food employees are observed failing to wash their hand when required
as specified in Section 2-301.14 of the Food Code
NOTE: Change / Clarification included in the 2013 Food Code – If an employee washes their hands before
beginning a food procedure and then dons gloves, they are not required to wash their hands between subsequent
glove changes if they do not change tasks.
This information statement CANNOT be marked NO or NA

2. Food employees do not contact ready-to-eat foods with bare hands

● Data item 2 does not contain any information statements. The language in the data item is intended to
be all encompassing of observations related to bare hand contact of exposed ready-eat-foods.
● Since this data collection period is focusing on the restaurant segment of the industry, data collectors
CANNOT select the NO or NA marking options that have been BLACKED-OUT. All restaurants
selected for the Study will have processes that include preparation or service of ready-to-eat foods.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-301.11(B)P
IN – Mark IN when food employees are observed using suitable utensils or single-use gloves to prevent bare hand
contact with exposed ready-to-eat foods OR are observed properly following a pre-approved alternative procedure
to no bare hand contact. NOTE: When fruits and vegetables are being washed, food employees may touch them
with their bare hands.
OUT – Mark OUT when ONE or MORE food employees are observed touching exposed ready-to-eat foods
with their bare hands OR are observed NOT properly following a pre-approved alternative procedure to no bare
hand contact. NOTE: This data item MUST be marked OUT of compliance if one person is observed touching
exposed ready-to-eat foods with their bare hands.
This information statement CANNOT be marked NO or NA

3. Food is protected from cross-contamination during storage, preparation, and
display

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item and information statement.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-302.11(A)(1)P
IN – Mark IN when direct observations of food storage and handling practices verifies separation of raw animal foods
from ready-to-eat foods. Frozen, commercially packaged raw animal food stored or displayed with or above frozen,
commercially packaged ready-to-eat foods is to be marked IN.
A

OUT – Mark OUT when direct observations of food storage and handling practices indicates a lack of proper, adequate
separation of ONE or MORE raw animal foods from ready-to-eat foods.
NO – Mark NO when raw animal foods are used or served periodically but none are present at the time of the data
collection and the data collector is unable to observe raw animal food storage and handling practices.
NA – Mark NA when there are no raw animal foods used in the facility or only prepackaged foods are served.
FOOD CODE REFERENCE: 3-302.11(A)(2)P
IN – Mark IN when direct observations of food storage and handling practices verifies separation of raw animal foods
by species based on minimum cooking temperatures by spacing or placing in separate containers.

OUT – Mark OUT when direct observation of food storage and handling practices indicates a lack of proper, adequate
separation of ONE or MORE raw animal foods by species based on minimum cooking temperatures.
NO – Mark NO when MORE THAN ONE raw animal food species are used or served periodically but none are
present at the time of the data collection and the data collector is unable to observe food storage and handling practices
related to multiple raw animal food species.
NA – Mark NA when there are no raw animal foods used in the facility or only one raw animal food is used or only
prepackaged foods are sold.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-302.11(A)(4-8)C; 3-304.11(B)P; 3-304.15(A)P; 3-306.13(A)P
IN – Mark IN when direct observations of food storage and handling practices verifies NO instances of ACTUAL
environmental contamination of food (such as compressor drainage dripping on food; splash from mop water contacting
food; etc.).
C
OUT – Mark OUT when direct observation of food storage and handling practices indicates ACTUAL environmental
contamination of ONE or MORE foods (i.e., compressor drainage is dripping on food; splash from mop water is
observed making contact with food, etc.)
This information statement CANNOT be marked NO or NA
FOOD CODE REFERENCES: 3-302.11(A)(4-8)C; 3-304.11(B)P; 3-304.15(A)P; 3-306.11P; 3-306.12(A)C; 3306.13(A)P

IN – Mark IN when direct observations of food storage and handling practices verifies NO POTENTIAL for
environmental contamination of food (such as food in uncovered containers; hermetically sealed containers of food that
are visibly soiled before opening,; food set out for display unprotected from potential contamination by the public, etc.).
OUT – Mark OUT when direct observations of food storage and handling practices create conditions for POTENTIAL
environmental contamination of food (such as food in uncovered containers; hermetically sealed containers of food that
are visibly soiled before opening,; food set out for display unprotected from potential contamination by the public, etc.).
This information statement CANNOT be marked NO or NA

Marked IN / OUT when a food procedure or practice pertaining to protecting food from cross contamination IS
observed and not accurately described in the previous information statements for this data item and represents a food
procedure / practice that is designated as a PRIORITY ITEM in the Food Code. If the “Other” information statement
is marked IN or OUT, the data collector MUST provide a description of the observation in the “Comment” section for
the data item.
NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for foods protected from contamination are observed.
The NO marking is NOT used for the “Other” information statement.

4. Food contact surfaces are properly cleaned and sanitized

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item and information statement.
● NOTE: Information statement 4A will require some judgment to be used when marking the
information statements IN or OUT of compliance. The information statement should be marked OUT of
compliance if observations are made that support a pattern of non-compliance with the procedure or
practice. One soiled utensil or food contact surface or one sanitizer container without sanitizer, would
not necessarily support an OUT of Compliance marking. The data collector MUST complete the
comment section when an OUT of Compliance marking is documented for one or more of the
information statements.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 4-601.11(A)PF(B)C; 4-602.11P&C; 4-602.12C; 4-702.11P
NOTE: Information statement “A” is specific to observations of clean and sanitized dishware, utensils, and cookware
that have been stored and are considered ready-for-use. Do NOT include observations made of food contact surfaces
and utensils that are part of a manual warewashing procedure or cleaning / sanitizing in place equipment which are
addressed in information statement “B”. Do NOT include observations of food contact surfaces and utensils as part of a
mechanical warewashing procedure which is addressed in information statement “C”.
A

IN – Based on an overall assessment of the establishment’s operation, mark IN when direct observations indicate a
substantive pattern for properly cleaning and sanitizing dishware, utensils, and cookware that are in-use or considered
ready-for-use.
OUT – Based on an overall assessment of the establishment’s operation, mark OUT when direct observations indicate a
substantive pattern of soiled and/or un-sanitized dishware, utensils, and cookware that are in use or considered readyfor-use.
This information statement CANNOT be marked NO or NA

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 4-303.11; 4-501.111P; 4-501.114P; 4-501.115C; 4-703.11(A), (B), or (C)P
NOTE: Information statement “B” is specific to observations of cleaned and sanitized food contact surfaces as part of a
manual warewashing or clean-in-place procedure. Do NOT include observations of cleaned and sanitized dishware,
utensils, and cookware that have been stored and are considered ready-for-use which are addressed as part of
information statement “A”. Do NOT include observations of food contact surfaces and utensils as part of a mechanical
warewashing procedure which is addressed in information statement C.
IN – Mark IN when direct observations indicate the proper washing and sanitizing of dishes / utensils using a
MANUAL procedure or clean-in-place procedures for equipment such as a meat slicer, large mixer, microwave oven,
tilting kettle, etc., result in food contact surfaces that are cleaned and sanitized. Examples for this information statement
would include observations of food contact surfaces and equipment being properly washed, rinsed, and sanitized in a
three compartment sink or observations of the cleaning and sanitization of a tilting kettle (CIP).
B

OUT – Mark OUT when direct observations indicate the lack of, or improper methods / procedures for, washing and
sanitizing of dishes / utensils using a MANUAL procedure or clean-in-place equipment such as a meat slicer, large
mixer, microwave oven, tilting kettle, etc., result in food contact surfaces that are NOT cleaned and sanitized. Examples
would include observations of food contact surfaces and equipment immersed in sanitizing concentrations lower than the
critical limits contained in the Food Code; or washing food contact surfaces in dirty water containing little of no
detergent solution; or washing food contact surfaces using an improper set-up of the three compartment sink, such as
wash-sanitize-rinse; etc. NOTE: Lack of temperature measuring devices and/or chemical tests kits for determining
sanitizing rinse temperatures and/or sanitizer concentration is NOT marked under information statement “B” --- mark
these observations under information statement “15E”.
NO – Mark NO when washing and sanitizing dishes / utensils using a MANUAL procedure is part of the
establishment’s operation but is not conducted during the data collection.
NA – Mark NA when all equipment and utensils are washed and sanitized in a mechanical dish machine.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 4-303.11; 4-501.113C; 4-501.114P; 4-703.11(B) and (C)P
NOTE: Information statement “C” is specific to observations of cleaned and sanitized food contact surfaces as part of a
mechanical warewashing procedure. Do NOT include observations of cleaned and sanitized dishware, utensils, and
cookware that have been stored and are considered ready-for-use which are addressed as part of information statement
“A”. Do NOT include observations of food contact surfaces and utensils as part of a manual warewashing procedure or
clean-in-place equipment such as a meat slicer which is addressed in information statement “B”.
NOTE: Observations related to accurate temperature measuring devices and/or test kits provided and accessible for use
to measure sanitization rinse temperatures and/or sanitization concentration are recorded under information statement
“15E”.
IN – Mark IN when direct observations of food contact surfaces and utensils indicate the proper washing and sanitizing
of dishes / utensils using a MECHANICAL procedure. An example would include observations (visual inspection) of
dishware indicating no food debris remaining on surfaces after the mechanical warewashing process has been completed
and proper sanitization temperature or concentration has been measured and meets Food Code critical limits.
C
OUT – Mark OUT when direct observations of dishware and food contact surfaces indicate the lack of, or improper
methods / procedures for, washing and sanitizing of dishes / utensils using a MECHNICAL procedure resulting in
dishware or food contact surfaces that are NOT cleaned and sanitized. Examples of observations include a pattern of
dishware containing food debris after the mechanical warewashing procedure has been completed; or measurements of
the hot water or chemical sanitization in the final rinse cycle does NOT meet Food Code critical limits Observations of
this information statement are specific to whether the food contact surface is cleaned and sanitized. Do NOT mark
observations of equipment defects, such as a broken temperature gauge, missing baffle plate, etc., under this information
statement. NOTE: Lack of temperature measuring devices and/or chemical tests kits for determining sanitizing rinse
temperatures and/or sanitizer concentration is NOT marked under information statement “C”--- mark these observations
under information statement “15E”.
NO – Mark NO when washing and sanitizing dishes / utensils using a MECHANICAL procedure is part of the
establishment’s operation but is not conducted during the data collection.
NA – Mark NA when all equipment and utensils are washed and sanitized using a manual procedure.

Marked IN / OUT when a food procedure / practice related to the cleaning and sanitizing of food contact surfaces IS
observed and not accurately described in the previous information statements for this data item, and represents a food
procedure / practice that is designated as a PRIORITY ITEM in the Food Code. If the “Other” information statement
is marked IN or OUT, the data collector MUST provide a description of the observation in the “Comment” section for
the data item.
NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for the cleaning and sanitizing of food contact surfaces are observed.
The NO marking is NOT used for the “Other” information statement.

