In accordance with 5 CFR 1320, the information collection is approved for three years.
Inventory as of this Action
Requested
Previously Approved
08/31/2021
36 Months From Approved
12/31/2020
12,497
0
10,770
705,147
0
643,647
0
0
0
RM16-22: Reliability Standard PRC-027-1: The purpose of proposed Reliability Standard PRC-027-1 is to maintain the coordination of Protection Systems installed to detect and isolate Faults on Bulk Electric System (BES) Elements, such that those Protection Systems operate in the intended sequence during Faults.
RM16-20: Reliability Standard PRC-012-2 is to supersede âpendingâ Reliability Standards PRC-012-1, PRC-013-1, and PRC-014-1 and to retire and replace currently-effective Reliability Standards PRC-015-1 and PRC-016-1. Reliability Standard PRC-012-2 represents substantial improvements over these Reliability Standards because it streamlines and consolidates existing requirements; corrects the applicability of previously unapproved Reliability Standards; and implements a continent-wide RAS review program.
Final Rule in RM16-22. The purpose of Reliability Standard PRC-027-1 (under FERC-725G) is to maintain the coordination of protection systems installed to detect and isolate faults on bulk electric system elements, such that those protection systems operate in the intended sequence during faults. The implementation of Reliability Standard PRC-027-1 is included in FERC-725G and PER-006-1 which is included in FERC-725Y.
$5,723
No
No
No
No
No
No
Uncollected
Syed Ahmad 202 502-8718
No
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.