SUPPORTING STATEMENT
EXTENSION OF OMB APPROVAL
DEFECT/NONCOMPLIANCE REPORT (CG 4917) AND
CAMPAIGN UPDATE REPORT (CG-4918)
A. JUSTIFICATION:
1. CIRCUMSTANCES WHICH MAKE COLLECTION OF INFORMATION NECESSARY:
The Recreational Boating Product Assurance Branch (BSX 23) in the Office of Boating Safety develops and enforces compliance with U.S. Coast Guard safety standards and regulations under the authority of 46 U.S.C. Chapter 43.
Compliance enforcement includes monitoring defect notification and recall campaigns which boat and engine manufacturers conduct in accordance with 46 U.S.C. 4310 for failures to comply with applicable U.S. Coast Guard safety standards or regulations, and for defects which in the words of the Federal statutes, "create a substantial risk of personal injury to the public." This authority is delegated by the Secretary to the Coast Guard via the Department of Homeland Security Delegation No. 0170.1, Revision No. 01.2. (II)(92)(b). Boat and "designated" associated equipment (inboard engine, outboard motor, sterndrive engine or an inflatable personal flotation device approved under 46 CFR 160.076) manufacturers use the Defect/Noncompliance Report (CG-4917) and Campaign Update Report (CG-4918) forms to provide an initial report and to report their progress in conducting recall campaigns.
Defect/Noncompliance Report (CG-4917):
According to 46 U.S.C. 4310(d) and (e) and 33 CFR 179.13(a)(2) the manufacturer shall provide the Commandant of the Coast Guard with an initial report consisting of certain information about the defect notification and recall campaign being conducted. Upon receipt of information from a manufacturer indicating the initiation of a recall, the Recreational Boating Product Assurance Branch assigns a recall campaign number, and sends the manufacturer a CG-4917 form for supplying the information. The CG-4917 form describes:
(1) the manufacturer's reason for conducting defect notification,
(2) the units affected by the defect or failure to comply,
(3) the degree of danger to the public with continued use of the affected product,
(4) the extent of the problem, and
(5) what corrective action the manufacturer plans to take.
Alternatively, manufacturers are allowed the option of supplying the required information without using the form; however, a majority of manufacturers choose to use the form..
Campaign Update Report (CG-4918):
According to 33 CFR 179.15(a), a manufacturer who makes an initial report required by 33 CFR 179.13 shall send to the Commandant of the Coast Guard a follow-up report within 60 days after the initial report. The follow-up report must contain at least the following information:
"(1) A positive identification of the initial report;
(2) The number of units in which the defect was discovered as of the date of the follow-up report;
(3) The number of units in which corrective action has been completed as of the date of the follow-up report;
(4) The number of first purchasers not notified because of an out of date name or address or both; and
(5) An updating of the information required by Section 179.13."
Section 179.15 also states "Each manufacturer shall submit any additional follow-up reports requested by the Commandant." The Recreational Boating Product Assurance Branch furnishes the manufacturer with CG-4918 forms for supplying the information.
Per an agreement with OMB, the first Campaign Update Report form (CG-4918) must be submitted within 60 days after the manufacturer submits the Defect Noncompliance Report. Additional CG-4918 forms must be submitted within 90-day intervals thereafter, until the recall campaign reaches an acceptable level of completion.
Alternatively, manufacturers are allowed the option of supplying the required information without using the form; however, a majority of manufacturers choose to use the form.
2. HOW, BY WHOM, HOW FREQUENTLY, AND FOR WHAT PURPOSE IS THE INFORMATION USED AND ACTUAL USE THE COAST GUARD HAS MADE OF THE INFORMATION FROM THE CURRENT COLLECTION?
The Recreational Boating Product Assurance Branch uses the information collected with the CG-4917 and CG-4918 forms to:
(1) Assess the severity of defects and failures to comply with applicable safety standards and regulations in boats and designated associated equipment (designated in 33 CFR 179.03);
(2) Determine the degree of danger to the public with continued use of the product without correction of the defect or noncompliance;
(3) Determine whether a manufacturer's proposed method for correction of the defect or noncompliance is appropriate; and
(4) Monitor the progress of manufacturer notifications of owners and corrections of affected units and determine whether the manufacturer is exercising reasonable diligence in performing those responsibilities.
Once the Coast Guard receives the Defect/Noncompliance Report (CG-4917), the information is entered into a database. The Recreational Boating Product Assurance Branch uses the database for the purposes of monitoring when Campaign Update Reports (CG-4918) are due; to quickly gather significant information about specific recall campaigns; to evaluate a manufacturer's diligence in conducting a campaign; and in evaluating the need for safety standards addressing specific problems.
The Coast Guard Office of Boating Safety has a contractor-run website (http://www.uscgboating.org) where visitors can access a variety of recreational boating safety information. One of the popular features of the site is access to a database where owners can access information concerning defect notification and recall campaigns.