5. Foods requiring refrigeration are held at the proper temperature

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item and information statements.
● NOTE: ALL observations MUST be based on actual food product temperature measurements using a
calibrated food temperature measuring device. The data collector should verify that the TCS food
requiring refrigeration is not in the process of cooling, or being held using time as a public health
control; or has been processed in such a manner as to render it a non-TCS food. ALL food product
temperatures taken are to be recorded in the temperature chart on the data collection form. If ONE
product is found to be out of temperature, the appropriate information statement for that food product is
marked OUT of Compliance.
● NOTE: Observations made of procedures where Time, is used as a Public Health Control as it pertains
to TCS foods that would normally be held under refrigeration temperatures are to be recorded for
information statement “14B”. Do NOT record any product temperatures in the cold food product
temperature log if it is the intention of the operation’s management to use Time as a Public Health
Control.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-501.16(A)(2)P
IN – Mark IN when ALL product temperatures taken of TCS food requiring refrigeration are 41ºF or below.

OUT – Mark OUT when ONE or MORE product temperatures taken of TCS food requiring refrigeration are above
41ºF,
NOTE: Do NOT assess the cold holding of raw shell eggs as part of this information statement. Cold holding of raw
shell eggs is assessed under information statement 6(B).
This information statement CANNOT be marked NO or NA.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-501.16(B)P
IN – Mark IN when the AMBIENT air temperature of the refrigeration equipment used for the storage of raw shell eggs
is maintaining 45ºF or below.
B

OUT – Mark OUT when the AMBIENT air temperature of the refrigeration equipment used for the storage of raw shell
eggs is above 45ºF.
NO – Mark NO when the establishment receives raw shell eggs but there were no raw shell eggs on the premises at the
time of the data collection.
NA – Mark NA when the establishment does not receive raw shell eggs

Mark IN / OUT when a cold holding procedure or practice IS observed and not accurately described in the previous
information statements for this data item. If the “Other” information statement is marked IN or OUT, the data collector
MUST provide a description of the observation in the “Comment” section for the data item.
C

NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for cold holding are observed.
The NO marking is NOT used for the “Other” information statement.

6. Foods displayed or stored hot are held at the proper temperature

● Data collectors CANNOT select marking option that has been BLACKED-OUT for the above
information statement.
● NOTE: ALL observations MUST be based on actual food product temperature measurements using a
calibrated food temperature measuring device. ALL food product temperatures taken are to be recorded
in the temperature chart on the data collection form. If ONE product is found to be out of temperature
the appropriate information statement for that food product is marked OUT of Compliance.
● NOTE: Observations made of procedures where Time, is used as a Public Health Control as it pertains
to TCS foods that would normally be held hot are to be recorded for information statement “14A”. Do
NOT record any product temperatures in the hot food product temperature log if it is the intention of the
operation’s management to use Time as a Public Health Control.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-501.16(A)(1)P
NOTE: Do NOT assess hot holding of roasts as part of this information statement. Hot holding of roasts is assessed
under information statement 7(B).
IN – Mark IN when ALL product temperatures taken of TCS food that is being held hot are 135ºF or above.
A

OUT – Mark OUT when ONE or MORE product temperatures taken of TCS food that is being held hot are below
135ºF,
NO – Mark NO when the establishment does hot hold foods, but no foods are being held hot during the data collection.
NOTE: Every attempt should be made to conduct the data collection during a time when hot holding temperatures can
be taken.
NA – Mark NA when the establishment does not hot hold food.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-501.16(A)(1)P
IN – Mark IN when ALL product temperatures taken of ROASTS that are being held hot are 130ºF or above.

OUT – Mark OUT when ONE or MORE product temperatures taken of ROASTS that are being held hot are less than
130ºF.,
AND time is not used as a public health control.
NO – Mark NO when the establishment hot holds cooked roasts but no roasts are being held hot during the data
collection.
NA – Mark NA when the establishment does not prepare or serve roasts

Mark IN / OUT when a hot holding procedure or practice IS observed and not accurately described in the previous
information statements for this data item. If the “Other” information statement is marked IN or OUT, the data collector
MUST provide a description of the observation in the “Comment” section for the data item.
C

NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for hot holding are observed.
The NO marking is NOT used for the “Other” information statement.

7. Foods are cooled properly

● Data collectors CANNOT select marking option that has been BLACKED-OUT for the above
information statement.
● NOTE: Production documents, as well as statements from managers, the person-in-charge, and food
employees regarding the time the cooling process was initiated, may be used to supplement actual
observations. The data collector MUST make every effort to assess cooling processes in the early part
of the data collection. If TCS foods are in the cooling process during the data collection visit, a
MINIMUM of two food product time and temperature checks are to be obtained and recorded in the
temperature chart provided on the data collection form. Food Cooling Temperature #1 is the initial
internal product temperature of a cooked TCS food OR TCS food prepared from ambient ingredients
that is taken at the beginning, or near the beginning, of the establishment visit. Food Cooling
Temperature #2 is the internal product temperature of the cooked TCS food OR TCS food prepared
from ambient ingredients that the data collector assessed near the end of the data collection. This second
temperature reading is from the same TCS food observed cooling at the beginning of the data collection
from which Food Cooling Temperature #1 was obtain. These two temperature measurements provide a
method for assessing the cooling rate based on the elapsed time between the first and second
temperature measurements.
● NOTE: The predictive modeling for cooling rates as presented in FDA’s FD 218 Risk Based Inspection
course can be used as a supplemental reference to determine compliance status for cooling observations.
The predictive modeling guidance (included as Attachment E) is NOT to be used only in conjunction
with quantitative temperature measurements but MUST be used as part of a holistic assessment of ALL
information obtained during the data collection regarding the cooling process, equipment, methods,
records, etc.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-501.14(A)P
IN – Mark IN when ALL product temperatures taken of cooked TCS foods that are being cooled meet the Food Code
time-temperature critical limits of 135ºF to 70ºF within 2 hours AND from 135ºF to 41ºF or below within 6 hours
OUT – Mark OUT when ONE or MORE product temperatures taken of cooked TCS food that are being cooled do
NOT meet the Food Code time-temperature critical limits of 135ºF to 70ºF within 2 hours AND/OR from 135ºF to 41ºF
or below within 6 hours.

NOTE: Quantitative measurements MUST be used in conjunction with an assessment of ALL information obtained
during the data collection including cooling methods, equipment, records, and information provided by food
management and food employees.
NO – Mark NO when the establishment does cool cooked TCS foods, but no TCS foods are being cooled during the
data collection. NOTE: Not Observed (NO) can also be marked when the data collector is uncertain, based on the timetemperature assessment conducted during the data collection, whether the cooked TCS food will cool within the
appropriate time frames.
NOTE: An IN or OUT marking of information statements C regarding cooling methods / equipment CAN still be
recorded even though quantitative measurements fail to provide definitive information as to the cooling rate of the food.
NA – Mark NA when the establishment does not cool cooked TCS food.
FOOD CODE REFERENCE: 3-501.14(B)P
IN – Mark IN when ALL product temperatures taken of TCS food prepared from ambient ingredients that are being
cooled meet the Food Code time-temperature critical limits of reaching 41ºF or below within 4 hours..
OUT – Mark OUT when ONE or MORE product temperatures taken of TCS food prepared from ambient ingredients
that are being cooled do NOT meet the Food Code time-temperature critical limits of reaching 41ºF or below within 4
hours.

NOTE: Quantitative measurements MUST be used in conjunction with an assessment of ALL information obtained
during the data collection including cooling methods, equipment, records, and information provided by food
management and food employees.
NO – Mark NO when the establishment does cool TCS foods prepared from ambient ingredients, but no TCS food
prepared from ambient ingredients are being cooled during the data collection. NOTE: Not Observed (NO) can also be
marked when the data collector is uncertain, based on the time-temperature assessment conducted during the data
collection, whether the TCS food prepared from ambient ingredients will cool within 4 hours.
NOTE: An IN or OUT marking of information statements C cooling methods / equipment CAN still be recorded even
though quantitative measurements fail to provide definitive information as to the cooling rate of the food.
NA – Mark NA when the establishment does not cool TCS foods prepared from ambient ingredients.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-501.15(A)Pf(B)C; 4-301.11Pf
IN – Mark IN when the cooling process IS observed and the METHODS / EQUIPMENT (shallow pans; smaller
thinner portions, ice baths, metal containers, ice as an ingredient, pre-chilled ingredients, blast chiller, tumble-chill
unit, etc) facilitate the cooling of cooked / reheated foods or cooling TCS foods made from ambient ingredients.
OUT – Mark OUT when the cooling process IS observed but the METHODS / EQUIPMENT do NOT facilitate the
cooling of cooked / reheated foods or cooling TCS foods made from ambient ingredients.
C

NOTE: An IN or OUT marking of information statement C regarding cooling methods / equipment IS to be recorded
when the data collector has an opportunity observe the cooling methodology or process even though quantitative
measurements fail to provide definitive information as to the cooling rate of the food. The data collectors may use
statements from managers, the person-in-charge and food employees regarding cooling methods / equipment to
supplement their actual observations.
NO – Mark NO when the establishment does cool cooked / reheated foods or cools TCS foods made from ambient
ingredients, but no TCS foods are being cooled during the data collection
NA – Mark NA when the establishment does not cool cooked / reheated food or cool TCS food made from ambient
ingredients.

Mark IN / OUT when a cooling procedure or practice IS observed and not accurately described in the previous
information statements for this data item. If the “Other” information statement is marked IN or OUT, the data collector
MUST provide a description of the observation in the “Comment” section for the data item.
D

NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for the cooling of TCS foods are observed.
The NO marking is NOT used for the “Other” information statement.

7. Refrigerated, ready-to-eat foods are properly date marked and discarded within 7
days of preparation or opening

● Data collectors CANNOT select marking option that has been BLACKED-OUT for the above
information statement.
● NOTE: If date marking applies to the establishment, the person-in-charge should be asked to describe
the method(s) used to identify product shelf-life or “consume-by” dating. The data collector must be
aware of food products that are listed as exempt from date marking.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-501.17(A)(C)(D)Pf
IN – Mark IN when direct observations of food storage and handling practices verifies that there is a system in place for
date marking all ready-to-eat TCS foods prepared on-site and held for more than 24 hours as specified in Section 3501.17 of the Food Code

OUT – Mark OUT when direct observations of food storage and handling practices indicates that there is NOT a system
in place for date marking all ready-to-eat TCS foods prepared on site and held for more than 24 hours as specified in
Section 3-501.17 of the Food Code, OR direct observations indicate that ONE or MORE ready-to-eat TCS foods
prepared for more than 24 hours are NOT date marked.
NO – Mark NO when the establishment does prepare ready-to-eat TCS foods that require date marking, but there are no
foods requiring date marking being stored or processed at the time of the data collection.
NA – Mark NA when there are no ready-to-eat TCS foods prepared on site that are held for more than 24 hours.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-501.17(B – F)Pf
IN – Mark IN when direct observations of food storage and handling practices verifies that there is a system in place for
date marking all open commercial containers of ready-to-eat TCS foods held for more than 24 hours as specified in
Section 3-501.17 of the Food Code.

