ETA 671 Section II with proposed minor changes

Program Registration and Apprenticeship Agreement Office of Apprenticeship

U.S. Department of Labor Attachment 3 E mployment and Training Administration

APPRENTICE REGISTRATION-SECTION II OMB No. 1205-0223 Expires: 04/30/2015

Warning: This agreement does not constitute a certification under Title 29, CFR, Part 5 for the employment of the apprentice on Federally financed or assisted construction projects. Current certifications must be obtained from the Office of Apprenticeship (OA) or the recognized State Apprenticeship Agency shown below. (Item 24)

The program sponsor and apprentice agree to the terms of the Apprenticeship Standards incorporated as part of this Agreement. The sponsor will not discriminate in the selection and training of the apprentice in accordance with the Equal Opportunity Standards in Title 29 CFR Part 30, and Executive Order 11246. This agreement may be terminated by either of the parties, citing cause(s), with notification to the registration agency, in compliance with Title 29, CFR, Part 29

PART A: TO BE COMPLETED BY APPRENTICE. NOTE TO SPONSOR: PART A SHOULD ONLY BE FILLED OUT BY APPRENTICE.

1. Name (Last, First, Middle) and Address *Social Security Number    -  -      (No., Street, City, State, Zip Code, Telephone Number)      

Answer Both A and B (Voluntary) (Definitions on reverse) 4. a. Ethnic Group (Mark one) Hispanic or Latino Not Hispanic or Latino b. Race (Mark one or more) American Indian or Alaska native Asian Black or African American Native Hawaiian or other Pacific Islander White

5. Veteran Status (Mark one) Non-Veteran Veteran

6. Education Level (Mark one) 8th grade or less 9th to 12th grade GED High School Graduate or Greater Post Secondary or Technical Training

2. Date of Birth (Mo., Day, Yr.)      

3. Sex (Mark one) Male Female

7a. Employment Status (Mark one) New Employee Existing Employee 7b. Career Connection Linkage or Direct Entry (Mark one) (Instructions on reverse) None None One-Stop Referral Pre-Appenticeship Trade Adjustment Assistance Technical Traning School Military Veterans Job Corps YouthBuild School-to-Registered Apprenticeship HUD/STEP-UP Career Center Referral Direct Entry:      School-to-Registered Apprenticeship

8. Signature of Apprentice Date            

9. Signature of Parent/Guardian (if minor) Date            

PART B: SPONSOR: EXCEPT FOR ITEMS 6, 7, 8, 10a. -10c, REMAINDER OF ITEMS REPOPULATED FROM PROGRAM REGISTRATION.

1. Sponsor Program No.       Sponsor Name and Address (No. Street, City, County, State, Zip Code)      

2a Occupation (The work processes listed in the standards are part of this agreement).      

2b Occupation Code:      2b.1. Interim Credentials Only applicable to Part B, 3.b. and 3.c. (Mark one) Yes No

3. Occupation Training Approach (Mark one) 3a. Time-Based 3b. Competency-Based 3c. Hybrid

4. Term (Hrs., Mos., Yrs.)      

5. Probationary Period (Hrs., Mos., Yrs.)      

6. Credit for Previous Experience (Hrs., Mos., Yrs.)      

7. Term Remaining (Hrs., Mos., Yrs.)      

8. Date Apprenticeship Begins      

9a. Related Instruction (Number of Hours Per Year)      

9b. Apprentice Wages for Related Instruction Will Be Paid Will Not Be Paid

9c. Related Training Instruction Source      

10. Wages: (Instructions on reverse)

10a. Pre-Apprenticeship Hourly Wage $       10b. Apprentice’s Entry Hourly Wage $      10c. Journeyworker’s Hourly Wage $     

Check Box

Period 1

2

3

4

5

6

7

8

9

10

10d. Term Hrs., Mos., or Yrs.

     

     

     

     

     

     

     

     

     

     

10e. Wage Rate (Mark one) % or $

     

     

     

     

     

     

     

     

     

     

11. Signature of Sponsor’s Representative(s) Date Signed            

13. Name and Address of Sponsor Designee to Receive Complaints (If applicable)      

12. Signature of Sponsor’s Representative(s) Date Signed            

PART C: TO BE COMPLETED BY REGISTRATION AGENCY

1. Registration Agency and Address      

2. Signature (Registration Agency)      

3. Date Registered      

4. Apprentice Identification Number (Definition on reverse):      

Program Definitions and/or Instructions:

Part A

Item 4.a. Definition - Ethnic Group:

Hispanic or Latino. A person of Cuban, Mexican, Puerto Rican, South or Central American, or other Spanish culture or origin, regardless of race. The

term, “Spanish origin,” can be used in addition to “Hispanic or Latino.”

Item 4.b. Definitions - Race:

American Indian or Alaska Native. A person having origins in any of the original peoples of North and South America (including Central America), and who maintains tribal affiliation or community attachment.

