BSEE-0124 Applications for Permit to Modify

---

Overview

0124 pg 1
0124 pg 2
0124 pg 3

---

Sheet 1: 0124 pg 1

U.S. Department of the Interior

OMB Control No. 1014-0026

Bureau of Safety and Environmental

OMB Approval Expires xx/xx/xxxx

Enforcement (BSEE)

Application for Permit to Modify (APM)

1. WELL NAME (CURRENT)

2. SIDETRACK NO. (CURRENT)

3. BYPASS NO. (CURRENT)

4. OPERATOR NAME and ADDRESS

(Submitting office)

5. API WELL NO. (12 digits)

6. START DATE (Proposed)

7. ESTIMATED DURATION (DAYS)

8.

9. If revision, list changes:

Revision

WELL AT TOTAL DEPTH

WELL AT SURFACE

10. LEASE NO.

13. LEASE NO.

11. AREA NAME

14. AREA NAME

12. BLOCK NO.

15. BLOCK NO.

Proposed or Completed Work

16. PROPOSED OR COMPLETED WORK (Describe in Section 17)

PLEASE SELECT ONLY ONE PRIMARY TYPE IN BOLD AND AS MANY SECONDARY TYPES AS NECESSARY.

Completion

Workover:

Enhance Production

Initial Completion

Change Tubing

Acidize

Other Enhance

Reperforation

Casing Pressure Repair

Artificial Lift

Production

Change Zone

Other Workover

Wash/Desand Well

Modify Perforations

Abandonment of Well Bore:

Jet Well

Utility Other Completion

Permanent Abandonment

Hydraulic Fracturing

Initial Injection Well

Temporary Abandonment

Information:

Additional Fluids for Injection

Plugback to Sidetrack/Bypass

Surface Location Plat

Other Utility

Site Clearance

Change Well Name

Zone Isolation

Other Information

Other Abandonment

17. BRIEFLY DESCRIBE PROPOSED OPERATIONS (Attach prognosis):

18. LIST ALL ATTACHMENTS (Attach complete well prognosis and attachments required by 30 CFR 250.465; 250.513(a); 250.513(b); 250.518(f); 250.613(a) through (c); 250.616(a)(4); 250.619(f); 250.701; 250.702; 250.713(a) through (e); 250.713(g); 250.720(b); 250.721(g)(4); 250.730(a) 250.731; 250.733(b)(2)(i); 250.734(a)(7); 250.734(b)(1); 250.737(d)(2)(i); 250.737(d)(3)(ii); 250.737(d)(4)(ii); 250.737(d)(12)(i); 250.738(b)(4); 250.738(f); 250.738(i) and (j); 250.738(m) through (n); 250.738(o); 250.1706(a)(4); 250.1712; 250.1721(a); 250.1721(g); 250.1722(a); 250.1722(d); or 250.1743(a).

19. Rig Name or Primary Unit (e.g., Wireline Unit, Coil Tubing, Snubbing Unit, etc.)

20. The greater of SITP or MASP (psi) and, if subsea well, the greater of SIWHP or MAWHP (psi):

21. Type of Safety Valve (SV): _____ SCSSV _____ SSCSV _____ N/A

22. SV Depth BML (ft):

23.

Rig BOP (Rams)

24.

Rig BOP (Annular)

Size:

Working Pressure

Test Pressure

Working Pressure

Test Pressure

(inches)

(psi)

(psi)

(psi)

(psi)

________

___________

Low/High: ________

_________

Low/High: _________

BSEE Form BSEE-0124 (Mo/Year - Supersedes all previous versions of this form which may not be used.) Page 1 of 3

---

Sheet 2: 0124 pg 2

Application for Permit to Modify (APM) (con't) page 2

25. Coiled Tubing BOP:

26.

Snubbing Unit BOP:

27.