OUT – Mark OUT when direct observation of food storage and handling practices indicates that there is NOT a system
in place for date marking all open commercial containers of ready-to-eat TCS foods held for more than 24 hours as
specified in Section 3-501.17 of the Food Code, OR direct observations indicate that ONE or MORE open commercial
containers of ready-to-eat TCS foods held for more than 24 hours are NOT date marked.
NO – Mark NO when the establishment does serve ready-to-eat TCS foods from commercial containers but no
commercial containers of ready-to-eat foods are open and being held for more the 24 hours at the time of the data
collection.
NA – Mark NA when the establishment does not serve ready-to-eat foods from commercial containers.
FOOD CODE REFERENCES: 3-501.18(A)P
IN – Mark IN when direct observations of food storage and handling practices verify that all ready-to-eat TCS foods or
opened containers of RTE TCS Food are date marked as specified in Section 3-501.17 of the Food Code AND/OR are
observed being discarded within date marked time limits.

OUT – Mark OUT when direct observations of food storage and handling practices indicates that ONE or MORE
ready-to-eat TCS foods or open containers of RTE TCS Food EXCEEDS the time limit as specified in Section 3-501.17
of the Food Code.
NO – Mark NO when the establishment does serve ready-to-eat TCS food but there are no foods requiring date marking
being stored or processed at the time of the data collection.
NA – Mark NA when the establishment does not serve ready-to-eat TCS foods that are held for more than 24 hours.

Marked IN / OUT when a food procedure / practice related to date marking of ready-to-eat TCS foods held for more
than 24 hours IS observed and not accurately described in the previous information statements for this data item. If the
“Other” information statement is marked IN or OUT, the data collector MUST provide a description of the observation
in the “Comment” section for the data item.
D
NA – Mark NA when no additional food storage or handling practices to the ones presented in the previous information
statements for date marking ready-to-eat TCS foods held for more than 24 hours are observed.
The NO marking is NOT used for the “Other” information statement.

8. Raw animal foods are cooked to required temperatures

● Data collectors CANNOT select marking option that has been BLACKED-OUT for the above
information statement.
● NOTE: ALL observations MUST be based on actual final cook food product temperature
measurements using a calibrated food temperature measuring device. ALL food product temperatures
taken are to be recorded in the cooking temperature chart on the data collection form. If ONE product is
found to be out of temperature, the information statement is marked OUT of Compliance based on the
critical limit specified in the Food Code regardless of whether the establishment has a consumer
advisory that contains both a disclosure and reminder. If the data collector observes an actual food
product temperature that does NOT meet the specified critical limits in the Food Code (served
undercooked) but the establishment has developed, and applies correctly, a consumer advisory for that
food product, the actual food product temperature is marked OUT under this data item AND the data
collector records the required information for the food product in the cooking temperature chart
including checking the YES box under the consumer advisory.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-401.11(A)(1)(a) and (A)(2)P
IN – Mark IN when ALL product temperatures taken of raw shell eggs broken for immediate service are cooked to
145ºF for 15 seconds, AND/OR broken but not prepared for immediate service, are cooked to 155ºF for 15 seconds.
NOTE: This includes raw shell eggs that are used for baked goods / food products).
A

OUT – Mark OUT when ONE or MORE product temperatures taken of raw shell eggs broken for immediate service
AND/OR broken but not prepared for immediate serve, do NOT achieve the final cooking critical limits required in the
Food Code. NOTE: This includes raw shell eggs that are used for baked goods / food products).
NO – Mark NO when the establishment does cook raw shell eggs but none are cooked during the data collection.
NA – Mark NA when the establishment does not cook raw shell eggs.
FOOD CODE REFERENCE: 3-401.11(A)(1)(b)P; 3-401.11(C)(3)
IN – Mark IN when ALL product temperatures taken of Pork, or Fish, or Beef, or Commercially-raised Game Animals
are cooked to the required Food Code critical limit of 145ºF for 15 seconds. NOTE: Mark this information statement
IN if steaks from whole-muscle, intact beef are cooked on both the top and bottom to a surface temperature of 145ºF.
or above.

OUT – Mark OUT when ONE or MORE product temperatures taken of Pork, or Fish, or Beef, or Commerciallyraised Game Animals do NOT achieve the final cooking critical limits of 145ºF for 15 seconds. NOTE: Mark this
information statement OUT if steaks from whole-muscle, intact beef do NOT achieve the final cooking critical limits
on both the top and bottom surfaces of 145ºF. or above.
NO – Mark NO when the establishment does cook Pork, or Fish, or Beef, or Commercially-raised Game Animals but
none are cooked during the data collection.
NA – Mark NA when the establishment does not cook Pork, Fish, Beef, or Commercially-raised Game Animals.
FOOD CODE REFERENCES: 3-401.11(A)(2)P
IN – Mark IN when ALL product temperatures taken of COMMINUTED fish, or meat, or commercially raised game
animals are cooked to the required Food Code critical limit of 155ºF for 15 seconds.

OUT – Mark OUT when ONE or MORE product temperatures taken of COMMINUTED fish, or meat, or
commercially raised game animals, do NOT achieve the final cooking critical limit of 155ºF for 15 seconds.
NO – Mark NO when the establishment does cook COMMINUTED fish, or meat, or commercially raised game
animals, but none are cooked during the data collection.
NA – Mark NA when the establishment does not cook COMMINUTED fish, or meat, or commercially raised game
animals.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-401.11(A)(3)P
IN – Mark IN when ALL product temperatures taken of poultry; stuffed fish; stuffed meat; stuffed pasta; stuffed
poultry; stuffed ratites, or stuffing containing (fish; meat; poultry; or ratites), wild game animals are cooked to 165ºF
for 15 seconds.

OUT – Mark OUT when ONE or MORE product temperatures taken of poultry; stuffed fish; stuffed meat; stuffed
pasta; stuffed poultry; stuffed ratites; or stuffing containing (fish; meat; poultry; or ratites), wild game animals do NOT
achieve the final cooking critical limit of 165ºF for 15 seconds
NO – Mark NO when the establishment does cook poultry; stuffed fish; stuffed meat; stuffed pasta; stuffed poultry;
stuffed ratites, or stuffing containing (fish; meat; poultry; or ratites), or wild game animals but none are cooked during
the data collection.
NA – Mark NA when the establishment does not cook poultry; stuffed fish; stuffed meat; stuffed pasta; stuffed poultry;
stuffed ratites, or stuffing containing (fish; meat; poultry; or ratites) or wild game animals.
FOOD CODE REFERENCE: 3-401.11(B)P
IN – Mark IN when ALL product temperatures taken of roasts, including formed roasts, are cooked to 130ºF for 112
minutes or as Chart specified and according to oven parameters per Chart contained in the Food Code.

OUT – Mark OUT when ONE or MORE product temperatures taken of roasts, including formed roasts, do NOT
achieve the final cooking time-temperature critical limits required in the Food Code.
NO – Mark NO when the establishment does cook roasts, including formed roasts, but none are cooked during the data
collection.
NA – Mark NA when the establishment does not cook roasts, including formed roasts.
FOOD CODE REFERENCE: 3-401.14(D)P

Marked IN / OUT when a food procedure / practice related to cooking raw animal food IS observed and not accurately
described in the previous information statements for this data item. NOTE: Observations of cooking temperature
requirements for non-continuous cooking of raw animal foods as specified in Section 3-401.14(D) of the Food Code
are marked under the “Other” information statement. NOTE: Change in 2013 Food Code final cook temperatures
need to meet critical limits contained in Section 3-401.11 Raw Animal Foods. If the “Other” information statement is
marked IN or OUT, the data collector MUST provide a description of the observation in the “Comment” section for
the data item.
NO – Mark NO when establishment does non-continuous of raw animal foods but it IS not being conducted at the time
of the data collection.
NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for the cooking of raw animal foods are observed (including non-continuous cooking processes).

100

9. Cooked foods are reheated to required temperatures

● Data collectors CANNOT select marking option that has been BLACKED-OUT for the above
information statement.
● NOTE: ALL observations MUST be based on actual final reheat product temperature measurements
using a calibrated food temperature measuring device. ALL food product temperatures taken are to be
recorded in the reheating temperature chart on the data collection form. If ONE product is found to be
out of temperature, the information statement is marked OUT of Compliance based on the critical limit
specified in the Food Code.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-403.11(A)(D)P
IN – Mark IN when ALL product temperatures taken of reheated TCS food that is cooked and cooled on premise
achieves 165ºF for 15 seconds within 2 hours for hot holding.

OUT – Mark OUT when ONE or MORE product temperatures taken of reheated TCS food that is cooked and cooled
on premise, do NOT achieve 165ºF for 15 seconds within 2 hours for hot holding.
NO – Mark NO when the establishment does reheat for hot holding TCS food that is cooked and cooled on premise,
but none are reheated during the data collection.
NA – Mark NA when the establishment does not reheat for hot holding TCS food that is cooked and cooled on
premise.

101

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 3-403.11(C)(D)P
IN – Mark IN when ALL product temperatures taken of reheated commercially processed ready-to-eat foods from
intact packaging achieves 135ºF for hot holding.

OUT – Mark OUT when ONE or MORE product temperatures taken of reheated commercially processed ready-toeat foods from intact packaging do NOT achieve 135ºF for hot holding.
NO – Mark NO when the establishment does reheat commercially processed ready-to-eat foods from intact packaging
for hot holding, but none are reheated during the data collection.
NA – Mark NA when the establishment does not reheat commercially processed ready-to-eat foods from intact
packaging for hot holding.

Marked IN / OUT when a food procedure / practice related to reheating TCS foods IS observed and not accurately
described in the previous information statements for this data item. If the “Other” information statement is marked IN
or OUT, the data collector MUST provide a description of the observation in the “Comment” section for the data item.
C

NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for the reheating of TCS foods are observed.
The NO marking is NOT used for the “Other” information statement.

102

Other Areas of Interest (Items 11-19)
NOTE: This section will be used to observe data items that are not part of the primary research area for Retail
Food Risk Factor Study but may provide important information related to the primary 10 data items or that will
assist other food safety initiatives within the agency.

10.

Handwashing facilities are accessible and properly maintained

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item and information statements.
● NOTE: This data item is specific to ONLY handwashing facilities. Observations of food employees’
handwashing practices are to be marked under data item #1 – Employees practice proper
handwashing.

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 5-204.11Pf and 5-205.11(A)Pf
IN – Mark IN when handwashing sinks are convenient and accessible for use by food employees.
A

OUT – Mark OUT when ONE or MORE handwashing sinks are NOT convenient and/or accessible for use by food
employees. It is also marked OUT if handwashing facilities are blocked by portable equipment, or stacked full of dishes
or other items, or the handwashing sink is unavailable for regular employee use.
This information statement CANNOT be marked NO or NA.
FOOD CODE REFERENCES: 6-301.11Pf and 6-301.12Pf
NOTE: The presence of handwashing signage or waste receptacles is NOT part of the assessment of this information
statement.