3. CONSIDERATION GIVEN TO THE USE OF IMPROVED INFORMATION TECHNOLOGY
Manufacturers are not required to use the CG-4917 and 4918 forms. The Federal defect notification regulations in 33 CFR 179.13 and 179.15 specify the information the manufacturer must provide in an initial report – the Defect/Noncompliance Report (CG-4917) and in any follow-up reports – the Campaign Update Report (CG-4918). The Recreational Boating Product Assurance Branch believes use of the forms is the easiest way to collect the necessary information. However, the Coast Guard accepts information provided in other formats such as:
Narrative form such as in a letter;
Via electronic mail; or
Via facsimile.
90% of the active recall campaigns as of December 2021 send the CG-4917 and CG 4918 forms electronically. The forms are provided to the manufacturers in either Adobe Acrobat.
4. EFFORTS TO IDENTIFY DUPLICATION?
A search of the USCG data collections revealed no duplications of this information collection. There is no similar data collected
5. IF THE COLLECTION OF INFORMATION INVOLVES SMALL BUSINESSES OR OTHER SMALL ENTITIES, WHAT METHODS USED TO MINIMIZE THE BURDEN?
Small businesses manufacture fewer units annually, therefore minimizing burdens. At the same time, however, many small businesses or small entities might not have computers or facsimile machines and might not be able to take advantage of reductions in burdens by filing electronically.
6.
CONSEQUENCE TO
COAST GUARD BOATING STANDARDS PROGRAM IF CG-4917 AND CG ARE WITHDRAWN
OR INFORMATION IS COLLECTED LESS FREQUENTLY.
The information is collected quarterly from manufacturers conducting recalls of their products. A manufacturer conducting a recall campaign submits one CG-4917 form or some other type of initial report such as a letter containing the information required by 46 U.S.C. 4310(d) and 179.13. The manufacturer is then required to submit the first Campaign Update Report form within 60 days of the initial report, and additional reports every 90 days thereafter, until an acceptable number of owners have been notified and an acceptable number of units have been corrected. If the Recreational Boating Product Assurance Branch did not collect the information or collected the information less frequently, the Coast Guard would not be able to determine:
(1) Whether owners of boats, inboard engines, outboard motors or sterndrive units which failed to comply with applicable U.S. Coast Guard safety standards or contained defects which create a substantial risk of personal injury to the public were being notified by the manufacturers of those products about the existence of the recalls and potential danger with continued use of the defective products; and
(2) Whether manufacturers subject to 46 U.S.C. 4310 and 33 CFR 179 were carrying out their statutory and regulatory responsibilities.
7. EXPLAIN ANY SPECIAL CIRCUMSTANCES RELATED TO THIS INFORMATION COLLECTION
There are no special circumstances applicable to this information collection
8. DESCRIBE EFFORTS TO CONSULT WITH PERSONS OUTSIDE THE AGENCY
A 60-day Notice was published in the Federal Register to obtain public comment on this collection (See [USCG-2022-0202]; April 5, 2022, 87 FR 19691) and 30-Day Notice (June XX, 2022, 87 FR XXXX) were published in the Federal Register to obtain public comment on this collection. The Coast Guard has not received any comments on this information collection
9. EXPLAIN ANY DECISION TO PROVIDE ANY PAYMENT OR GIFT TO RESPONDENTS, OTHER THAN REMUNERATION OF CONTRACTORS OR GRANTEES.
The Coast Guard does not provide payments or gifts to respondents in exchange for the information collected.
10. DESCRIBE ANY ASSURANCE OF CONFIDENTIALITY PROVIDED TO RESPONDENTS
There are no assurances of confidentiality for this information collection.
11. ADDITIONAL JUSTIFICATION FOR ANY QUESTIONS OF A SENSITIVE NATURE:
There are no questions of a sensitive nature involved in this information collection.
12. PROVIDE ESTIMATES OF THE BURDEN OF THE COLLECTION OF INFORMATION:
Total annual first year burdens for respondents – 166.5 hours
Total annual follow-on burdens for respondents – 296 hours for 2 years
Grand Total burdens/average campaign for respondents – 462.5 hours
A summary of the recall campaigns initiated annually, since 2000 is listed below:
YEAR NUMBER OF CAMPAIGNS
2000 27
2001 70
2002 65
2003 63
2004 43
2005 67
2006 77
2007 33
2008 38
2009 33
2010 24
2011 21
2012 11
2013 9
2014 12
2015 20
2016 18
2017 19
2018 28
2019 47
2020 32
757/21 = 36
An estimated average of four (4) reports is filed annually by each of 36 respondents for a total of 144 responses annually for an average three year campaign timeframe.
one Defect/Noncompliance Report (CG-4917) and three Campaign Update Reports (CG-4918) (the first year); and
four Campaign Update Reports/year for an average of two years.