Asian. A person having origins in any of the original peoples of the Far East, Southeast Asia, or the Indian subcontinent including, for example, Cambodia, China, India, Japan, Korea, Malaysia, Pakistan, the Philippine Islands, Thailand, and Vietnam.

Black or African American. A person having origins in any of the black racial groups of Africa. Terms such as “Haitian” or “Negro” can be used in addition to “Black or African American.”

Native Hawaiian or Other Pacific Islander. A person having origins in any of the original peoples of Hawaii, Guam, Samoa, or other Pacific Islands.

White. A person having origins in any of the original peoples of Europe, the Middle East, or North Africa.

Item 7b. Instructions:

Indicate any career connection linkage (definitions follow) or direct entry. Enter “None” if no career career connection linkage or direct entry applies.

Career linkage includes participation in programs that provided employment, training and other services to adults, youth and dislocated workers. Funds for these activities are provided by the U.S. Department of Labor/Employment and Training Administration (U.S. DOL/ETA) to states and local communities.

Pre-Apprenticeship. A program or set of strategies designed to prepare individuals to enter and succeed in a Registered

Apprenticeship program which has or have a documented partnership(s) with a Registered Apprenticeship program(s).

Technical Training School. Graduates trained in an occupation from a technical training school related to an occupation

registered by the program sponsor and who meet the minimum qualifications for Registered Apprenticeship

Military Veterans. Veterans that completed a military technical training school and/or elect to participate in the Building and

Construction Trades Helmets to Hardhats program or trained in an occupation while in the military related to an occupation

registered by the program sponsor and who meet the minimum qualifications for Registered Apprenticeship.

Job Corps. Graduates trained in an occupation from a federally funded Job Corps center related to an occupation registered

by the program sponsor and who meet the minimum qualifications for Registered Apprenticeship.

One-Stop Referral. Includes Workforce Investment Act (WIA) and Employment Services (ES) participants referred to the Registered Apprenticeship program and/or apprentices that receive WIA funded services that support their participation in their Registered Apprenticeship program.

Trade Adjustment Assistance. Includes trade-affected workers who have become unemployed as a result of increased imports or shifts in

production out of the United States.

Job Corps. Youth ages 16-24 years usually receiving services in a residential setting.

YouthBuild. Program transferred from the U.S. Department of Housing and Urban Development (HUD) to U.S. DOL/ETA in September 2006. It assists youth ages 16-24 to obtain education and skill training and advance toward post-secondary education and career pathways in construction and other high growth, high demand occupations while building affordable housing in their communities.

Graduates trained in an occupation from a federally funded YouthBuild program related to an occupation registered by the

program sponsor and who meet the minimum qualifications for Registered Apprenticeship.

School-to-Registered Apprenticeship. Program designed to allow high school youth ages 16 - 17 to enter a Registered Apprenticeship program and continue after graduation with full credit given for the high school portion.

HUD/STEP-UP. Developed in conjunction with HUD. The program provides the actual apprenticeship experience and the framework for moving into high-skill Registered Apprenticeship.Applicants who successfully participated in the U.S. Department of Housing and Urban Development Step-Up program and received an apprenticeship experience which meets the minimum qualifications for Registered Apprenticeship.

Career Center Referral. Includes career center participants referred to the Registered Apprenticeship program and/or apprentices(s)

that receive workforce system funded servicesthat support their participation in a Registerd Apprenticeship program. This may include the use of individual training accounts and/or on-the-job training.reimbursements.

School-to-Registered Apprenticeship. Program designed to allow high school youth ages 16 - 17 to enter a Registered Apprenticeship program

and continue after graduation with full credit given for the high school portion.

Direct Entry. A graduate from an accredited technical training school, Job Corps training program, Youth Build Program, or a participant in a military apprenticeship program, any of which training is specifically related to the occupation and incorporated in the Registered Apprenticeship standards. Also, insert the name of the program.

Part B

Item 2.b.1. Interim Credentials. Based on program standards that utilize the competency-based or hybrid training approach, and, upon request of the program sponsor, the credentials are issued as certificates by the Registration Agency. Interim credentials provide certification of competency attainment by an apprentice.

Item 3. Occupation Training Approach. The program sponsor decides which of the three training methods to use in the program as follows:

3.a. Time-Based Training Approach - apprentice required to complete a specific number of hours of on-the-job learning (OJL) and related training instruction (RTI).

3.b. Competency-Based Training Approach - apprentice required to demonstrate competency in defined subject areas and does not require any specific hours of OJL or RTI; or

3.c. Hybrid-Training Approach - apprentice required to complete a minimum number of OJL and RTI hours and demonstrate competency in the defined subject areas.

Item 4. Term (Hrs., Mos., Yrs.). Based on the program sponsor’s training approach. See Part B, Item 4. Available in the terms of the Apprenticeship Standards.

Item 5. Probationary Period (Hrs. Mos., Yrs.) Probation period cannot exceed 25 percent of the length of the program or one year, whichever is shorter.

