FERC-725G (DLO in RD23-5-000), Mandatory Reliability Standards for the Bulk-Power System: PRC Rel Stds.
Revision of a currently approved collection
No
Regular
09/05/2024
Requested
Previously Approved
36 Months From Approved
05/31/2026
11,367
10,862
726,718
721,995
0
0
(An attachment to all standards within FERC-725G can be found in the Supplementary Document Section.) RD23-5
The Reliability Standard PRC-0023-6 revisions will result in a change in how relay settings will be assessed under Requirement R1 of out-of-step blocking elements but will not result in reporting or recordkeeping requirements or burden. As of February 2024, there are 324 transmission owners, 1,173 generator owners, 371 distribution providers and 62 planning coordinators registered with NERC. These registered entities will have to comply requirements in the proposed Reliability Standard PRC-023-6.
For 725G (PRC Reliability Standards), the change (Increase in responses and burden hours) is due to agency discretion as we have updated the method to determine affected entities and their responses.
Program Change to Agency Discretion
-PRC-023-6 Increased by 643 responses and 9,139 (rounded) burden hours for the One-time burden associated by the updated Reliability standard PRC-023-6 (previously PRC-023-5).
-The one-time burden that increased due to revisions from PRC-023-5, PRC-026-2, and PRC-002-3 in RD22-2 have ended and were removed creating a removal of 138 responses and 4,416 annual burden hours
$8,396
No
No
No
No
No
No
No
Syed Ahmad 202 502-8718
No
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.