Responses:
The Recreational Boating Product Assurance Branch estimates that it takes approximately one hour to read instructions, gather the required information and complete a CG-4917 form.
The Recreational Boating Product Assurance Branch estimates that it takes approximately one-half hour to read instructions, gather the required information and complete a CG-4918 form.
An average of 36 recall campaigns is conducted by boat, inboard engine, outboard motor and sterndrive unit manufacturers annually.
First Year Estimate:
CG-4917: 36 x 1 hour = 36 hours
CG-4918: 36 x 1 hour x 3* = 108 hours**
Follow-on Two Year Estimate:
CG-4918: 36 x 1 hour x 4 = 144 hours/yr x 2 years = 288 hours
*As stated previously, per an agreement with OMB, the Recreational Boating Product Assurance Branch collects the information in the CG-4917 within 30 days, the information in the first CG-4918 within 60 days after receipt of the DNR, and additional CG-4918s every 90 days thereafter. e.g., a total of four reports the first year and four reports each additional year the campaign remains open.
** According to OMB instructions, if the hour burden on respondents is expected to vary widely because of differences in activity, size or complexity, show the range of estimated hour burden, and explain the reasons for the variance. Numbers of units involved in recall campaigns vary widely. A rowboat manufacturer, who was a small business entity, and whose boat failed compliance testing, might conduct a recall campaign for 10 or fewer boats. A Personal Watercraft (PWC) manufacturer, however, might conduct a recall campaign for as many as 35,000 boats. While the one hour estimate for completing the CG-4917 might be somewhat high for a manufacturer recalling 10 or fewer boats, the larger manufacturers have sophisticated, computerized databases which they can use to assemble the necessary information making one hour a reasonable estimate of the time required to gather the information, even for tens of thousands of units.
In addition, the larger manufacturers may have designed their hull identification numbering systems to specifically identify affected units. All boats are required to bear two distinct 12 character Hull Identification Numbers (HINs) (see OMB approval No. 1625-0056). The first three characters in the HIN are the Manufacturer Identification Code (MIC). Characters four through eight are a manufacturer serial number consisting of letters of the English alphabet or Arabic numerals or both. A manufacturer or importer may choose any serial number sequence as long as each boat has a different HIN. Some manufacturers use the hull serial numbers portion of their boats HINs to indicate vessel-specific information of significance to the manufacturer, such as boat type, model, type of propulsion, etc., which can help identify affected units involved in a recall campaign. The last four characters indicate month and year of manufacture and model year, enabling a manufacturer to further delineate affected units if he or she so desires.
Records: In order to provide Campaign Update Reports (CG-4918), the manufacturer would need to keep records of:
(1) Number of units which might contain the problem;
(2) Number of first purchasers notified;
(3) Number of dealers/distributors notified;
(4) Number of units corrected or repaired;
(5) Number of units inspected and were not affected; and
(6) Number of owners who refused the offer for correction.
However, there is no other specific recordkeeping requirement associated with the CG-4917 or CG-4918.
The Recreational Boating Product Assurance Branch estimates one-half hour per report form for recordkeeping.
First Year Estimate:
CG-4917: 36 x .5 hour = 18 hours
CG-4918: 36 x .5 hour x 3 = 54 hours
Follow-on Two Year Estimate:
CG-4918: 36 x .5 hour x 4 = 72 hours/yr x 2 years = 144 hours
First year burden hours:
Responses: 90 hours
Recordkeeping: 72 hours
Total: 162 hours
Follow-on burden hours:
Responses: 72 hours/yr x 2 years = 144
Recordkeeping: 72 hours/yr x 2 years = 144
Total: 288 hours
Grand total burden hours/average campaign: 450 hours
13. PROVIDE AN ESTIMATE OF THE TOTAL ANNUAL COST BURDEN TO RESPONDENTS OR RECORDKEEPERS RESULTING FROM THE COLLECTION OF INFORMATION.
Total annual first year cost burden to respondents = $3,780.00 (responses) + $3,024.00 (recordkeeping) + $244.80 (postage/4917) + $62.64 (postage/4918) = $7,111.44
Total annual follow-on cost burden to respondents = $6,048.00 (responses) + $6,048.00 (recordkeeping) + $88.52 (postage/4918) = $12,184.52 (two year time)
Preparation Cost for Responses:
The Recreational Boating Product Assurance Branch estimates that it takes approximately one hour to read instructions, gather the required information and complete a CG-4917 form.
The Recreational Boating Product Assurance Branch estimates that it takes approximately one to read instructions, gather the required information and complete a CG-4918 form.