Item 7. Term Remaining (Hrs., Mos., Yrs.). After Part B, Item 6., Credit for Previous Experience (Hrs., Mos., Yrs.) is determined by the program sponsor. The Term Remaining (Hrs., Mos., Yrs.) in Part B, Item 7., for the apprentice to complete the apprenticeship is based on the training approach indicated above in Part B, Item 3. The term remaining is available in the terms of the Apprenticeship Standards.

Item 10. Wage Instructions:

10a. Pre-Apprentice hourly wage: sponsor enters the individual’s hourly wage in the quarter prior to becoming an apprentice.

10b. Apprentice’s entry hourly wage (hourly dollar amount paid): sponsor enters this apprentice’s entry hourly wage.

10c. Journeyworker’s wage: sponsor enters wage per hour.

10d. Term: sponsor enters in each box the apprentice schedule of pay for each advancement period based on the program sponsor’s training

approach. See Part B, Item 3., and is available in the terms of the Apprenticeship Standards.

10e. Percent or dollar amount: sponsor marks one.

Note: 10c. If the employer is signatory to a collective bargaining agreement, the journeyworker’s wage rate in the applicable collective bargaining

agreement is identified. Apprenticeship program sponsors not covered by a collective bargaining agreement must identify a minimum

journeyworker’s hourly wage rate that will be the basis for the progressive wage schedule identified in Item 10e. of this agreement.

10d. The employer agrees to pay the hourly wage rate identified in this section to the apprentice each period of the apprenticeship based on the successful completion of the training approach and related instructions outlined in the Apprenticeship Standards. The period may be expressed in hours, months, or years.

10e. The wage rates are expressed either as a percent or in dollars and cents of the journeyworker’s wage depending on the industry.

Example (Time-based approach) - 3 YEAR APPRENTICESHIP PROGRAM

Term Period 1 Period 2 Period 3 Period 4 Period 5 Period 6

hrs., mos., yrs. 1000 hrs. 1000 hrs. 1000 hrs. 1000 hrs. 1000 hrs. 1000 hrs.

% 55 60 65 70 80 90

Example (Time-based approach) - 4 YEAR APPRENTICESHIP PROGRAM

Term Period 1 Period 2 Period 3 Period 4 Period 5 Period 6 Period 7 Period 8

hrs., mos., yrs. 6 mos. 6 mos. 6 mos. 6 mos. 6 mos. 6 mos. 6 mos. 6 mos.

% 50 55 60 65 70 75 80 90

Item 13. Identifies the individual or entity responsible for receiving complaints (Code of Federal Regulations, CFR, Title 29 part 29.7(k)).

Part C.

Item 4. Definition: The Registered Apprenticeship Partners Information Data System (RAPIDS) encrypts the apprentice’s social security number and generates a unique identification number to identify the apprentice. It replaces the social security number to protect the apprentice’s privacy.

*The submission of your social security number is requested. The apprentice’s social security number will only be used to verify the apprentice’s periods of employment and wages for purposes of complying with the Office of Management and Budget related to common measures of the Federal job training and employment programs for measuring performance outcomes and for purposes of the Government Performance and Results Act. The Office of Apprenticeship will use wage records through the Wage Record Interchange System and needs the apprentice’s social security number to match this number against the employers’ wage records. Also, the apprentice’s social security number will be used, if appropriate, for purposes of the Davis Bacon Act of 1931, as amended, U.S. Code Title 40, Sections 276a to 276a-7, and Title 29 CFR 5, to verify and certify to the U.S. Department of Labor, Wage and Hour Division, that you are a registered apprentice to ensure that the employer is complying with the geographic prevailing wage of your occupational classification. Failure to disclose your social security number on this form will not affect your right to be registered as an apprentice. Civil and criminal provisions of the Privacy Act apply to any unlawful disclosure of your social security number, which is prohibited.

The collection and maintenance of the data on ETA-671, Apprentice Registration – Section II Form, is authorized under the National Apprenticeship Act, 29 U.S.C. 50, and CFR 29 Part 29.1. The data is used for apprenticeship program statistical purposes and is maintained, pursuant to the Privacy Act of 1974 (5 U.S.C. 552a.), in a system of records entitled, DOL/ETA-4, Registered Apprenticeship Partners Information Management Data System (RAPIDS) at the U.S. Department of Labor, Office of Apprenticeship,. Data may be disclosed to a State Apprenticeship Agency to determine an assessment of skill needs and program information, and in connection with federal litigation or when required by law.

Persons are not required to respond to this collection of information unless it displays a currently valid OMB control number. Public reporting burden for this collection of information is estimated to average five minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. The obligation to respond is required to obtain or retain benefits under 29 USC 50. Send comments regarding this burden or any other aspect of this collection of information including suggestions for reducing this burden to the U.S. Department of Labor, Office of Apprenticeship, 200 Constitution Avenue, N.W., Room N-5311, Washington, D.C. 20210 (Paperwork Reduction Project 1205-0023.)

Page 1 of 3 ETA 671 – Section II (May 2012)