Wireline Lubricator:

Working Pressure

BOP Test Pressure

Working Pressure

Test Pressure

Working Pressure

Test Pressure

(psi)

(psi)

(psi)

(psi)

(psi)

(psi)

____________

Low/High: __________

____________

Low/High: _________

_________

Low/High: ________

28. Wireline BOP:

Working Pressure

BOP Test Pressure

This is space is currently blank

(psi)

(psi)

____________

Low/High: __________

29. CONTACT NAME:

30. CONTACT TELEPHONE NO.:

31. CONTACT E-MAIL ADDRESS:

32. AUTHORIZING OFFICIAL (Type or print name)

33. TITLE

34. AUTHORIZING SIGNATURE

35. DATE

THIS SPACE FOR BSEE USE ONLY

APPROVED BY:

TITLE

DATE

36)

Questions

Response

Remarks

A) Is H2S present in the well? If yes, then comment on the inclusion of a Contingency Plan for this operation.

YES

NO

N/A

B) Is this proposed operation the only lease holding activity for the subject lease? If yes, then comment.

YES

NO

N/A

C) Will all wells in the well bay and related production equipment be shut-in when moving on to or off of an offshore platform, or from well to well on the platform? If not, please explain.

YES

NO

N/A

D) If sands are to be commingled for this completion, has approval been obtained?

YES

NO

N/A

E) Will the completed interval be within 500 feet of a block line? If yes, then comment.

YES

NO

N/A

F) For permanent abandonment, will casings be cut 15 feet below the mudline? If no, then comment.

YES

NO

N/A

BSEE Form BSEE-0124 (Mo/Year - Supersedes all previous versions of this form which may not be used.) Page 2 of 3

---

Sheet 3: 0124 pg 3

Application for Permit to Modify (APM) (con't) page 3

36) Con't

Questions

Response

Remarks

G) Will you ensure well-control fluids, equipment, and operations be designed, utilized, maintained, and/or tested as necessary to control the well in foreseeable conditions and circumstances, including subfreezing conditions?

YES

NO

N/A

H) Will digital BOP testing be used for this operation? If "yes", state which version in the comment box?

YES

NO

N/A

I) Is this APM being submitted to remediate sustained casing pressure (SCP)? If "yes," please specify annulus in the comment box. If you have been given a departure/denial for SCP as discussed in section #18, include in the attachments.

YES

NO

N/A

J) Are you pulling tubulars and/or casing with a crane? If "YES," have documentation on how you will verify the load is free per API RP 2D, and use specific parameters while lifting tubulars and/or casing out of the well. This documentation must be maintained by the lessee at the lessee's field office.

YES

NO

N/A

K) Will the proposed operation be covered by an EPA Discharge Permit? (Please provide permit number comments for this question).

YES

NO

N/A

L) Will you be using multiple size workstring/ tubing/coil tubing/snubbing/wireline? If yes, attach a list of all sizes to be used including the size, weight, and grade.

YES

NO

N/A

M) For both surface and subsea operations, are you utilizing a dynamically positioned vessel and/or non-bottom supported vessel at any time during this operation?

YES

NO

CERTIFICATION: I certify that the information submitted is complete and accurate to the best of my knowledge. I understand that making a false statement may subject me to criminal penalties under 18 U.S.C. 1001.

Name and Title: _________________________________________ Date: ____________________

PAPERWORK REDUCTION ACT OF 1995(PRA) STATEMENT: The PRA (44 U.S.C. 3501 et seq.) requires us to inform you that we collect this information to obtain knowledge of equipment and procedures to be used in drilling operations. BSEE uses the information to evaluate, approve, or disapprove adequacy of equipment and/or procedures to safely perform drilling operations. Responses are mandatory (43 U.S.C. 1334). Propriety data are covered under 30 CFR 250.197. An agency may not conduct or sponsor, and a person is not required to respond to a collection of information unless it displays a currently valid OMB Control Number. Public reporting burden for reviewing the instructions, completing and filling out this form only is estimated to average 1 hour per response. The burden for the attachments required range from 10 minutes to 1.5 hours depending on the requirement. Direct comments regarding the burden or any other aspect of this form to the Information Collection Clearance Officer, BSEE, 45600 Woodland Road, Sterling VA 20166.

BSEE Form BSEE-0124 (Mo/Year - Supersedes all previous versions of this form which may not be used.) Page 3 of 3