First Year Estimate:
CG-4917: 36 x 1 hour = 36 hours
CG-4918: 36 x .5 hour x 3 = 54 hours
Follow-on Two Year Estimate:
CG-4918: 36 x .5 hour x 4 = 72 hours/yr x 2 years = 144 hours
Estimated $42.00 per hour cost for a secretary*
*GS-4 outside Government per COMDTINST 7310.1V dtd. 03 NOV 2021
First Year Estimate:
CG-4917: 36 x 1 hour x $42.00 = $1,512.00
CG-4918: 36 x .5 hour x 3 x $42.00 = $2,268.00
Follow-on Two Year Estimate:
CG-4918: 36 x .5 hour x 4 x $42.00 = $3,024.00/yr x 2 years = $6,048.00
Total annual first year preparation cost burden to respondents = $3,780.00
Total annual follow-on preparation cost burden to respondents = $3,024.00/yr for 2 years = $6,048.00
Grand Total preparation cost burden/average campaign to respondents = $9828.00
Recordkeeping Cost:
The Recreational Boating Product Assurance Branch estimates one-half hour per report form for recordkeeping.
First Year Estimate:
CG-4917: 36 x .5 hour = 18 hours
CG-4918: 36 x .5 hour x 3 = 54 hours
Follow-on Two Year Estimate:
CG-4918: 36 x .5 hour x 4 = 72 hours/yr x 2 years = 144 hours
Estimated $42.00 per hour cost for a secretary*
*GS-4 outside Government per COMDTINST 7310.1U dtd. 03 NOV 2021
First Year Estimate:
CG-4917: 36 x .5 hour x $42.00 = $756.00
CG-4918: 36 x .5 hour x 3 x $42.00 = $2,268.00
Follow-on Two Year Estimate:
CG-4918: 36 x .5 hour x 4 x $42.00 = $3,024.00/yr x 2 years = $6,048.00
Total annual first year recordkeeping cost burden to respondents = $3,024.00
Total annual follow-on recordkeeping cost burden to respondents = $3,024.00/yr for 2 years = $6,048.00
Grand Total recordkeeping cost burden/average campaign to respondents = $9,072.00
Postage cost (if forms are mailed):
According to 179.13 and 179.15, the initial report (CG-4917) and any follow-up reports (CG-4918) to the Commandant shall be sent by first class mail or certified mail:
If first class mail = $0.58 per response*
If certified mail = $3.75 per response ($3.75 + postage)**
* ** It’s not realistic to average the two, so costs computed based on more expensive method.
Three costs make up the $6.80 USPS Certified
Mail rates:
1. First-Class
Postage $0.58
(this is a letter size envelope, up to 1 oz in weight)
2.
Certified Mail Fee $3.75
3. Return Receipt (Green Card)
$3.05
Total Cost per Letter
$6.80
First Year Estimate (CG Form 4917):
CG-4917: 36 x $6.80 = $244.80
First Year Follow-on:
CG-4918: 36 x 3 x $0.58 = $62.64 (Almost all reports sent first-class mail)
Follow-on Two-Year Estimate:
CG-4918: 36 x 4 x $0.58 = $88.52 (Almost all reports sent first-class mail)
14. TOTAL ESTIMATED COST TO FEDERAL GOVERNMENT
The estimated annual cost to the Federal Government is $1,246.40.
Estimated printing costs: $22.00 annually.
Cost of man-hours: $1,315.60
The estimated average number of respondents annually is 36. It takes an estimated five (5) minutes to review and enter the information collected on a Defect/Noncompliance form (CG-4917) into the records database and an estimated five (5) minutes to review and enter the information collected on each Campaign Update Report (CG-4918) into the records database:
Estimated average cost per man-hour = $98.00
36 x 22/60 = 13.20 x $98.00= $1,293.60 + $22.00 (for forms) = $1,315.60
15. EXPLAIN REASONS FOR PROGRAM ADJUSTMENTS: This is an ADJUSTMENT due to a decrease in burden due to a small downtick in recall campaigns over the past three years (2018-2020), with an increase in the cost of postage and an increase in labor costs. The Coast Guard’s factory inspection program has assisted in keeping boat defects/recalls down through working with manufacturers at the factory to correct possible defects at the source.
16. OUTLINE PLANS FOR TABULATION, STATISTICAL ANALYSIS AND PUBLICATION: The collection of this information does not involve statistical evaluation or publication.
17. DISPLAY OF EXPIRATION DATE. USCG will display the expiration date for OMB approval of this information collection.
18. EXPLAIN EACH EXCEPTION TO THE CERTIFICATION STATEMENT IDENTIFIED IN ITEM 19OF OMB FORM 83-1.
B. DESCRIPTION OF COLLECTIONS OF INFORMATION THAT EMPLOY STATISTICAL METHODS: The collection of this information does not involve statistical methods.
File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
File Title | SUPPORTING STATEMENT |
Author | USCG |
File Modified | 0000-00-00 |
File Created | 2022-10-05 |