IN – Mark IN when handwashing sinks are supplied with hand cleanser and disposable towels or hand drying devices
as specified in the Food Code.
OUT – Mark OUT when ONE or MORE handwashing sinks are NOT supplied with hand cleanser and/or disposable
towels / hand drying devices as specified in the Food Code.
This information statement CANNOT be marked NO or NA

103

11.

Employees practice good hygiene

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item and information statements.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 2-401.11C
IN – Mark IN when food employees eat, drink, and use tobacco ONLY in designated areas.

OUT – Mark OUT when ONE or MORE food employees are observed improperly tasting food; eating, drinking, or
smoking, or there is supporting evidence of these activities taking place in non-designated areas of the establishment.
NOTE: An open container of liquid in the kitchen preparation area does not necessarily result in an OUT marking for
this information statement. The data collector should have further discussion with food employees or the person-incharge to determine what the liquid is and its intended use.
This information statement CANNOT be marked NO or NA.
FOOD CODE REFERENCE: 2-401.12C
IN – Mark IN when no food employees are observed experiencing persistent sneezing, coughing, runny nose, or
watery eyes working with, or handling exposed food, clean equipment, utensils, linens, unwrapped single-service or
single-use articles.

B
OUT – Mark OUT when ONE or MORE food employees are observed having persistent sneezing, coughing, runny
nose, or watery eyes and are working with, or handling exposed food, clean equipment, utensils, linens, unwrapped
single-service or single-use articles.
This information statement CANNOT be marked NO or NA

Marked IN / OUT when an observation pertaining to a food employee hygienic practice IS not accurately described in
the previous information statements for this data item. If the “Other” information statement is marked IN or OUT, the
data collector MUST provide a description of the observation in the “Comment” section.
C

NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for employee hygienic practices are observed.
The NO marking is NOT used for the “Other” information statement.

104

12. Consumers are properly advised of risks of consuming raw or undercooked
animal foods

● Data item 13 does not contain any information statements. The language in the data item is intended to
be all encompassing of observations related to consumer advisories for animal foods that are served raw
or undercooked
● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item.
FOOD CODE REFERENCE: 3-603.11Pf
IN – Mark IN when the establishment provides a consumer advisory that meets the disclosure and reminder
requirements as specified in Section 3-603.11 of the Food Code for ALL animal foods, such as untreated eggs,
beef,, meats, fish, lamb, milk, or poultry, or shellfish that are served raw or undercooked without otherwise
being processed to eliminate pathogens either in ready-to-eat form or as an ingredient in ready-to-eat food.
OUT – Mark OUT when the establishment does NOT provide a consumer advisory OR provides a consumer
advisory that does NOT meet the disclosure and reminder requirements as specified in Section 3-603.11 of the
Food Code for ONE or MORE animal foods, such as eggs, beef,, fish, lamb, milk, poultry, or shellfish that are
served raw, undercooked, or without otherwise being processed to eliminate pathogens either in ready-to-eat
form or as an ingredient in ready-to-eat food.
NO – This information statement CANNOT be marked NO.
NA – Mark NA when the establishment does NOT serve raw animal food or animal food that is PARTIALLY
COOKED or UNDERCOOKED.

105

13.

Time alone is properly used as a public health control

● Data collectors CANNOT select marking option that has been BLACKED-OUT for the above
information statement.
● NOTE: Marking this item MUST be based on direct observations, record review, discussion with food
employee, and review of any standard operating procedures. This data item is only applicable if it is the
actual intention or conscious decision by the person-in-charge / food employees to store TCS Food out
of temperature control using time as a public health control, otherwise it should be addressed as a hot or
cold holding observation.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-501.19(A)Pf(B)P
IN – Mark IN when there is a WRITTEN procedure at the food establishment that identifies the types of food
products that will be held using time only, describes the procedure for how time as a public health control will be
implemented, and ALL food items marked or identified for time as a public health control DO NOT EXCEED the 4HOUR limit.

OUT – Mark OUT when ONE or MORE food items marked or identified for time as a public health control
EXCEED the 4-HOUR limit. In addition, this information statement is marked OUT if the food is not marked or
identified. This information statement is also marked OUT when ALL food items marked or identified for time as a
public health control DO NOT EXCEED the 4-HOUR limit BUT there is NO written procedure OR the written
procedure for using time only does NOT meet the requirements specified in Section 3-501.19 of the Food Code.
NO – Mark NO when the establishment uses a 4-HOUR time only critical limit as a public health control, but time as a
public health control is not used during the data collection.
NA – Mark NA when the establishment does not use a 4-HOUR time only critical limit as a public health control.

106

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-501.19(A)Pf(C)(1)P(2)Pf(3)Pf(4)P(5)P
IN – Mark IN when there is a WRITTEN procedure at the food establishment that identifies the types of food
products that will be held using time only, describes the procedure for how time as a public health control will be
implemented, and ALL food items marked or identified for time as a public health control DO NOT EXCEED the 6HOUR limit.

OUT – Mark OUT when ONE or MORE food items marked or identified for time as a public health control
EXCEED the 6-HOUR limit. In addition, this information statement is marked OUT if the food is not marked or
identified. This information statement is also marked OUT when ALL food items marked or identified for time as a
public health control DO NOT EXCEED the 6-HOUR limit BUT there is NO written procedure OR the written
procedure for using time only does NOT meet the requirements specified in Section 3-501.19 of the Food Code.
NO – Mark NO when the establishment uses a 6-HOUR time only critical limit as a public health control, but time as a
public health control is not used during the data collection.
NA – Mark NA when the establishment does not use a 6-HOUR time only critical limit as a public health control.

Marked IN / OUT when an observation pertaining to the use of time only as a public health control IS not accurately
described in the previous information statements for this data item. If the “Other” information statement is marked IN
or OUT, the data collector MUST provide a description of the observation in the Comment section.
C

NA – Mark NA when no additional food procedures or practices to the ones presented in the previous information
statements for time only as a public health control are observed.
The NO marking is NOT used for the “Other” information statement.

107

14. Facilities have adequate equipment and tools for ensuring food temperature
control and sanitization of food contact surfaces

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the
above data item and information statements.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 4-301.11Pf
IN – Mark IN when enough refrigeration / cold holding EQUIPMENT with sufficient capacity is available to maintain
TCS Food at 41ºF or below.
A
OUT – Mark OUT when there is NOT enough refrigeration / cold holding EQUIPMENT with sufficient capacity to
maintain TCS Food at 41ºF or below.
This information statement CANNOT be marked NO or NA.
FOOD CODE REFERENCE: 4-301.11Pf
IN – Mark IN when enough hot holding EQUIPMENT with sufficient capacity is available to maintain TCS Food at
135ºF or above.
B

OUT – Mark OUT when there is NOT enough hot holding EQUIPMENT with sufficient capacity to maintain TCS
Food at 135ºF or above.
NO – Mark NO when the establishment does hot hold foods, but no foods are being held hot during the data collection.
NA – Mark NA when the establishment does NOT hot hold food.

108

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 4-203.12Pf; 4-204.112C
IN – Mark IN when refrigeration and / or hot storage units are equipped with accurate AMBIENT AIR
TEMPERATURE MEASURING devices.
C
OUT – Mark OUT when refrigeration and / or hot storage unit are NOT equipped with accurate AMBIENT AIR
TEMPERATURE MEASURING devices.
This information statement CANNOT be marked NO or NA.
FOOD CODE REFERENCES: 4-203.11Pf; 4-302.12(A)Pf(B)Pf; 4-502.11(B)Pf
IN – Mark IN when an ACCURATE TEMPERATURE MEASURING DEVICE, with appropriate probe IS
provided and accessible for use to measure INTERNAL FOOD TEMPERATURES.
D
OUT – Mark OUT when an ACCURATE TEMPERATURE MEASURING DEVICE, with appropriate probe IS
NOT provided and accessible to measure INTERNAL FOOD TEMPERATURES.
This information statement CANNOT be marked NO or NA.
FOOD CODE REFERENCES: 4-302.13C 4-302.14Pf; 4-703.11(B)Pf
IN – Mark IN when an ACCURATE TEMPERATURE MEASURING DEVICE and/or TEST KITS are provided
and accessible to measure SANITIZING RINSE TEMPERATURES or SANITIZING CONCENTRATIONS.
E

OUT – Mark OUT when an ACCURATE TEMPERATURE MEASURING DEVICE and/or TEST KITS are NOT
provided and accessible to measure SANITIZING RINSE TEMPERATURES or SANITIZING
CONCENTRATIONS.
This information statement CANNOT be marked NO or NA.

Marked IN / OUT when an observation pertaining to equipment and tools for maintaining and measuring proper
temperature IS not accurately described in the previous information statements for this data item. If the “Other”
information statement is marked IN or OUT, the data collector MUST provide a description of the observation in the
“Comment” section.
F
NA – Mark NA when no additional observations to the ones presented in the previous information statements are noted
for equipment and tools for maintaining and measuring proper temperature.
The NO marking is NOT used for the “Other” information statement.

109

15. Special processes are conducted in compliance with issued variance / HACCP
Plan, when required

● Data collectors CANNOT select marking option that has been BLACKED-OUT for the above
information statement.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-502.12P,Pf; 8-201.13(B)C; 8-201.14(A-F)Pf
IN – Mark IN when direct observations of REDUCED OXYGEN PACKAGING processes permitted WITHOUT a
VARIANCE (including cook chill, sous vide, or vacuum packaging) indicate they are conducted in accordance with
the required HACCP Plan and MEET the specific critical limits required in Section 3-502.12 of the Food Code.
NOTE: This includes observations of ROP foods being held under refrigeration AND labeling and record information
associated with those refrigerated ROP foods.

OUT – Mark OUT when direct observations of REDUCED OXYGEN PACKAGING processes permitted
WITHOUT A VARIANCE (including cook chill, sous vide, or vacuum packaging) indicate they are NOT conducted
in accordance with the required HACCP Plan or DO NOT MEET the specific critical limits required in Section 3502.12 of the Food Code. NOTE: This includes observations of ROP foods being held under refrigeration AND
labeling and record information associated with those refrigerated ROP foods.
NO – Mark NO when the establishment does reduced oxygen packaging without a variance, but no ROP foods are
being processed OR observed at the time of the data collection and no ROP products are available.
NA – Mark NA when the establishment does not conduct reduced oxygen packaging OR only conducts ROP processes
that require a variance.

110

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-502.11Pf; 8-103.12P,Pf; 8-201.14(A-F)Pf
IN – Mark IN when direct observations of SPECIAL PROCESSES (including smoking food, curing food, using food
additives to render a food so it is not a TCS Food, and reduced oxygen packaging processes that REQUIRE A
VARIANCE) indicate they are CONDUCTED IN ACCORDANCE with the approved variance and required
HACCP Plan (including adherence to all critical limits, product labeling, and record keeping requirements). NOTE:
Special Processes for this information statement DOES NOT include juice packaged in a food establishment which is
addressed in information statement 16C.

