30 CFR Part 250, Subpart G, Well Operations and Equipment.

OMB 1014-0028

The Bureau of Safety and Environmental Enforcement (BSEE) regulations located at 30 CFR Part 250, Subpart G--Well Operations and Equipment consolidate common equipment and operational functions regarding Blowout Preventers (BOPs) to ensure safe drilling, workover, completion, and decommissioning operations and to protect the human, marine, and coastal environment. BSEE analyzes and evaluates these information/requirements to reduce the likelihood of a similar Deepwater Horizon event and to reduce the risk of fatalities, injuries, and spills.

The latest form for 30 CFR Part 250, Subpart G, Well Operations and Equipment. expires 2023-01-31 and can be found here.

Latest Forms, Documents, and Supporting Material

Document Name
1014-0028 30-day FRN published [87 FR 56975] exp. 10-17-22.pdf Supplementary Document
1014-0028 60-day FRN published 1-20-22 [87 FR 3121] exp. 3-21-22.pdf Supplementary Document
eCFR __ 30 CFR Part 250 Subpart G -- Well Operations and Equipment.pdf Supplementary Document
1014-0028-SS-2023.docx Supporting Statement A
250.751 - BOP and coiled tubing tests
250.746(f) - Retain pressure tests, actuations, and inspections in daily report
250.746 - Casing and liner presser tests
250.745 - Varies records of operations
250.742 - Core analyses
250.742 - Velocity profiles and surveys
250.742 - Directional and vertical-well surveys
250.742 - Well logging operations
250.740; 741; 724(b) - Retain data for 2 years after completion
250.740; 741; 724(b) - Drilling records
250.740; 711(b); 724(b); 738(c); 745; 746 - Required Info.
250.740; 711(b); 724(b); 738(c); 745; 746 - Daily report/records
250.739(b) - ITP report documenting inspection
250.739 - meet/exceed API Standard 53
250.738(o) - ITP report re failure of redundant control
250.738(m) - ITP report re-equipment design and suitability
250.738(k) - Latching up BOP stack/re-establishing power
250.738(g) - Demonstrate well-control procedures
250.738(f) - BOP configuration changes
250.738(i) - ITP report - fit for service
250.738; 746(e) - DM Approval - 2 barriers in place prior to BOP removal
250.738; 746(e) - DM Approval - Well control demands above rating pressure
250.738; 746(e) - DM Approval - Prior to resuming operations for new/repaired/reconfigured BOP
250.738; 746(e) - DM Approval - Put well in safe condition
250.738; 746(e) - DM Approval - problems, issues, leaks
250.738; 746(e) - DM Approval
250.737(e) - 72 hour advance notice of location of shearing ram tests
250.737(d)(12) - Make available upon request.
250.737(d)(12) - Document all autoshear, EDS, and deadman test results
250.737(d)(2), (d)(3), (d)(4) - Results w/in 72 hours after completion
250.737(d)(2), (d)(3), (d)(4) - Notify DM 72 hours prior to testing
250.737(d)(5) - Alternating testing schedule
250.737(c); 746(a), (b), (c), (d) - Record time, date, and results
250.737(a)(4) (d)(10) - Quarterly reports
250.737(a)(4) (d)(10) - 21-day BOP testing frequency
250.734(a)(9); 738(n) - Labeling
250.734(a)(7) - Additional information / acoustic control system
250.734(a)(7) - Acoustic control system
250.732(d) - Documentation that demonstrates compliance
250.732(c) - Verification that an ITP conducted detailed reviews
250.732(a) - Submit ITP verification
250.730(d)(1) - Alternate approval from using to API Spec. Q1
250.730(c)(3) - Submit report re design change/modified procedures
250.730(c)(2) - Extension Request
250.730(c)(2) - Analysis report re equipment failure
250.730(c)(1) - Written notice of equipment failure
250.730(a)(4) - Schematic drawings
250.724(c) - Develop and implement a RTM plan
250.724 - Transmit RTM data onshore
250.723(d) - Request exceptions prior to moving rig
250.722(b)(3) - Pressure test after repairs
250.722 - Successful pressure test
250.722 - Evaluation results report
250.721(g)(6) - failed negative pressure test
250.721(g)(5) - Test Results
250.721(d), (f), (g) - plans to re-cement, repair, etc.
250.720(d) - Intervention Operations
250.720(a)(3) - Resuming Operations
250.720(a) - Interrupting Operations
250.715 - GPS for MODUs - Rent GPS
250.715 - GPS for MODUs - Monthly tracking fee
250.715 - GPS for MODUs - Install
250.715 - GPS for MODUs - tracking/locator data
250.714 - Dropped Objects Plan
250.713(a), (b) - Foundation Requirements
250.713(a), (b) - Fitness Requirements
250.712(d) - Construction Repairs/Mods to MODU/Rig
250.712(c), (e) - Warm or Cold Stacked
250.712(a), (b), (f) - Updated Rig Movement Form
250.712(a), (b), (f) - Rig Movement Notification Report Other-eWell Screenshots
250.712(a), (b), (f) - Notify BSEE of Rig Movements
250.711(b), (c) - Daily Drill Report
250.710(b); 738(p) - Well-Control Drill Plan
250.710(a) - Safety Meetings

OMB Details

250.710(a) - Safety Meetings

Federal Enterprise Architecture: Energy - Energy Production

202201-1014-001	Revision of a currently approved collection	2022-09-16
201908-1014-001 Approved with change	Extension without change of a currently approved collection	2019-11-27
201905-1014-009 Approved without change	Revision of a currently approved collection	2019-05-03
201811-1014-001 Comment filed on proposed rule and continue	Revision of a currently approved collection	2018-12-13
201607-1014-001 Approved without change	Revision of a currently approved collection	2016-07-28
201510-1014-001 Preapproved	New collection (Request for a new OMB Control Number)	2016-04-08
201301-1014-002 Comment filed on proposed rule	New collection (Request for a new OMB Control Number)	2015-04-17