Natural Gas STAR Annual Report - Gathering & Processing Segment | ||
FORM VERSION: REPORTING SEASON 20XX | ||
Partner Name | ||
Reporting Year | 20XX | |
Use the Table of Contents below to navigate to the different tabs of the form. You can use column B to indicate if you reported data on a specific tab. | ||
Distribution Emission Sources | Data Reported | Information |
Dehydrator Vents | Install flash tank separators on glycol dehydrator vents | |
Equipment Leaks | Directed inspection and maintenance at gas plants and booster stations | |
Pneumatic Controllers - Gathering & Boosting | Convert high-bleed controllers to low-bleed; convert high-bleed or low-bleed controllers to zero-emitting controllers; remove controllers from service with no replacement. | |
Pneumatic Controllers - Processing | ||
Additional Gathering and Processing Activities | Use this tab to report all other methane reductions in the Gathering and Processing segment. You will be able to select the technology/practice used from the list of Natural Gas STAR Partner Reported Opportunities. If the activity you are reporting is not included in the list, please contact EPA at [email protected] | |
The public reporting and recordkeeping burden for this collection of information is estimated to average 51 hours for each new response and 25 hours for subsequent responses. Send comments on the Agency's need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including through the use of automated collection techniques to the Director, Collection Strategies Division, U.S. Environmental Protection Agency (2822T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number in any correspondence. Do not send the completed form to this address. |
Dehydrator Vents | Return to Table of Contents | |||||||||||||
Install Flash Tank Separators on Glycol Dehydrators | ||||||||||||||
Start Year | Eligible Sunset Years for this Activity |
Automatically calculate sunsets? | End Year | Calculation Method: Default, Standard, or Other | Calculate Using Default | Calculate Using Standard Calculation | Other Calculation | Provide additional comments or detail about how your company implemented this BMP | ||||||
Number of Flash Tank Separators Installed | Average Gas Throughput (MMcf/yr) | Calculated Total Methane Emission Reduction Based on Default Values {[Number of Flash Tank Separators Installed]x[Average Gas Throughput]) x 170 scf/MMcf x 0.9] / 1000]} |
TEG Circulation Rate (gal/hr) | Methane Entrainment Rate (scf/gal) | Hours of Operation (hrs/yr) | Calculated Total Methane Emission Reduction Based on Standard Calculation {[TEG Circulation Rate]x [Methane Entrainment Rate]x[Hours of Operation] x 0.90] / 1000} |
Total Methane Emission Reduction Based on Other Assumptions (Mcf/yr) |
Explain Reduction Calculation Used | ||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
0 | 0 | |||||||||||||
Equipment Leaks | Return to Table of Contents | |||||||
Directed inspection and maintenance at gas plants and booster stations | ||||||||
Year | Total Number of Surveys Conducted | Total Number of Leaks Found | Total Number of Leaks Repaired | Total Number of Facilities at Which Leaks Repaired | Basis for Emission Reduction Estimate | Total Methane Emission Reductions (Mcf/yr) |
Explain Reduction Calculation Used | Provide additional comments or detail about how your company implemented this BMP |
Pneumatic Controllers - Gathering and Boosting | Return to Table of Contents | |||||||||
Convert high-bleed controllers to low-bleed; convert high-bleed or low-bleed controllers to zero-emitting controllers; remove controllers from service with no replacement | ||||||||||
Convert high-bleed to low-bleed | Convert high-bleed to zero-bleed/remove from service | Convert low-bleed to zero-bleed/remove from service | ||||||||
Start Year | New or Ongoing? | Average Methane Content of Gas (enter as a decimal; leave blank to use default 82.1% methane) | Average annual operating hours (leave blank to use default 8760 hours) | Number of controllers converted | Calculated Total Methane Emission Reductions (Mcf/yr) |
Number of controllers converted/removed from service | Calculated Total Methane Emission Reductions (Mcf/yr) |
Number of controllers converted/removed from service | Calculated Total Methane Emission Reductions (Mcf/yr) |
Provide additional comments or detail about how your company implemented this BMP |
Pneumatic Controllers | Return to Table of Contents | |||||||||
Convert high-bleed controllers to low-bleed; convert high-bleed or low-bleed controllers to zero-emitting controllers; remove controllers from service with no replacement | ||||||||||
Convert high-bleed to low-bleed | Convert high-bleed to zero-bleed/remove from service | Convert low-bleed to zero-bleed/remove from service | ||||||||
Start Year | New or Ongoing? | Average Methane Content of Gas (enter as a decimal; leave blank to use default 82.1% methane) | Average annual operating hours (leave blank to use default 8760 hours) | Number of controllers converted | Calculated Total Methane Emission Reductions (Mcf/yr) |
Number of controllers converted/removed from service | Calculated Total Methane Emission Reductions (Mcf/yr) |
Number of controllers converted/removed from service | Calculated Total Methane Emission Reductions (Mcf/yr) |
Provide additional comments or detail about how your company implemented this BMP |
Additional Gathering & Processing Activities | Return to Table of Contents | |||||||
Start Year | Select the Activity | Eligible Sunset Years for this Activity |
Automatically calculate sunsets (if Sunset Years >1)? | End Year | Total Methane Emission Reduction (Mcf/yr) |
Basis for Emission Reduction Estimate | Explain Reduction Calculation Used | Describe how your company implemented this activity (e.g., number of units installed or other activities conducted) |
This sheet summarizes values used in calculations in this workbook. If you have questions on any of the values used, please contact EPA at [email protected] | |||||||
Install Flash Tank Separators on Glycol Dehydrators | |||||||
Default Values | |||||||
Emission Factor1 | 170 | scf/MMcfd | |||||
Efficiency2 | 0.9 | percent (expressed as decimal) | |||||
Pneumatic Controllers | |||||||
Emission Factors - Gathering and Boosting | Source: 40 CFR 98, Table W-1A (Population Emission Factors, Gas Service) | ||||||
Low Continuous Bleed Pneumatic Device Vents | 1.39 | scf whole gas / hour / device | |||||
High Continuous Bleed Pneumatic Device Vents | 37.3 | scf whole gas / hour / device | |||||
Emission Factors - Processing | Source: 40 CFR 98, Table W-3B [Transmission segment factors used as a proxy for Processing] | ||||||
Low Continuous Bleed Pneumatic Device Vents | 1.37 | scf whole gas / hour / device | |||||
High Continuous Bleed Pneumatic Device Vents | 18.2 | scf whole gas / hour / device | |||||
Default Values | |||||||
Operating hours | 8760 | Assumes 24/7 operation all year | |||||
Methane content of natural gas | 82.1% | Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2016, Annex 3.6 (Table 3.6-3), https://www.epa.gov/sites/production/files/2018-04/2018_ghgi_natural_gas_systems_annex_tables.xlsx | |||||
Notes: | |||||||
1 Derived from “Methane Emissions from the Natural Gas Industry,” Volume 14, Glycol Dehydrators, co-sponsored by the Gas Research Institute and EPA, June 1996 | |||||||
2 Derived from “Optimize Glycol Circulation And Install Flash Tank Separators In Glycol Dehydrators” Lessons Learned document, EPA, October 2006. |
File Type | application/vnd.openxmlformats-officedocument.spreadsheetml.sheet |
File Modified | 0000-00-00 |
File Created | 0000-00-00 |