OUT – Mark OUT when direct observations of SPECIAL PROCESSES (including smoking food, curing food, using
food additives to render a food so it is not a TCS Food, and reduced oxygen packaging processes that REQUIRE A
VARIANCE) indicate they ARE NOT CONDUCTED IN ACCORDANCE with the approved variance and required
HACCP Plan (including adherence to all critical limits, product labeling, and record keeping requirements). NOTE:
Special Processes for this information statement DOES NOT include juice packaged in a food establishment which is
addressed in information statement 16C.
NO – Mark NO when the establishment does special processes as described under this information statement, but no
specialized processes are being conducted OR no foods prepare using a special process are observed at the time of the
data collection and no special process products are available.
NA – Mark NA when the establishment does not conduct special processes as described under this information
statement.
FOOD CODE REFERENCE: 3-404.11P, Pf; 8-201.14(A-F)Pf
IN – Mark IN when direct observations of JUICE BEING PACKAGED OR that HAS BEEN PACKAGED in the
food establishment indicate the process IS conducted in accordance with a HACCP Plan that attains a 5-log reduction
of the most resistant pathogen OR IS labeled as required in Section 3-404.11 of the Food Code.

OUT – Mark OUT when direct observations of JUICE BEING PACKAGED OR that HAS BEEN PACKAGED in
the food establishment indicate the process IS NOT conducted in accordance with a HACCP Plan that attains a 5-log
reduction of the most resistant pathogen OR IS NOT labeled as required in Section 3-404.11 of the Food Code.
NO – Mark NO when the establishment does PACKAGE JUICE, but no juice is being packaged OR no juice that has
been packaged in the establishment is present at the time of the data collection.
NA – Mark NA when the establishment does not package juice.

Marked IN / OUT when an observation pertaining to reduced oxygen packaging or special processes or juice
packaging IS NOT accurately described in the previous information statements for this data item. If the “Other”
information statement is marked IN or OUT, the data collector MUST provide a description of the observation in the
“Comment” section, such as a Molluscan Shellfish Tank used to store or display shellfish for human consumption.
D
NA – Mark NA when no additional observations to the ones presented in the previous information statements are noted
for reduced oxygen packaging or special processes or juice packaging.
The NO marking is NOT used for the “Other” information statement.

111

16.

Food is received from safe sources

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item and information statements.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-201.11P,Pf; 3-201.12P; 3-201.13P; 3-201.14P; 3-202.12P; 3-202.13P;
3-202.14P; 3-202.110P, Pf; 5-101.13P

IN – Mark IN when direct observations determine that food is obtained from approved food sources. A review of
supplier names, shipment invoices, buyer specifications, proof of regulatory permit/licensure of food source, etc., can be
used to document approved food sources. Milk and milk products comply with Grade A Standards.
OUT – Mark OUT when direct observations determine that food is NOT obtained from approved food sources OR milk
and milk products do NOT comply with Grade A Standards.
This information statement CANNOT be marked NO or NA.
FOOD CODE REFERENCE: 3-201.15P
IN – Mark IN when direct observations determine that molluscan shellfish are obtained from approved food sources. A
review of the ICSSL listed sources, molluscan shellfish tags, supplier’s names, shipment invoices, proof of regulatory
permit/licensure of food source, buyer specification, etc., can be used to determine approved food source.

OUT – Mark OUT when direct observations determine that molluscan shellfish are NOT obtained from approved food
sources.
NO – Mark NO when molluscan shellfish are sold periodically in the establishment but are not being sold at the time of
the data collection.
NA – Mark NA when molluscan shellfish are not used/offered as a menu item within the establishment.

112

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-101.11P; 3-202.15Pf
NOTE: This information statement is specific to observations made of food as it is received from the supplier

IN – Mark IN when direct observations determine that food is protected from environmental contamination during
transport and receiving. Observations can be based on the integrity of product packaging and/or an assessment of the
environmental conditions within transportation vehicles at the time of receipt.
OUT – Mark OUT when direct observations determine that food is NOT protected from environmental contamination
during transport and receiving.
NO – Mark NO when food is not received by the establishment during the data collection
This information statement CANNOT be marked NA
FOOD CODE REFERENCE: 3-202.11P, Pf
NOTE: This information statement MUST be based on actual food product temperature measurements of TCS food
being RECEIVED.

IN – Mark IN when direct observations of actual food product temperature measurements determine that food is
RECEIVED at proper temperatures during the data collection.
OUT – Mark OUT when direct observations of actual food product temperature measurements determine that ONE or
MORE food products are NOT RECEIVED at proper temperature.
NO – Mark NO if food is not received during the data collection.
This information statement CANNOT be marked NA
FOOD CODE REFERENCE: 3-101.11P
NOTE: This information statement applies to observations of the wholesomeness of food from receiving through
service and is NOT restricted to only receiving of foods.

IN – Mark IN when direct observations determine that all food products are wholesome AND/OR show no signs of
adulteration.
OUT – Mark OUT when direct observations determine that food products are NOT wholesome AND/OR indicate
signs of adulteration.
This information statement CANNOT be marked NO or NA.

113

INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 3-202.18(A)Pf; 3-203.12Pf
IN – Mark IN when direct observations of shellstock tags indicates that ALL required information as specified in
Section 3-202.18 of the Food Code is present and shellstock tags are retained for 90 days and filed in chronological
order and in conformance with Section 3-203.12 of the Food Code.

OUT – Mark OUT when no shellstock tags are available for shellfish used or sold in the establishment within the past
90 days AND/OR the information on the shellstock tags does NOT contain the required information as specified in
Section 3-202.18 of the Food Code. In addition, the information statement is marked OUT if the establishment is not
in compliance with Section 3-203.12 of the Food Code OR there is evidence indicates commingling of shellstock.
NO – Mark NO when shellstock are sold periodically in the establishment but are not being sold at the time of the data
collection and have not been sold or used within the establishment within the past 90 days.
NA – Mark NA when shellstock are not used/sold in the establishment.
FOOD CODE REFERENCES: 3-402.11P; 3-402.12Pf
IN – Mark IN when direct observations determine that fish products intended for raw or undercooked consumption
have been frozen in accordance with the time and temperature requirements specified in Section 3-402.11 of the Food
Code. Observations are to be supported by documentation from the supplier identifying that fish sold as raw, raw
marinated, or undercooked is frozen by the supplier for parasite destruction AND/OR there are records maintained by
the permit holder documenting the time and temperature critical limits when fish are frozen at the establishment.

OUT – Mark OUT when direct observations determine that ONE or MORE fish products intended for raw or
undercooked consumption have NOT been frozen in accordance with the time and temperature requirement specified
in Section 3-402.11 of the Food Code OR no documentation is available at the time of the data collection verifying
that fish sold as raw, raw marinated, or undercooked has been frozen for parasite destruction.
NO – Mark NO if fish products intended for raw or undercooked consumption are sold periodically in the
establishment, but are not being sold or used at the time of the data collection.
NA – Mark NA if fish products intended for raw or undercooked consumption are not sold or used in the
establishment.

Marked IN / OUT when an observation pertaining to an approved food source IS NOT accurately described in the
previous information statements for this data item. If the “Other” information statement is marked IN or OUT, the data
collector MUST provide a description of the observation in the “Comment” section.
H

NA – Mark NA when no additional observations to the ones presented in the previous information statements are noted
for approved food sources.
The NO marking is NOT used for the “Other” information statement.

114

17.

Toxic materials are identified, used, and stored properly

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item and information statements.
● NOTE: This item will require some judgment to be used when marking the information statements IN
or OUT of compliance. The information statement should be marked OUT of compliance if
observations are made that support a pattern of non-compliance with the procedure or practice. One
unlabeled cleaning agent bottle would not necessarily support an OUT of Compliance marking. The
data collector MUST complete the comment section when an OUT of Compliance marking is
documented for one or more of the information statements.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCES: 7-101.11Pf; 7-102.11Pf; 7-201.11P; 7-202.11Pf; 7-202.12P, Pf; 7-203.11P; 7-204.11P; 7204.12P, C; 7-204.13P; 7-204.14P; 7-205.11P; 7-206.11P; 7-206.12P; 7-206.13P, C; 7-207.11P, Pf; 7-207.12P; 7-208.11P,
Pf
; 7-209.11C

IN – Mark IN when direct observations determine that bulk and working containers of cleaning agents and sanitizers
are labeled; sanitizing solutions are NOT exceeding the maximum concentrations; personal care items, first aid
supplies, medicines, and chemicals are stored separate from and NOT above food, equipment, utensils, linens, and
single-use articles; and restricted use pesticides are applied only by or under the supervision of a certified applicator.
OUT – Based on an overall assessment of the establishment’s operation, mark OUT when direct observations indicate
a substantive pattern of unlabeled containers of cleaning agents and/or sanitizers. In addition, this information
statement is marked out if there is NOT adequate separation of chemicals and medicines from food, equipment,
utensils, linens and single-use articles. Mark Out when sanitizer solution exceeds maximum concentration or if
medicines and first aid kits are improperly label and/or stored.
This information statement CANNOT be marked NO or NA

Marked IN / OUT when an observation pertaining to the labeling, use, or storage of toxic materials IS NOT accurately
described in the previous information statements for this data item. If the “Other” information statement is marked IN
or OUT, the data collector MUST provide a description of the observation in the “Comment” section.
B

NA – Mark NA when no additional observations to the ones presented in the previous information statements are noted
for the labeling, use, or storage of toxic materials.
The NO marking is NOT used for the “Other” information statement.

115

18. Management and food employees are trained in food allergy awareness as it
relates to their assigned duties

● Data collectors CANNOT select marking options that have been BLACKED-OUT for the above data
item and information statements.
● NOTE: Data collector should be aware of the 8 major food allergens including : Milk; Egg; Fish (such
as bass, flounder, or cod); Crustacean shellfish (such as crab, lobster, or shrimp); Tree nuts (such as
almonds, pecans, or walnuts): Wheat; Peanuts; and Soybeans
● NOTE: Data collector should be aware of the symptoms associated with a food allergic response
including: hives or other itchy rashes; nausea; abdominal pain; vomiting and/or diarrhea; wheezing;
shortness of breath; and swelling of various parts of the body. In severe cases, anaphylactic shock and
death may result.
INFO
ITEM

MARKING INSTRUCTIONS

FOOD CODE REFERENCE: 2-102.11(C)(9)Pf
IN – Mark IN when the person-in-charge provides responses to questions that demonstrate knowledge of the 8 major
food allergens and symptoms associated with the major food allergens.
A
OUT – Mark OUT when the person-in-charge does NOT provide responses to questions that demonstrate knowledge
of the 8 major food allergens and symptoms associated with the major food allergens
This information statement CANNOT be marked NO or NA.
FOOD CODE REFERENCE: 2-103.11(N)Pf

IN – Mark IN when the person-in-charge provides a description of the food employee allergen training program that
covers the 8 major allergens as they related to the employees assigned duties and symptoms associated with the major
food allergens. The training program can be verbal or written.
OUT – Mark OUT when a food employee allergen training program is NOT provided or does NOT address food
allergy awareness as it related to food employees assigned duties.
This information statement CANNOT be marked NO or NA.

116

INFO
ITEM

MARKING INSTRUCTIONS

Marked IN / OUT when an observation pertaining to food allergy awareness IS NOT accurately described in the
previous information statements for this data item. If the “Other” information statement is marked IN or OUT, the data
collector MUST provide a description of the observation in the “Comment” section.
C

NA – Mark NA when no additional observations to the ones presented in the previous information statements are noted
for food allergy awareness.
The NO marking is NOT used for the “Other” information statement.

117

This page intentionally left blank.

118

XI. Food Code Reference Sheet
1. Employees practice proper handwashing (Deleted Reference to Info Statement 1C)
Info
Statement

Food Code Reference(s)

2-301.12P – Cleaning Procedure

2-301.14(A-I)P – When to Wash

2. Employees do not contact ready-to-eat foods with bare hands
Food Code Reference(s)
3-301.11(B)P – Preventing Contamination from Hands

3. Food is protected from cross-contamination during storage, preparation, and
display
Info
Statement

119

Food Code Reference(s)

3-302.11(A)(1)P – Packaged and Unpackaged Food – Separation, Packaging, and Segregation

3-302.11(A)(2)P – Packaged and Unpackaged Food – Separation, Packaging, and Segregation

3-302.11(A)(4-8)C – Packaged and Unpackaged Food – Separation, Packaging, and Segregation
3-304.11(B)P – Food Contact with Equipment and Utensils
3-304.15(A)P – Gloves, Use Limitation
3-306.13(A)P – Consumer Self-Service Operations

Other Priority Item as Identified by Data Collector

4. Food contact surfaces are properly cleaned and sanitized
Info
Statement

120

Food Code Reference(s)
NOTE: Specific to observations of cleaned and sanitized food contact dishware, utensils,
cookware that have been stored and that are considered ready-for-use.
4-601.11(A)Pf(B)C – Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and
Utensils
4-602.11P&C – Equipment Food-Contact Surfaces and Utensils
4-602.12C – Cooking and Baking Equipment
4-702.11P – Before Use After Cleaning

NOTE: Specific to observations of food contact surfaces and utensils as part of a manual
warewashing or clean-in-place procedure
4-303.11PF – Cleaning Agents and Sanitizers, Availability (as it applies to observations of
manual warewashing or clean-in-place procedures)
4-501.111P – Manual Warewashing Equipment, Hot Water Sanitization Temperatures
4-501.114P – Manual and Mechanical Warewashing Equipment, Chemical Sanitization –
Temperature, pH, Concentration, and Hardness
4-501.115C – Manual Warewashing Equipment, Chemical Sanitization Using DetergentSanitizers
4-703.11(A), (B), and (C)P – Hot Water and Chemical

NOTE: Specific to observations of food contact surfaces and utensils as part of a mechanical
warewashing procedure
4-303.11PF – Cleaning Agents and Sanitizers, Availability (as it applies to observations of
mechanical warewashing or procedures)
4-501.113C – Mechanical Warewashing Equipment, Sanitization Pressure
4-501.114P – Manual and Mechanical Warewashing Equipment, Chemical Sanitization –
Temperature, pH, Concentration, and Hardness
4-703.11(B) and (C)P – Hot Water and Chemical

Other Priority Item as Identified by Data Collector

5. Foods requiring refrigeration are held at the proper temperature
Info
Statement

Food Code Reference(s)

3-501.16(A)(2)P – Potentially Hazardous Food (Time/Temperature Control for Safety Food),
Hot and Cold Holding

3-501.16(B)P – Potentially Hazardous Food (Time/Temperature Control for Safety Food), Hot
and Cold Holding

Other Priority Item as Identified by Data Collector

6. Foods displayed or stored hot are held at the proper temperature
Info
Statement

Food Code Reference(s)

3-501.16(A)(1)P – Potentially Hazardous Food (Time/Temperature Control for Safety Food),
Hot and Cold Holding

Other Priority Item as Identified by Data Collector

7. Foods are cooled properly
Info
Statement

Food Code Reference(s)

3-501.14(A)P – Cooling

3-501.14(B)P – Cooling

3-501.15(A)PF and (B)C – Cooling Methods; 4-301.11Pf – Cooling, Heating, and Holding
Capacities

Other Priority Item as Identified by Data Collector

8. Refrigerated, ready-to-eat foods are properly date marked and discarded within 7
days of preparation or opening
Info
Statement

121

Food Code Reference(s)

3-501.17(A)(C)(D)(E)Pf – Ready-to-Eat, Potentially Hazardous Food (Time/Temperature
Control for Safety Food), Date Marking

3-501.17(A – F)Pf – Ready-to-Eat, Potentially Hazardous Food (Time/Temperature Control for
Safety Food), Date Marking

3-501.18(A)P – Ready-to-Eat, Potentially Hazardous Food (Time/Temperature Control for
Safety Food), Disposition

Other Priority Item as Identified by Data Collector

9. Raw animal foods are cooked to required temperatures
Info
Statement

10.

Food Code Reference(s)

3-401.11(A)(1)(a) and (A)(2)P – Raw Animal Foods

3-401.11(A)(1)(b)P and 3-401.11(C)(3) – Raw Animal Foods

3-401.11(A)(2)P – Raw Animal Foods

3-401.11(A)(3)P – Raw Animal Foods

3-401.11(B)P – Raw Animal Foods

Other Priority Item as Identified by Data Collector NOTE: Observations of actual final
temperatures pertaining to non-continuous cooking of raw animal foods as specified in Section
3-401.14(D) of the Food Code are recorded as part of the “Other” information statement.

Cooked foods are reheated to required temperatures

Info
Statement

11.

Food Code Reference(s)

3-403.11(A)(D)P – Reheating for Hot Holding

3-403.11(C)(D)P – Reheating for Hot Holding

Other Priority Item as Identified by Data Collector

Handwashing facilities are accessible and properly maintained

Info
Statement

12.

5-204.11Pf – Handwashing Sinks
5-205.11(A)Pf – Using a Handwashing Sink

6-301.11Pf – Handwashing Cleanser, Availability
6-301.12PF – Hand Drying Provision

Employees practice good hygiene

Info
Statement

122

Food Code Reference(s)

2-401.11C – Eating, Drinking, or Using Tobacco

2-401.12C – Discharges from the Eyes, Nose, and Mouth

Other Priority Item as Identified by Data Collector

13. Consumers are properly advised of risks of consuming raw or undercooked
animal foods
Food Code Reference(s)
Pf

3-603.11 – Consumption of Animal Food that are Raw, Undercooked, or Not Otherwise Processed to
Eliminate Pathogens

14.

Time alone is properly used as a public health control

Info
Statement
A
B
C

Food Code Reference(s)
3-501.19(A)Pf(B)P – Time as a Public Health Control
3-501.19(A)Pf(C)(1)P(2)Pf(3)Pf(4)P(5)P – Time as a Public Health Control
Other Priority Item as Identified by Data Collector

15. Facilities have adequate equipment and tools for ensuring food temperature
control and sanitization of food contact surfaces
Info
Statement

123

Food Code Reference(s)

4-301.11Pf – Cooling, Heating, and Holding Capacities

4-203.12Pf – Temperature Measuring Devices, Ambient Air and Water
4-204.112C – Temperature Measuring Devices

4-203.11Pf – Temperature Measuring Devices, Food
4-302.12(A)Pf(B)Pf – Food Temperature Measuring Devices
4-502.11(B)Pf – Good Repair and Calibration

4-302.13C – Temperature Measuring Devices, Manual Warewashing
4-302.14Pf – Sanitizing Solutions, Testing Devices
4-703.11(B)P – Hot Water and Chemical

Other Priority Item as Identified by Data Collector

16. Special processes are conducted in compliance with issued variance / HACCP
Plan when required
Info
Statement

17.

Food Code Reference(s)

3-502.12P,Pf – Reduced Oxygen Packaging Without a Variance
8-201.13(B)C – When a HACCP Plan is Required
8-201.14(A-F)Pf – Contents of a HACCP Plan

3-502.11PF – Variance Requirement
8-103.12P,PF – Conformance with Approved Procedures
8-201.14(A-F)Pf – Contents of a HACCP Plan

3-404.11P,Pf – Treating Juice
8-201.14(A-F)Pf – Contents of a HACCP Plan

Other Priority Item as Identified by Data Collector

Food is received from safe sources

Info
Statement

124

Food Code Reference(s)

3-201.11P,Pf – Compliance with Food Law
3-201.12P – Food in Hermetically Sealed Container
3-201.13P – Fluid Milk and Milk Products
3-201.14P – Fish
3-202.12P – Additives
3-202.13P – Eggs
3-202.14P – Eggs and Milk Products, Pasteurized
3-202.110P,Pf – Juice Treated
5-101.11P – Approved System
5-101.13P – Bottled Drinking Water

3-201.15P – Molluscan Shellfish

3-101.11P – Safe, Unadulterated, and Honestly Presented
3-202.15Pf – Package Integrity

3-202.11P,Pf – Temperature

3-101.11P – Safe, Unadulterated and Honestly Presented

3-202.18(A)Pf – Shellstock Identification
3-203.12Pf – Shellstock, Maintaining Identification

Info
Statement

18.

3-402.11P – Parasite Destruction
3-402.12Pf – Records, Creation and Retention

Other Priority Item as Identified by Data Collector

Toxic materials are identified, used, and stored properly

Info
Statement

125

Food Code Reference(s)

7-101.11Pf – Identifying Information, Prominence
7-102.11Pf – Common Name
7-201.11Pf – Separation
7-202.11Pf – Restriction
7-202.12P,Pf – Conditions of Use
7-203.11P – Poisonous or Toxic Material Containers
7-204.11P –Sanitizers, Criteria
7-204.12P,C – Chemicals for Washing, Treatment, Storage and Processing Fruits and
Vegetables, Criteria
7-204.13P – Boiler Water Additives, Criteria
7-204.14P – Drying Agents, Criteria
7-205.11P – Incidental Food Contact, Criteria
7-206.11P – Restricted Use Pesticides, Criteria
7-206.12P – Rodent Bait Stations
7-206.13P,C – Tracking Powders, Pest Control and Monitoring
7-207.11P,Pf – Restriction and Storage
7-207.12P – Refrigerated Medicines, Storage
7-208.11P,Pf – Storage
7-209.11C - Storage
Other Priority Item as Identified by Data Collector

19. Management and food employees are trained in food allergy awareness as it
relates to their assigned duties
Info
Statement

126

Food Code Reference(s)

2-102.11(C)(9)Pf – Demonstration

2-103.11(N)Pf – Person in Charge

Other Priority Item as Identified by Data Collector

Attachment A: Instructions for Conducting the Food
Safety Management System Assessment (Poor
Personal Hygiene Risk Factor)
If the Poor Personal Hygiene risk factor has been randomly selected within a facility for conducting a food
safety management system assessment, the data collector will complete a separate Procedure; Training; and
Monitoring (PTM) assessment for the following two data items from the data collection form:
Poor Personal Hygiene Risk Factor
1. Employees practice proper handwashing
2. Food employees do not contact ready-to-eat foods with bare hands
The data collector should complete the assessment tools provided at the end of these instructions prior to
marking the rating scale 1 – 4 on the data collection form for each of three food safety management system
assessment areas (Procedures; Training; Monitoring).

Using the Food Safety Management System Assessment Tool
For each of the two data items listed above, the data collector will individually assess each of the three food
safety management system elements (Procedures, Training, and Monitoring).
Using an effective interview process the data collector will solicit sufficient information from the PIC to
respond “YES” or “NO” to the four statements listed under each of the PTM elements.
NOTE: Data collectors are strongly encouraged to use a conversational approach to obtain information from
the person in charge on their food safety management system rather than using the tool to drive questions in the
order the statements appear.
Using the information gathered from the interview, the data collector will answer each of the first three
statements under the food safety management system element (PTM) either “YES” or “NO”. Each of the three
statements is to be answered independently of one another.
For example, the person in charge describes handwashing procedures that include critical limits that do not meet
minimum requirements for controlling hazards of concern. However, the PIC is able to provide a sound
management structure for how and when handwashing is done in the facility and who is responsible for
following the procedures. Under the procedures section, therefore, the data collector would record NO for
statement #1 related to critical limits but YES to statements #2 (how and when) and #3 (who is assigned to
correctly perform the procedure).
After marking the first three statements, the data collector will review the responses. If ALL three statements
are marked “YES”, the data collector will then mark a response “YES” or “NO” to the last question in the
shaded row. The fourth question in the shaded row is designed to assess whether there are written materials
available to support the PTM element.
127

If any of the first three statements have been marked “NO” the data collector does not enter a response for the
shaded statement. The first three statements MUST be marked “YES” for the data collector to enter a response
for the fourth statement.

Using the Results of the Assessment Tool to Rate PTM on the Data Collection Form
Using the Assessment Tool, the data collector will add up the total number of YES responses for each of the
management system elements (PTM). The number of “YES” responses on the assessment tool will determine
how to mark the Procedures, Training, and Monitoring sections for the data item on the data collection form.
•
•
•
•

If the number of “YES” responses is “0” or “1”, mark the data collection form “1” for that
management system (PTM) element;
If the number of “YES” responses is “2”, mark the data collection form “2” for that management
system (PTM) element;
If the number of “YES” responses is “3”, mark the data collection form “3” for that management
system (PTM) element; and
IF the number of “YES” responses is “4”, mark the data collection form “4” for that management
System (PTM) element.

In the “COMMENT” section of the data collection form, provide a description of any scenarios that presented
some challenges to assigning a 1-4 marking for a management system (PTM) element.

128

HANDWASHING

129

HANDWASHING

130

NO BARE HAND CONTACT WITH RTE FOOD

131

NO BARE HAND CONTACT WITH RTE FOOD

132

Attachment B: Instructions for Conducting the Food
Safety Management System Assessment
(Contaminated Equipment / Protection from
Contamination Risk Factor)
If the Contaminated Equipment / Protecting from Contamination risk factor has been randomly selected within
a facility for conducting a food safety management system assessment, the data collector will complete a
separate Procedure; Training; and Monitoring (PTM) assessment for the following two data items from the data
collection form:
Contaminated Equipment / Protection from Contamination Risk Factor
3. Food is protected from cross-contamination during storage, preparation, and display
4. Food contact surfaces are properly cleaned and sanitized
The data collector should complete the assessment tools provided at the end of these instructions prior to
marking the rating scale 1 – 4 on the data collection form for each of three food safety management system
assessment areas (Procedures; Training; Monitoring).

Using the Food Safety Management System Assessment Tool
For each of the two data items listed above, the data collector will individually assess each of the three food
safety management system elements (Procedures, Training, and Monitoring).
Using an effective interview process the data collector will solicit sufficient information from the PIC to
respond “YES” or “NO” to the four statements listed under each of the PTM elements.
NOTE: Data collectors are strongly encouraged to use a conversational approach to obtain information from
the person in charge on their food safety management system rather than using the tool to drive questions in the
order the statements appear.
Using the information gathered from the interview, the data collector will answer each of the first three
statements under the food safety management system element (PTM) either “YES” or “NO”. Each of the three
statements is to be answered independently of one another.
For example, the person in charge describes cleaning and sanitizing procedures that include sanitizer
concentrations (critical limits) that do not meet minimum requirements for controlling hazards of concern.
However, the PIC is able to provide a sound management structure for how and when food contact surfaces are
cleaned and sanitized in the facility and who is responsible for following the procedures. Under the procedures
section, therefore, the data collector would record NO for statement #1 related to critical limits but YES to
statements #2 (how and when) and #3 (who is assigned to correctly perform the procedure).
After marking the first three statements, the data collector will review the responses. If ALL three statements
are marked “YES”, the data collector will then mark a response “YES” or “NO” to the last question in the
133

shaded row. The fourth question in the shaded row is designed to assess whether there are written materials
available to support the PTM element.
If any of the first three statements have been marked “NO” the data collector does not enter a response for the
shaded statement. The first three statements MUST be marked “YES” for the data collector to enter a response
for the fourth statement.

In the “COMMENT” section of the data collection form, provide a description of any scenarios that presented
some challenges to assigning a 1-4 marking for a management system (PTM) element.

134

FOOD IS PROTECTED FROM CROSS CONTAMINATION

135

FOOD IS PROTECTED FROM CROSS CONTAMINATION

136

FOOD CONTACT SURFACES – CLEANED & SANITIZED

137

FOOD CONTACT SURFACES – CLEANED & SANITIZED

138

Attachment C: Instructions for Conducting the Food
Safety Management System Assessment (Improper
Holding / Time & Temperature Risk Factor)
If the Improper Holding / Time & Temperature risk factor has been randomly selected within a facility for
conducting a food safety management system assessment, the data collector will complete a separate Procedure;
Training; and Monitoring (PTM) assessment for the following four data items from the data collection form:
Improper Holding / Time & Temperature Risk Factor
5. Foods requiring refrigeration are held at the proper temperature
6. Foods displayed or stored hot are held at the proper temperature
7. Foods are cooled properly
8. Refrigerated, ready-to-eat foods are properly date marked and discarded within 7 days of preparation or
opening
The data collector should complete the assessment tools provided at the end of these instructions prior to
marking the rating scale 1 – 4 on the data collection form for each of three food safety management system
assessment areas (Procedures; Training; Monitoring).

Using the Food Safety Management System Assessment Tool
For each of the two data items listed above, the data collector will individually assess each of the three food
safety management system elements (Procedures, Training, and Monitoring).
Using an effective interview process the data collector will solicit sufficient information from the PIC to
respond “YES” or “NO” to the four statements listed under each of the PTM elements.
NOTE: Data collectors are strongly encouraged to use a conversational approach to obtain information from
the person in charge on their food safety management system rather than using the tool to drive questions in the
order the statements appear.
Using the information gathered from the interview, the data collector will answer each of the first three
statements under the food safety management system element (PTM) either “YES” or “NO”. Each of the three
statements is to be answered independently of one another.
For example, the person in charge describes cooling procedures that include critical limits that do not meet
minimum requirements for controlling hazards of concern. However, the PIC is able to provide a sound
management structure for how and when cooling is done in the facility and who is responsible for following the
procedures. Under the procedures section, therefore, the data collector would record NO for statement #1
related to critical limits but YES to statements #2 (how and when) and #3 (who is assigned to correctly perform
the procedure).
After marking the first three statements, the data collector will review the responses. If ALL three statements
are marked “YES”, the data collector will then mark a response “YES” or “NO” to the last question in the
139

In the “COMMENT” section of the data collection form, provide a description of any scenarios that presented
some challenges to assigning a 1-4 marking for a management system (PTM) element.

140

FOODS REQUIRING REFRIGERATION – PROPER TEMP.

141

FOODS REQUIRING REFRIGERATION – PROPER TEMP.

142

FOODS DISPLAYED OR STORED HOT – PROPER TEMP.

143

FOODS DISPLAYED OR STORED HOT – PROPER TEMP.

144

FOODS ARE COOLED PROPERLY

145

FOODS ARE COOLED PROPERLY

146

REFRIGERATED, RTE FOODS – DATE MARKED

147

REFRIGERATED, RTE FOODS – DATE MARKED

148

Attachment D: Instructions for Conducting the Food
Safety Management System Assessment (Inadequate
Cooking Risk Factor)
If the Inadequate Cooking risk factor has been randomly selected within a facility for conducting a food safety
management system assessment, the data collector will complete a separate Procedure; Training; and
Monitoring (PTM) assessment for the following two data items from the data collection form:
Inadequate Cooking Risk Factor
9. Raw animal foods cooked to required temperatures
10. Cooked foods reheated to required temperatures
The data collector should complete the assessment tools provided at the end of these instructions prior to
marking the rating scale 1 – 4 on the data collection form for each of three food safety management system
assessment areas (Procedures; Training; Monitoring).

Using the Food Safety Management System Assessment Tool
For each of the two data items listed above, the data collector will individually assess each of the three food
safety management system elements (Procedures, Training, and Monitoring).
Using an effective interview process the data collector will solicit sufficient information from the PIC to
respond “YES” or “NO” to the four statements listed under each of the PTM elements.
NOTE: Data collectors are strongly encouraged to use a conversational approach to obtain information from
the person in charge on their food safety management system rather than using the tool to drive questions in the
order the statements appear.
Using the information gathered from the interview, the data collector will answer each of the first three
statements under the food safety management system element (PTM) either “YES” or “NO”. Each of the three
statements is to be answered independently of one another.
For example, the person in charge describes procedures that include final cooking temperatures (critical limits)
that do not meet minimum requirements for controlling hazards of concern. However, the PIC is able to
provide a sound management structure for how and when cooking is done in the facility and who is responsible
for following the procedures. Under the procedures section, therefore, the data collector would record NO for
statement #1 related to critical limits but YES to statements #2 (how and when) and #3 (who is assigned to
correctly perform the procedure).
After marking the first three statements, the data collector will review the responses. If ALL three statements
are marked “YES”, the data collector will then mark a response “YES” or “NO” to the last question in the
shaded row. The fourth question in the shaded row is designed to assess whether there are written materials
available to support the PTM element.
149

In the “COMMENT” section of the data collection form, provide a description of any scenarios that presented
some challenges to assigning a 1-4 marking for a management system (PTM) element.

150

RAW ANIMAL FOODS – COOKED TO REQUIRED TEMP.

151

RAW ANIMAL FOODS – COOKED TO REQUIRED TEMP.

152

COOKED FOODS REHEATED TO REQUIRED TEMP.

153

COOKED FOODS REHEATED TO REQUIRED TEMP.

154

Attachment E: Elements to Consider When Conducting
Cooling Assessments and Using Predictive Modeling to
Supplement Actual Observations
OVERVIEW
Assessing cooling of cooked foods or foods prepared from ambient ingredients can pose challenges to the data
collector due to the significant period of time needed to determine compliance with Food Code
time/temperature critical limits. In addition, all or a significant portion of the cooling process may occur
outside the tradition work hours during which the data collections are conducted. .
An evaluation of cooling methods, processes, equipment, production documents / records, as well as statements
from managers, the person-in-charge, and food employees regarding the time the cooling process was initiated,
may be used to supplement quantitative temperature measurements used to determine cooling rates. The data
collection has been designed so that it provides an opportunity to collect information specific to quantitative
cooling temperature measures (information statements A and B in the table below), and/or cooling methods /
equipment (information statement C in the table below).

DETERMINING COOLING PROCESSES
The data collector MUST make every effort to assess cooling processes in the early part of the data collection.
Always ask the question at the beginning of every data collection, “Do you have any leftovers from last night (if
an AM inspection) or are you cooling anything that was prepared this morning (if a PM inspection)?”
During your quick walk-through, open the walk-in coolers and reach-in units and note large deep containers of
TCS foods. Note the size, depth, and type (metal/plastic) of containers being used for cooling. Note the
consistency of the product (i.e., broth vs. thick stew/chili).
After your quick walk through, during which you have determined what is going on in this facility and set your
priorities for the data collection, go to the walk-in cooler (or other equipment) where the foods are being held.
Before taking any temperatures ask the manager when the containers were placed in the cooler.

155

ASSESSING COOLING METHODS / EQUIPMENT
In the ideal world, a data collector would be able to correlate observations of cooling methods / equipment with
actual quantitative temperature measurements of the foods being cooled. This may not always be the case.
Situations may arise when the establishment initiates a cooling process late in the data collection visit so that
obtaining temperature measurements over a period of time to assess cooling rates is not feasible. Another
example may be an observation of a food product that has just completed a cooling process but the operator
maintains and has documented by cooling times / temperatures in a log.
Ask the operator to explain the cooling process used for the products. This will tell you whether they in fact
added ice or used chill sticks, a blast chiller, or ice bath in the cooling process. In situations where obtaining
quantitative measurements of the cooling process is not feasible, the data collector is to assess the cooling
methods / equipment and make a determination as to whether they are in keeping with best practices that are
generally known to facilitate a cooling process. While the information statements 7A and 7B noted in the table
on the previous page would be marked not observed because no quantitative measurements were taken, the data
collector can mark information statement 7C (IN or OUT), based on observations made and information
obtained regarding cooling methods / equipment used.

QUANTITATIVE TEMPERATURE ASSESSMENTS OF COOLING RATES
If TCS foods are in the cooling process during the data collection visit, a MINIMUM of two food product time
and temperature checks are to be obtained and recorded in the temperature chart provided on the data collection
form for data item 7 – Foods are cooled properly. Food Cooling Temperature #1 is the initial internal
product temperature of a cooked TCS food or TCS food prepared from ambient ingredients that is taken at the
beginning, or near the beginning of the data collection. Food Cooling Temperature #2 is the internal product
temperature of the cooked TCS food or TCS food prepared from ambient ingredients that the data collector
assessed near the end of the data collection. This second temperature reading is from the same TCS food
observed cooling at the beginning of the data collection from which Food Cooling Temperature #1 was
obtained. These two temperature measurements provide a method for assessing the cooling rate based on the
elapsed time between the first and second temperature measurements. The data collector can use predictive
modeling as described in the next section as a tool to assist with making a determination as to whether the
cooling process is IN or OUT of compliance.

USE OF PREDICTIVE MODELING AS A TOOL TO ASSESS COOLING RATES
For the purposes of the Study, the data collector can use predictive modeling as presented in this section as a
tool for determining whether a cooling process that can not be completed during the data collection visit will
achieve the prescribed Food Code critical limits. The application of predictive modeling to actual quantitative
measurements should be used to determine both cooling procedures that are IN compliance as well as those that
are OUT of compliance.
The data collector is expected to use predictive modeling as only one of the elements in their holistic approach
to determining the compliance status for cooling. It should be placed in the context with all other observations
and information received pertaining to cooling methods, procedures, equipment, and quantitative temperature
measurements.
The use of predictive modeling requires that the data collector take actual temperature and time measurements
of the TCS food product being cooled. Statements from the food employees as to time and/or temperatures of
156

the product when it began the cooling process should not be used for predictive modeling if they were not
verified by the data collector.
TCS food must be cooled from 135 to 41ºF in 6 hours and from 135 to 70ºF within the first 2 hours. The
estimates that follow assume the worse-case IN compliance scenario, a full 2 hours to cool from 135 to 70ºF
and the remaining 4 hours to cool to 41ºF. Use of rapid chill techniques (like chill sticks, ice baths, pre-chilled
ingredients) can accelerate the rate of cooling.
To successfully cool form 135 to 70ºF within two hours, the food must be cooled at a rate of approximately
0.54ºF per minute (135 – 70 = 65ºF total divided by 120 minutes = 0.54ºF per minute) or ~32ºF per hour. To
successfully cool from 70 to 41ºF within the remaining four hours, the food must be cooled at a rate to
approximately 0.12ºF per minute (70 – 41 = 29ºF total divided by 240 minutes = 0.12ºF per minute) or ~7ºF per
hour. Depicted graphically, the cooling curve would normally produce a quick drop in temperature from 135 to
70ºF and a more gradual, extended loss of temperature as the core food temperature approaches the temperature
of the cold holding / cold equipment.
Example of IN Compliance Determination Using Predictive Modeling
Early in the data collection, vegetable beef soup is observed stored to a depth of two inches in a shallow pan in
the walk-in cooler. The walk-in cooler is maintaining an ambient air temperature of 36ºF and there is decent air
flow being produced by the compressor unit. The person-in-charge indicates that the soup was put in the cooler
30 minutes ago after being cooked in the kettle along the production line. At 11:00AM the internal temperature
of the soup is taken while it is cooling in the walk-in cooler and the warmest part is reading 128ºF. Later in the
data collection, 12:30PM, a second temperature is taken of the soup and the internal temperature is recorded at
76ºF.
In this example, the vegetable beef soup is cooling at a rate of 0.58ºF per minute (128 – 76 = 52 ÷ 90 = 0.577).
This cooling rate is faster than the 0.54ºF per minute rate required for cooling a product from 135 - 70ºF in the 2
hours presented in our conservative predictive model. Though the data collector does not know the exact time
the vegetable soup reached 135ºF, using a holistic approach to assessing cooling along with the use of
predictive modeling provides a solid foundation for marking information statement 7A IN compliance with the
Food Code critical limit of 135 - 70ºF in 2 hours.
Example of OUT of Compliance Determination Using Predictive Modeling
Early in the data collection chili is observed stored to a depth of three inches in shallow pan in the walk-in
cooler. The walk-in cooler is maintaining an ambient air temperature of 41ºF and there is decent air flow being
produced by the compressor unit. The person-in-charge indicates that the chili was put in the cooler 30 minutes
ago after being cooked in the kettle along the production line. At 11:00AM the internal temperature of the chili
is taken while cooling in the walk-in cooler and the warmest part is reading 132ºF. Later in the data collection,
12:30 PM, a second temperature is taken of the chili and the internal temperature is recorded at 100ºF.
In this example, the chili is cooling at a rate of ~0.35ºF per minute (132 – 100 = 32 ÷ 90 = 0.355). This cooling
rate is significantly slower than the 0.54ºF per minute rate required for cooling a product from 135 - 70ºF in the
2 hours presented in our conservative predictive model. The chili would have to cool another 30 degrees in 30
minutes (1ºF per minute). The 1ºF per minute cooling rate is significantly faster than the 0.54ºF per minute rate
used in our predictive modeling. Cooling rates that strictly rely on the ambient temperature and air flow within
a refrigeration unit will slow down, not increase, as the food product proceeds through the cooling process.
Though the data collector does not know the exact time the vegetable soup reached 135ºF, using a holistic
157

approach to assessing cooling along with the use of predictive modeling, a solid foundation of information has
been obtained for marking information statement 7A OUT of compliance with the Food Code critical limit of
135 - 70ºF in 2 hours

ASSESSING COOLING OF LEFTOVERS/PREPARED PRODUCTS FROM THE PREVIOUS DAY
During the data collection, the person-in-charge or other food employees may indicate that some food product
requiring cooling were placed in one or more refrigeration units earlier in the day or the night before. After
your quick walk-through, go to the walk-in cooler (or other equipment) where the foods are being held. Have
the manager/food employee point out the foods he/she was referring to. Before taking any temperatures,
determine whether the foods in question are TCS foods and ask the manager/food employee when the
containers were placed in the cooler. As with the previous cooling assessment guidance, note the size, depth
and type (metal/plastic) of the containers being used for cooling and note the consistency of the product (broth
versus thick stew/chili).
Take the temperature of the product by inserting your thermocouple probe in the four corners and center of the
product. Note the temperatures and time on your list of observations. Especially note any differences of
temperature. Food that is in the process of cooling will usually be cooler around the edges and warmer in the
middle. This is an indication that the food is still cooling rather than being cold held.
Note the ambient temperature of the unit and take some temperatures of food products (TCS or not) that you
know have been in the unit for a few days. This will provide an indication of the refrigeration unit’s
capabilities, as well as provide additional confirmation that certain products are being cooled versus being cold
held. For example, if the temperature of a product is around 44ºF, yet all the other products in the unit are 39ºF
and the unit itself is 39ºF, then the product found at 44ºF is probably being cooled especially if there are
temperature difference in the container (as described in the previous paragraph).
Once it has been determined that products are in the process of cooling, ask the manager/food employee to
explain the cooling process/methods for these products. This will provide information as to whether a rapid
cooling technique such as, adding ice to the product, using an ice bath, placing the product in a blast chiller,
etc., was an integral part of the cooling process. In some cases, when one of these rapid chill techniques is used,
proper cooling may not be achieve if the product has been placed in deep containers before it has attained an
internal product temperature of 41ºF.
The data collector is to use all the information obtained from the manager / food employees to supplement their
observations of cooling methods and quantitative temperature measurements to determine IN and OUT
markings. In many cases, food placed in the walk-in from the night before will still provide an opportunity to
assess cooling rates based on predictive modeling. For example, if the temperature of the food is taken at the
beginning of the inspection and it is 52ºF and two hours later it is 50ºF, the food is cooling at a rate of .022 / per
minute which is significantly slower than 0.12 cooling rate (70ºF - 41ºF in 4hours) used in the predictive
modeling. Based on all the information obtained regarding the cooling method, this type of quantitative
assessment adds important confirmation to the cooling assessment. Information statement 7A would be marked
OUT in this scenario.

158

File Type	application/pdf
File Title	MARKING INSTRUCTIONS FOR THE DATA COLLECTION FORM
Author	[email protected]
File Modified	2018-05-01
File Created	2016-06-06